X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fdts%2FWBMR.dts;h=9711a31cb2f9c1715a13dccb19bcdf6cff521ae8;hb=7bab49fd7a6a870d4b7f67edce5a9b74c5edb7d0;hp=60a750891715d4a64fd7f5b9562cf5020571ff41;hpb=07825014834a72fbdc52f193a0473a75a600e3e3;p=openwrt%2Fopenwrt.git diff --git a/target/linux/lantiq/dts/WBMR.dts b/target/linux/lantiq/dts/WBMR.dts index 60a7508917..9711a31cb2 100644 --- a/target/linux/lantiq/dts/WBMR.dts +++ b/target/linux/lantiq/dts/WBMR.dts @@ -1,12 +1,26 @@ /dts-v1/; -/include/ "ar9.dtsi" +#include "ar9.dtsi" + +#include / { + compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9"; model = "WBMR - Buffalo WBMR-HP-G300H"; chosen { - bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &online_green; + led-usb = &usb; + led-wifi = &wifi; }; memory@0 { @@ -22,40 +36,41 @@ #address-cells = <1>; #size-cells = <1>; - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; - read-only; - }; - - partition@40000 { - label = "uboot_env"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@20000 { - label = "firmware"; - reg = <0x60000 0x1f20000>; - }; - - partition@0x1fc0000 { - label = "board"; - reg = <0x1fc0000 0x20000>; - read-only; - }; - - partition@0x1fe0000 { - label = "calibration"; - reg = <0x1fe0000 0x20000>; - read-only; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x60000 0x1f20000>; + }; + + boardconfig: partition@1fc0000 { + label = "board"; + reg = <0x1fc0000 0x20000>; + read-only; + }; + + partition@1fe0000 { + label = "calibration"; + reg = <0x1fe0000 0x20000>; + read-only; + }; }; }; - - mac_addr { - compatible = "lantiq,eth-mac"; - reg = <0 0x1fd0024 0x6>; - }; }; gpio: pinmux@E100B10 { @@ -84,11 +99,12 @@ etop@E180000 { phy-mode = "rgmii"; + mtd-mac-address = <&boardconfig 0x10024>; }; ifxhcd@E101000 { status = "okay"; - gpios = <&gpio 36 0>; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; }; pci@E105400 { @@ -104,64 +120,65 @@ wps { label = "wps"; - gpios = <&gpio 0 1>; - linux,code = <0x211>; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; }; reset { label = "reset"; - gpios = <&gpio 37 1>; - linux,code = <0x198>; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = ; }; eject { label = "eject"; - gpios = <&gpio 34 1>; - linux,code = <0xf7>; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + linux,code = ; }; movie { label = "movie"; - gpios = <&gpio 22 1>; - linux,code = <0x109>; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; - power { - label = "power"; - gpios = <&gpio 1 1>; + power_green: power { + label = "wbmr:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; - power2 { - label = "power2"; - gpios = <&gpio 5 1>; + power_red: power2 { + label = "wbmr:red:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; security { - label = "security"; - gpios = <&gpio 14 1>; + label = "wbmr:yellow:security"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; - wifi { - label = "wifi"; - gpios = <&gpio 15 1>; + wifi: wifi { + label = "wbmr:green:wireless"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; - dsl { - label = "dsl"; - gpios = <&gpio 16 1>; + dsl: dsl { + label = "wbmr:green:dsl"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; - online { - label = "online"; - gpios = <&gpio 17 1>; + online_green: online { + label = "wbmr:green:internet"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; online2 { - label = "online2"; - gpios = <&gpio 18 1>; + label = "wbmr:red:internet"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; movie { - label = "movie"; - gpios = <&gpio 20 1>; + label = "wbmr:blue:movie"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; - usb { - label = "usb"; - gpios = <&gpio 28 1>; + usb: usb { + label = "wbmr:green:usb"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; default-state = "on"; }; };