X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fmediatek%2Ffilogic%2Fbase-files%2Fetc%2Fboard.d%2F01_leds;h=206f7788f53d3886fb2329eb1c941ab8996d7c05;hb=eebf86555722650bddd3424fffc1216ca9df9891;hp=ea126bc46f9e40553536b0814b08b5d7e96ef9ba;hpb=dcdcfc15115a1038e90f21f5aa41726d9c7e2fe5;p=openwrt%2Fstaging%2Fjow.git

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index ea126bc46f..206f7788f5 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -6,13 +6,33 @@ board=$(board_name)
 board_config_update
 
 case $board in
+confiabits,mt7981)
+	ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan3" "lan3" "blue:lan-3" "lan3" "link tx rx"
+	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
+	;;
+bananapi,bpi-r3-mini)
+	ucidef_set_led_netdev "lan1" "LAN" "mdio-bus:0e:green:lan" "eth0" "link_2500 link_1000 tx rx"
+	ucidef_set_led_netdev "lan2" "LAN" "mdio-bus:0e:yellow:lan" "eth0" "link_2500 link_100 tx rx"
+	ucidef_set_led_netdev "wan1" "WAN" "mdio-bus:0f:green:wan" "eth1" "link_2500 link_1000 tx rx"
+	ucidef_set_led_netdev "wan2" "WAN" "mdio-bus:0f:yellow:wan" "eth1" "link_2500 link_100 tx rx"
+	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan-1" "phy0-ap0"
+	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan-2" "phy1-ap0"
+	;;
+bananapi,bpi-r4)
+	ucidef_set_led_netdev "wan" "wan" "mt7530-0:00:green:lan" "wan" "link tx rx"
+	ucidef_set_led_netdev "lan1" "lan1" "mt7530-0:01:green:lan" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan2" "lan2" "mt7530-0:02:green:lan" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan3" "lan3" "mt7530-0:03:green:lan" "lan3" "link tx rx"
+	;;
 cudy,wr3000-v1)
 	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
 	;;
 mercusys,mr90x-v1)
-	ucidef_set_led_netdev "lan0" "lan0" "green:lan0" "lan0" "link tx rx"
-	ucidef_set_led_netdev "lan1" "lan2" "green:lan1" "lan1" "link tx rx"
-	ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx"
+	ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"
 	ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
 	;;
 netgear,wax220)
@@ -20,15 +40,31 @@ netgear,wax220)
 	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
 	;;
-xiaomi,mi-router-wr30u-112m-nmbm|\
+routerich,ax3000)
+	ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan-3" "lan-3" "blue:lan-3" "lan3" "link tx rx"
+	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
+	ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
+	;;
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,mi-router-wr30u-ubootmod)
-	ucidef_set_led_netdev "wan" "wan" "blue:network" "wan"
+	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
 	;;
 xiaomi,redmi-router-ax6000-stock|\
 xiaomi,redmi-router-ax6000-ubootmod)
 	ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
 	;;
+zbtlink,zbt-z8103ax)
+	ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
+	;;
+zyxel_ex5601-t0-stock|\
+zyxel,ex5601-t0-ubootmod)
+	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx"
+	ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx"
+	ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
+	ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
+        ;;
 esac
 
 board_config_flush