X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWLI-TX4-AG300N.dts;h=79e5c341d86f1d8df94a0aad317a055f33449c46;hb=a6f6f8df23a06739d062ff4cf3e996b2aea200ae;hp=4d773da4980d0c9441112fff207eadfb3f50682a;hpb=6f2b7567b898f3750c6eba5e27f2ac04682fbfbb;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
index 4d773da498..79e5c341d8 100644
--- a/target/linux/ramips/dts/WLI-TX4-AG300N.dts
+++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts
@@ -1,6 +1,8 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
 	#address-cells = <1>;
@@ -8,16 +10,9 @@
 	compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
 	model = "Buffalo WLI-TX4-AG300N";
 
-	palmbus@300000 {
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-	};
-
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -28,54 +23,47 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x10000>;
 			read-only;
 		};
+
 		factory: partition@40000 {
 			label = "factory";
 			reg = <0x40000 0x10000>;
 			read-only;
 		};
+
 		partition@50000 {
-			label = "linux";
+			label = "firmware";
 			reg = <0x50000 0x3b0000>;
 		};
 	};
 
-	ethernet@400000 {
-		status = "okay";
-		mtd-mac-address = <&factory 0x4>;
-
-                port@0 {
-			ralink,fixed-link = <1000 1 1 1>;
-		};
-	};
-
-	wmac@480000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
-			linux,code = <0x211>;
+			linux,code = <KEY_WPS_BUTTON>;
 		};
+
 		bandwidth {
 			label = "bandwidth";
 			gpios = <&gpio0 8 0>;
-			linux,code = <0x198>;
+			linux,code = <KEY_RESTART>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;
-			linux,code = <0x198>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
 
@@ -83,16 +71,44 @@
 		compatible = "gpio-leds";
 
 		diag {
-			label = "buffalo:red:diag";
+			label = "wli-tx4-ag300n:red:diag";
 			gpios = <&gpio0 10 1>;
 		};
+
 		power {
-			label = "buffalo:blue:power";
+			label = "wli-tx4-ag300n:blue:power";
 			gpios = <&gpio0 12 1>;
 		};
+
 		security {
-			label = "buffalo:blue:security";
+			label = "wli-tx4-ag300n:blue:security";
 			gpios = <&gpio0 13 1>;
 		};
 	};
 };
+
+&gpio0 {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x4>;
+
+	port@0 {
+		mediatek,fixed-link = <100 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};