X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWHR-1166D.dts;h=0c0f62728c7b42f493784b8849a0a7764e8e5e30;hb=103ed00cfb370236c3e96e427d5feb643a8d7c8e;hp=756d1805d9ad92d31008b1dbeb4f91b3cac67100;hpb=553fea9f195aaefa8533b99e0d0c9ff9a27fc4f5;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
index 756d1805d9..0c0f62728c 100644
--- a/target/linux/ramips/dts/WHR-1166D.dts
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -1,138 +1,46 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
 
 / {
 	compatible = "ralink,mt7620a-soc";
 	model = "Buffalo WHR-1166D";
 
-	palmbus@10000000 {
-		gpio2: gpio@660 {
-			status = "okay";
-		};
-
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "en25q64";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "mx25l6405d";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0xfb0000>;
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uartf", "wled", "nd_sd";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
-		port@5 {
-			status = "okay";
-			phy-handle = <&phy5>;
-			phy-mode = "rgmii";
-		};
-
-		mdio-bus {
-			status = "okay";
-
-			phy5: ethernet-phy@5 {
-				reg = <5>;
-				phy-mode = "rgmii";
-			};
-		};
-	};
-
-	gsw@10110000 {
-		ralink,port4 = "ephy";
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	pcie@10140000 {
-		status = "okay";
-
-		pcie-bridge {
-			mt76@0,0 {
-				reg = <0x0000 0 0 0 0>;
-				device_type = "pci";
-				mediatek,mtd-eeprom = <&factory 32768>;
-				mediatek,2ghz = <0>;
-			};
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 
 		power {
-			label = "buffalo:red:power";
+			label = "whr-1166d:red:power";
 			gpios = <&gpio0 7 1>;
 		};
 
 		wifi {
-			label = "buffalo:green:wifi";
+			label = "whr-1166d:green:wifi";
 			gpios = <&gpio0 8 1>;
 		};
 
 		power2 {
-			label = "buffalo:green:power";
+			label = "whr-1166d:green:power";
 			gpios = <&gpio0 9 1>;
 		};
 
 		wifi2 {
-			label = "buffalo:orange:wifi";
+			label = "whr-1166d:orange:wifi";
 			gpios = <&gpio0 10 1>;
 		};
 
 		internet {
-			label = "buffalo:green:internet";
+			label = "whr-1166d:green:internet";
 			gpios = <&gpio2 17 1>;
 		};
 
 		router {
-			label = "buffalo:orange:router";
+			label = "whr-1166d:orange:router";
 			gpios = <&gpio2 18 1>;
 		};
 
 		router2 {
-			label = "buffalo:green:router";
+			label = "whr-1166d:green:router";
 			gpios = <&gpio2 19 1>;
 		};
 	};
@@ -170,3 +78,93 @@
 		};
 	};
 };
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80", "mx25l6405d";
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0xfb0000>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartf", "wled", "nd_sd";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4 = "ephy";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+	status = "okay";
+
+	pcie-bridge {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&factory 32768>;
+			mediatek,2ghz = <0>;
+		};
+	};
+};