X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2F3G150B.dts;h=afe9fafe9bea385769a43acadbbb93e980824c1c;hb=c25d9cbde8297452978cbd70937fe91434546ded;hp=a8387a45f6eb84b1518b5e859a68b00fda6482a0;hpb=1a392636a5b5694178d5f802efa9c220ff9dbabf;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/3G150B.dts b/target/linux/ramips/dts/3G150B.dts
index a8387a45f6..afe9fafe9b 100644
--- a/target/linux/ramips/dts/3G150B.dts
+++ b/target/linux/ramips/dts/3G150B.dts
@@ -1,94 +1,25 @@
 /dts-v1/;
 
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-	compatible = "3G150B", "ralink,rt5350-soc";
+	compatible = "tenda,3g150b", "ralink,rt5350-soc";
 	model = "Tenda 3G150B";
 
-	palmbus@10000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "s25fl064k";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "s25fl064k";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x3b0000>;
-				};
-			};
-		};
-
-		gpio1: gpio@660 {
-			status = "okay";
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
-	};
-
-	esw@10110000 {
-		ralink,portmap = <0x2f>;
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-		ralink,led-polarity = <1>;
-	};
-
-	ehci@101c0000 {
-		status = "okay";
-	};
-
-	ohci@101c1000 {
-		status = "okay";
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 
 		ap {
 			label = "3g150b:blue:ap";
-			gpios = <&gpio0 7 1>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
 		3g {
 			label = "3g150b:blue:3g";
-			gpios = <&gpio0 14 1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -100,8 +31,8 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
 
@@ -112,7 +43,76 @@
 		usb {
 			gpio-export,name = "usb";
 			gpio-export,output = <1>;
-			gpios = <&gpio0 13 0>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+	mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+	ralink,led-polarity = <1>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};