X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FSAP-G3200U3.dts;h=d1d6a534b6f29334234892558f5b35fd9658ec7d;hb=48047b3a5c6aa9fff89a7a9c7ec76d8335b1a8e7;hp=d6f2f3057668ce1d45c757e5b0ad73fe0ddb7eca;hpb=021c8936584ded4feee82939f05098c6894f4c50;p=openwrt%2Fstaging%2Fmkresin.git

diff --git a/target/linux/ramips/dts/SAP-G3200U3.dts b/target/linux/ramips/dts/SAP-G3200U3.dts
index d6f2f30576..d1d6a534b6 100644
--- a/target/linux/ramips/dts/SAP-G3200U3.dts
+++ b/target/linux/ramips/dts/SAP-G3200U3.dts
@@ -2,8 +2,11 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
 	model = "STORYLiNK SAP-G3200U3";
 
 	memory@0 {
@@ -15,31 +18,31 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	gpio-leds {
+	leds {
 		compatible = "gpio-leds";
 
 		usb {
 			label = "sap-g3200u3:green:usb";
-			gpios = <&gpio0 13 1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
 		};
 	};
 
-	gpio-keys-polled {
+	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 16 1>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
 
 		rfkill {
 			label = "rfkill";
-			gpios = <&gpio0 14 1>;
-			linux,code = <0xf7>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
 		};
 	};
 };
@@ -48,63 +51,65 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80", "en25q64";
 		spi-max-frequency = <10000000>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x1000>;
-			read-only;
-		};
-
-		partition@31000 {
-			label = "config";
-			reg = <0x31000 0xf000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x7b0000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x1000>;
+				read-only;
+			};
+
+			partition@31000 {
+				label = "config";
+				reg = <0x31000 0xf000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
 		};
 	};
 };
 
 &pcie {
 	status = "okay";
+};
 
-	pcie0 {
-		mt76@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x8000>;
-			mediatek,2ghz = <0>;
-		};
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
 	};
+};
 
-	pcie1 {
-		mt76@1,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x0000>;
-			mediatek,5ghz = <0>;
-		};
+&pcie1 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0000>;
+		ieee80211-freq-limit = <2400000 2500000>;
 	};
 };