X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FFREESTATION5.dts;h=0e38c553d890304814cfd61b46bb37c1de85d0f5;hb=1afca71e581f7b53666ea955abada10f29cf2363;hp=603ec363ea64d8d10b2828fa5c34c80f2400bd07;hpb=699073bdcb34695af6419df7bb052432770d2ce4;p=openwrt%2Fsvn-archive%2Farchive.git

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index 603ec363ea..0e38c553d8 100644
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -22,7 +22,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -53,11 +52,15 @@
 	};
 
 	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x28>;
+		mtd-mac-address = <&factory 0x4>;
 	};
 
 	esw@10110000 {
-		ralink,portmap = <0x01>;
+		mediatek,portmap = <0x01>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
 	};
 
 	otg@101c0000 {
@@ -66,6 +69,7 @@
 
 	gpio-export {
 		compatible = "gpio-export";
+
 		// Used to enable power-over-ethernet passthrough from port0 to port1.
 		// Disable passthrough by default to prevent accidental equipment damage.
 		poe {
@@ -77,18 +81,21 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		// The following leds are defined in the ArcOS firmware, but reportedly
 		// not present in the Freestation5 device.
 		wifi {
-			label = "freestation:unknown:wifi";
+			label = "freestation5:unknown:wifi";
 			gpios = <&gpio0 7 1>;
 		};
+
 		powerg {
-			label = "freestation:unknown:powerg";
+			label = "freestation5:unknown:powerg";
 			gpios = <&gpio0 9 1>;
 		};
+
 		usb {
-			label = "freestation:unknown:usb";
+			label = "freestation5:unknown:usb";
 			gpios = <&gpio0 14 1>;
 		};
 	};