X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F10-rt2x00-eeprom;h=7bd58d5facb9f8b7b64bed8093f4720124af8bef;hb=e4e24c5512901afa3a4bc55824b5dd467d3fcc5c;hp=0f50c9bc1b5e772e3e3a210fb079f6e321a6366e;hpb=9085b05d9e713e48edc2fe76346ae04687f018ca;p=openwrt%2Fstaging%2Fmkresin.git diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 0f50c9bc1b..7bd58d5fac 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -23,13 +23,14 @@ rt2x00_eeprom_extract() { [ -e /lib/firmware/$FIRMWARE ] && exit 0 -case "$FIRMWARE" in -"RT288X.eeprom" | \ -"RT305X.eeprom") - . /lib/ramips.sh +. /lib/ramips.sh - local board=$(ramips_board_name) +board=$(ramips_board_name) +case "$FIRMWARE" in +"RT288X.eeprom" | \ +"RT305X.eeprom" | \ +"RT3883.eeprom") case $board in dir-300-b1 | \ dir-600-b1 | \ @@ -37,31 +38,59 @@ case "$FIRMWARE" in rt2x00_eeprom_extract "devdata" 16384 272 ;; + rt-n10-plus | \ rt-g32-b1) rt2x00_eeprom_extract "devconf" 0 272 ;; + f5d8235-v1 | \ f5d8235-v2) rt2x00_eeprom_extract "u-boot" 262144 272 ;; + all0256n | \ argus-atp52b | \ + bc2 | \ + esr-9753 | \ fonera20n | \ hw550-3g | \ mofi3500-3gn | \ pwh2004 | \ + nbg-419n | \ nw718 | \ + omni-emb | \ rt-n15 | \ + rt-n56u | \ + sl-r7205 | \ + v11st-fe | \ v22rw-2x2 | \ - wcr150gn | \ + w502u | \ + wcr-150gn | \ whr-g300n | \ - wr512-3gn) + wl-330n | \ + wl-351 | \ + wli-tx4-ag300n | \ + wr512-3gn | \ + wr6202 | \ + xdxrn502j) rt2x00_eeprom_extract "factory" 0 272 ;; + wl341v3) + rt2x00_eeprom_extract "board-nvram" 64880 272 + ;; + *) rt2x00_eeprom_die "board $board is not supported yet" ;; esac ;; + +"rt2x00pci_1_0.eeprom") + case $board in + rt-n56u) + rt2x00_eeprom_extract "factory" 32768 272 + ;; + esac + ;; esac