X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDCH-M225.dts;h=a809546fabbe4b22c5eb71996445f6de2115d1d1;hb=d70ec3008d4cd0540a9f6c88fb7e786107f1679a;hp=867335e95720370a9f6246bb86ca933f60e1c877;hpb=70b192f57358f753842cbe1f8f82e26e8c6f9e1e;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/DCH-M225.dts b/target/linux/ramips/dts/DCH-M225.dts
index 867335e957..a809546fab 100644
--- a/target/linux/ramips/dts/DCH-M225.dts
+++ b/target/linux/ramips/dts/DCH-M225.dts
@@ -9,10 +9,15 @@
 	compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
 	model = "D-Link DCH-M225";
 
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		wps {
@@ -31,14 +36,16 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		power {
+		led_power: power {
 			label = "dch-m225:green:power";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "on";
 		};
 
 		status {
 			label = "dch-m225:red:status";
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
 	};
 
@@ -90,59 +97,64 @@
 	#sound-dai-cells = <0>;
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_i2s_pins>, <&wm8960_mclk_pins>;
+	pinctrl-0 = <&mdio_refclk_pins>;
 };
 
 &spi0 {
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <80000000>;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x4000>;
-			read-only;
-		};
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
 
-		factory: partition@34000 {
-			label = "factory";
-			reg = <0x34000 0x4000>;
-			read-only;
-		};
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x4000>;
+				read-only;
+			};
 
-		nvram: partition@38000 {
-			label = "nvram";
-			reg = <0x38000 0x8000>;
-			read-only;
-		};
+			factory: partition@34000 {
+				label = "factory";
+				reg = <0x34000 0x4000>;
+				read-only;
+			};
 
-		partition@40000 {
-			label = "devconf";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
+			nvram: partition@38000 {
+				label = "nvram";
+				reg = <0x38000 0x8000>;
+				read-only;
+			};
 
-		partition@50000 {
-			label = "upgrade_rec";
-			reg = <0x50000 0x100000>;
-			read-only;
-		};
+			partition@40000 {
+				label = "devconf";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
 
-		partition@150000 {
-			label = "firmware";
-			reg = <0x150000 0x6b0000>;
+			partition@50000 {
+				label = "upgrade_rec";
+				reg = <0x50000 0x100000>;
+				read-only;
+			};
+
+			partition@150000 {
+				compatible = "seama";
+				label = "firmware";
+				reg = <0x150000 0x6b0000>;
+			};
 		};
 	};
 };
@@ -158,16 +170,9 @@
 			ralink,function = "gpio";
 		};
 
-		pa {
-			ralink,group = "pa";
-			ralink,function = "pa";
-		};
-
-		wm8960_mclk_pins: wm8960_mclk {
-			wm8960_mclk {
-				ralink,group = "mdio";
-				ralink,function = "refclk";
-			};
+		gpio_i2s {
+			ralink,group = "uartf";
+			ralink,function = "gpio i2s";
 		};
 	};
 };
@@ -182,5 +187,6 @@
 
 &wmac {
 	ralink,mtd-eeprom = <&factory 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pa_pins>;
 };
-