X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2Fmt7621_cudy_wr1300-v2.dts;h=a33279e596d8c51e3e663747204991cc07f95487;hb=288738c59de0eeca1a0d2042882445ad54d95fe7;hp=a4a148f53b9ef0283ff9a337af9c75cc92735481;hpb=2a0805fd3d0a0f57b60778973f341cee90cb5e49;p=openwrt%2Fstaging%2Fhauke.git

diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
index a4a148f53b..a33279e596 100644
--- a/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
+++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v2.dts
@@ -1,143 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7621_cudy_wr1300-v2v3.dtsi"
 
 / {
 	compatible = "cudy,wr1300-v2", "mediatek,mt7621-soc";
 	model = "Cudy WR1300 v2";
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-		label-mac-device = &gmac0;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "green:wps";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				compatible = "nvmem-cells";
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				eeprom_factory_0: eeprom@0 {
-					reg = <0x0 0x400>;
-				};
-
-				eeprom_factory_8000: eeprom@8000 {
-					reg = <0x8000 0x4da8>;
-				};
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xf80000>;
-			};
-
-			partition@fd0000 {
-				label = "debug";
-				reg = <0xfd0000 0x10000>;
-				read-only;
-			};
-
-			partition@fe0000 {
-				label = "backup";
-				reg = <0xfe0000 0x10000>;
-				read-only;
-			};
-
-			bdinfo: partition@ff0000 {
-				compatible = "nvmem-cells";
-				label = "bdinfo";
-				reg = <0xff0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				macaddr_bdinfo_de00: macaddr@de00 {
-					reg = <0xde00 0x6>;
-				};
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
 };
 
 &pcie1 {
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
-		nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00>;
+		nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>;
 		nvmem-cell-names = "eeprom", "mac-address";
+		ieee80211-freq-limit = <2400000 2500000>;
 	};
 };
 
@@ -145,60 +21,8 @@
 	wifi@0,0 {
 		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
-		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
 		nvmem-cell-names = "eeprom", "mac-address";
-		mac-address-increment = <2>;
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&macaddr_bdinfo_de00>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac1 {
-	status = "okay";
-	label = "wan";
-	phy-handle = <&ethphy4>;
-
-	nvmem-cells = <&macaddr_bdinfo_de00>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-};
-
-&mdio {
-	ethphy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&switch0 {
-	ports {
-		port@0 {
-			status = "okay";
-			label = "lan4";
-		};
-
-		port@1 {
-			status = "okay";
-			label = "lan3";
-		};
-
-		port@2 {
-			status = "okay";
-			label = "lan2";
-		};
-
-		port@3 {
-			status = "okay";
-			label = "lan1";
-		};
-	};
-};
-
-&state_default {
-	gpio {
-		groups = "wdt", "i2c", "jtag";
-		function = "gpio";
+		ieee80211-freq-limit = <5000000 6000000>;
 	};
 };