X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWL-351.dts;h=ecda696732c30f35c3d6610fd99407f5e4085f7f;hb=9195d8da;hp=f8317e07acfd495c8e3a3b064158cf2353ca3803;hpb=e468abcae08b82174ab086261a8767e468b720ed;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
index f8317e07ac..ecda696732 100644
--- a/target/linux/ramips/dts/WL-351.dts
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -1,33 +1,14 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
 	compatible = "WL-351", "ralink,rt3052-soc";
 	model = "Sitecom WL-351 v1 002";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
-			ralink,gpiomux = "i2c", "spi", "mdio";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-
-	};
-
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -57,41 +38,19 @@
 		};
 	};
 
-	ethernet@10100000 {
-		status = "okay";
-	};
-
-	esw@10110000 {
-		status = "okay";
-		ralink,portmap = <0x3f>;
-		ralink,fct2 = <0x0002500c>;
-		/*
-		 * ext phy base addr 31, rx/tx clock skew 0,
-		 * turbo mii off, rgmi 3.3v off, port 5 polling off
-		 * port5: enabled, gige, full-duplex, rx/tx-flow-control
-		 * port6: enabled, gige, full-duplex, rx/tx-flow-control
-		*/
-		ralink,fpa2 = <0x1f003fff>;
-	};
-
-	wmac@10180000 {
-		status = "okay";
-	};
-
-	otg@101c0000 {
-		status = "okay";
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "wl-351:amber:power";
 			gpios = <&gpio0 8 1>;
 		};
+
 		unpopulated {
 			label = "wl-351:amber:unpopulated";
 			gpios = <&gpio0 12 1>;
 		};
+
 		unpopulated2 {
 			label = "wl-351:blue:unpopulated";
 			gpios = <&gpio0 13 1>;
@@ -103,11 +62,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -116,8 +77,41 @@
 	};
 
 	rtl8366rb {
-		compatible = "rtl8367rb";
+		compatible = "rtl8366rb";
 		gpio-sda = <&gpio0 1 0>;
 		gpio-sck = <&gpio0 2 0>;
 	};
 };
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+	mediatek,portmap = <0x3f>;
+	ralink,fct2 = <0x0002500c>;
+	/*
+	 * ext phy base addr 31, rx/tx clock skew 0,
+	 * turbo mii off, rgmi 3.3v off, port 5 polling off
+	 * port5: enabled, gige, full-duplex, rx/tx-flow-control
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	*/
+	ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+	status = "okay";
+};