X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fmvebu%2Fbase-files%2Fetc%2Fboard.d%2F02_network;fp=target%2Flinux%2Fmvebu%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=283a8562582d6f8e08b212372bfaf27829a438cb;hb=12795ec9f16ba79cdde052f2e20f4a1bddc6235d;hp=69c63e3791688c4f40f7efb2d88f68153e615353;hpb=5e5e92b7c3e751affa067a365f1787cd8e5ffb10;p=openwrt%2Fstaging%2Fnoltari.git

diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 69c63e3791..283a856258 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -52,17 +52,21 @@ marvell,axp-gp)
 methode,udpu)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	;;
-solidrun,clearfog*a1)
+solidrun,clearfog-a1|solidrun,clearfog-pro-a1)
 	# eth0 is standalone ethernet
-	# eth1 is switch (-pro) or standalone ethernet (-base)
+	# eth1 is switch
 	# eth2 is SFP
 	ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
 
-	# if switch exists (clearfog-pro)
 	# switch port 5 is connected to eth1
-	swconfig list 2>&1 | grep -q switch0 && \
-		ucidef_add_switch "switch0" \
-			"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
+	ucidef_add_switch "switch0" \
+		"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
+	;;
+solidrun,clearfog-base-a1)
+	# eth0 is standalone ethernet
+	# eth1 is standalone ethernet
+	# eth2 is SFP
+	ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
 	;;
 *)
 	ucidef_set_interface_lan "eth0"