X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWHR-G300N.dts;h=da861ce66e4202a6df6cc7a5abf1dfdc7ffd2f87;hb=a5bd8de0bd80b83e43ce90ddc6623890344ad33d;hp=d919405ce3effe9f533f3bdd1b4126a6d697fc8f;hpb=10d8e4b66c9f68de7889cc82bde7ed8ee01dfcd4;p=openwrt%2Fstaging%2Fwigyori.git

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
index d919405ce3..da861ce66e 100644
--- a/target/linux/ramips/dts/WHR-G300N.dts
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -1,63 +1,68 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-	compatible = "WHR-G300N", "ralink,rt3052-soc";
+	compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
 	model = "Buffalo WHR-G300N";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-	};
-
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-	};
 
-	ethernet@10100000 {
-		status = "okay";
-	};
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3a0000>;
+		};
 
-	esw@10110000 {
-		status = "okay";
-		ralink,portmap = <0x2f>;
+		partition@3f0000 {
+			label = "user";
+			reg = <0x3f0000 0x10000>;
+			read-only;
+		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		diag {
 			label = "whr-g300n:red:diag";
-			gpios = <&gpio0 7 1>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
+
 		router {
 			label = "whr-g300n:green:router";
-			gpios = <&gpio0 9 1>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
+
 		security {
 			label = "whr-g300n:amber:security";
-			gpios = <&gpio0 14 1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -66,29 +71,46 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <0x198>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
 		};
+
 		aoss {
 			label = "aoss";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x211>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
 		};
+
 		router-off {
 			label = "router-off";
-			gpios = <&gpio0 11 1>;
-			linux,code = <0x102>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_2>;
 		};
+
 		router-on {
 			label = "router-on";
-			gpios = <&gpio0 8 1>;
-			linux,code = <0x103>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_3>;
 		};
 	};
+};
 
-	wmac@10180000 {
-		status = "okay";
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
 	};
 };
+
+&esw {
+	mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};