X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FV11STFE.dts;h=244403e05f3832827d2529d4c40d50109b8ca227;hb=e8eaf794ec4105cd59f170371991ff90c5b2ca3b;hp=ae306670cf804b834f27139d2762b1273b5d79ee;hpb=70b192f57358f753842cbe1f8f82e26e8c6f9e1e;p=openwrt%2Fstaging%2Fmkresin.git

diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts
index ae306670cf..244403e05f 100644
--- a/target/linux/ramips/dts/V11STFE.dts
+++ b/target/linux/ramips/dts/V11STFE.dts
@@ -9,51 +9,51 @@
 	compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
 	model = "Ralink V11ST-FE";
 
-	pci@440000 {
-		status = "okay";
-
-		host-bridge {
-			pci-bridge@1 {
-				status = "okay";
-			};
-		};
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
 	};
 
 	nor-flash@1c000000 {
 		compatible = "cfi-flash";
 		reg = <0x1c000000 0x800000>;
 		bank-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		partition@0 {
-			reg = <0x0 0x0030000>;
-			label = "u-boot";
-			read-only;
-		};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		partition@30000 {
-			reg = <0x00030000 0x00010000>;
-			label = "u-boot-env";
-			read-only;
-		};
+			partition@0 {
+				reg = <0x0 0x0030000>;
+				label = "u-boot";
+				read-only;
+			};
 
-		factory: partition@40000 {
-			reg = <0x00040000 0x00010000>;
-			label = "factory";
-			read-only;
-		};
+			partition@30000 {
+				reg = <0x00030000 0x00010000>;
+				label = "u-boot-env";
+				read-only;
+			};
+
+			factory: partition@40000 {
+				reg = <0x00040000 0x00010000>;
+				label = "factory";
+				read-only;
+			};
 
-		partition@50000 {
-			reg = <0x00050000 0x003b0000>;
-			label = "firmware";
+			partition@50000 {
+				compatible = "denx,uimage";
+				reg = <0x00050000 0x003b0000>;
+				label = "firmware";
+			};
 		};
 	};
 
-	gpio-keys-polled {
+	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		wps {
@@ -66,7 +66,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		status {
+		led_status: status {
 			label = "v11st-fe:green:status";
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
@@ -81,6 +81,10 @@
 	status = "okay";
 };
 
+&pci {
+	status = "okay";
+};
+
 &wmac {
 	ralink,mtd-eeprom = <&factory 0>;
 };