X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2Fmt7628an.dtsi;h=b64a87a493e4b1eab151c096cb3c18f00aea7798;hb=a6f6f8df23a06739d062ff4cf3e996b2aea200ae;hp=95d192be1b9a8eef2531fb94b8a5567333a2d0a3;hpb=9b675a2a33f5c6b9c03b96a88005b1589cf88338;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi
index 95d192be1b..b64a87a493 100644
--- a/target/linux/ramips/dts/mt7628an.dtsi
+++ b/target/linux/ramips/dts/mt7628an.dtsi
@@ -13,6 +13,10 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
+	aliases {
+		serial0 = &uartlite;
+	};
+
 	cpuintc: cpuintc@0 {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -20,7 +24,7 @@
 		compatible = "mti,cpu-interrupt-controller";
 	};
 
-	palmbus@10000000 {
+	palmbus: palmbus@10000000 {
 		compatible = "palmbus";
 		reg = <0x10000000 0x200000>;
 		ranges = <0x0 0x10000000 0x1FFFFF>;
@@ -28,12 +32,12 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
+		sysc: sysc@0 {
 			compatible = "ralink,mt7620a-sysc";
 			reg = <0x0 0x100>;
 		};
 
-		watchdog@120 {
+		watchdog: watchdog@120 {
 			compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
 			reg = <0x120 0x10>;
 
@@ -62,7 +66,7 @@
 						 0x80 0x78>;
 		};
 
-		memc@300 {
+		memc: memc@300 {
 			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
 
@@ -105,8 +109,8 @@
 			};
 		};
 
-		i2c@900 {
-			compatible = "mediatek,mt7628-i2c";
+		i2c: i2c@900 {
+			compatible = "mediatek,mt7621-i2c";
 			reg = <0x900 0x100>;
 
 			resets = <&rstctrl 16>;
@@ -121,8 +125,8 @@
 			pinctrl-0 = <&i2c_pins>;
 		};
 
-		i2s@a00 {
-			compatible = "ralink,mt7620a-i2s";
+		i2s: i2s@a00 {
+			compatible = "mediatek,mt7628-i2s";
 			reg = <0xa00 0x100>;
 
 			resets = <&rstctrl 17>;
@@ -131,14 +135,17 @@
 			interrupt-parent = <&intc>;
 			interrupts = <10>;
 
-			dmas = <&gdma 2>,
-				<&gdma 3>;
+			txdma-req = <2>;
+			rxdma-req = <3>;
+
+			dmas = <&gdma 4>,
+				<&gdma 6>;
 			dma-names = "tx", "rx";
 
 			status = "disabled";
 		};
 
-		spi@b00 {
+		spi0: spi@b00 {
 			compatible = "ralink,mt7621-spi";
 			reg = <0xb00 0x100>;
 
@@ -154,7 +161,7 @@
 			status = "disabled";
 		};
 
-		uartlite@c00 {
+		uartlite: uartlite@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
@@ -162,6 +169,8 @@
 			reg-io-width = <4>;
 			no-loopback-test;
 
+			clock-frequency = <40000000>;
+
 			resets = <&rstctrl 12>;
 			reset-names = "uartl";
 
@@ -172,7 +181,7 @@
 			pinctrl-0 = <&uart0_pins>;
 		};
 
-		uart1@d00 {
+		uart1: uart1@d00 {
 			compatible = "ns16550a";
 			reg = <0xd00 0x100>;
 
@@ -180,6 +189,8 @@
 			reg-io-width = <4>;
 			no-loopback-test;
 
+			clock-frequency = <40000000>;
+
 			resets = <&rstctrl 19>;
 			reset-names = "uart1";
 
@@ -192,7 +203,7 @@
 			status = "disabled";
 		};
 
-		uart2@e00 {
+		uart2: uart2@e00 {
 			compatible = "ns16550a";
 			reg = <0xe00 0x100>;
 
@@ -200,6 +211,8 @@
 			reg-io-width = <4>;
 			no-loopback-test;
 
+			clock-frequency = <40000000>;
+
 			resets = <&rstctrl 20>;
 			reset-names = "uart2";
 
@@ -212,7 +225,7 @@
 			status = "disabled";
 		};
 
-		pwm@5000 {
+		pwm: pwm@5000 {
 			compatible = "mediatek,mt7628-pwm";
 			reg = <0x5000 0x1000>;
 
@@ -225,7 +238,7 @@
 			status = "disabled";
 		};
 
-		pcm@2000 {
+		pcm: pcm@2000 {
 			compatible = "ralink,mt7620a-pcm";
 			reg = <0x2000 0x800>;
 
@@ -239,7 +252,7 @@
 		};
 
 		gdma: gdma@2800 {
-			compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
+			compatible = "ralink,rt3883-gdma";
 			reg = <0x2800 0x800>;
 
 			resets = <&rstctrl 14>;
@@ -256,7 +269,7 @@
 		};
 	};
 
-	pinctrl {
+	pinctrl: pinctrl {
 		compatible = "ralink,rt2880-pinmux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -340,17 +353,25 @@
 		#reset-cells = <1>;
 	};
 
-	usbphy: usbphy {
-		compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
+	clkctrl: clkctrl {
+		compatible = "ralink,rt2880-clock";
+		#clock-cells = <1>;
+	};
+
+	usbphy: usbphy@10120000 {
+		compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
+		reg = <0x10120000 0x1000>;
 		#phy-cells = <1>;
 
-		resets = <&rstctrl 22>;
-		reset-names = "host";
+		resets = <&rstctrl 22 &rstctrl 25>;
+		reset-names = "host", "device";
+		clocks = <&clkctrl 22 &clkctrl 25>;
+		clock-names = "host", "device";
 	};
 
-	sdhci@10130000 {
+	sdhci: sdhci@10130000 {
 		compatible = "ralink,mt7620-sdhci";
-		reg = <0x10130000 4000>;
+		reg = <0x10130000 0x4000>;
 
 		interrupt-parent = <&intc>;
 		interrupts = <14>;
@@ -361,7 +382,7 @@
 		status = "disabled";
 	};
 
-	ehci@101c0000 {
+	ehci: ehci@101c0000 {
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x1000>;
 
@@ -372,7 +393,7 @@
 		interrupts = <18>;
 	};
 
-	ohci@101c1000 {
+	ohci: ohci@101c1000 {
 		compatible = "generic-ohci";
 		reg = <0x101c1000 0x1000>;
 
@@ -383,9 +404,9 @@
 		interrupts = <18>;
 	};
 
-	ethernet@10100000 {
+	ethernet: ethernet@10100000 {
 		compatible = "ralink,rt5350-eth";
-		reg = <0x10100000 10000>;
+		reg = <0x10100000 0x10000>;
 
 		interrupt-parent = <&cpuintc>;
 		interrupts = <5>;
@@ -397,8 +418,8 @@
 	};
 
 	esw: esw@10110000 {
-		compatible = "ralink,rt3050-esw";
-		reg = <0x10110000 8000>;
+		compatible = "mediatek,mt7628-esw", "ralink,rt3050-esw";
+		reg = <0x10110000 0x8000>;
 
 		resets = <&rstctrl 23>;
 		reset-names = "esw";
@@ -407,7 +428,7 @@
 		interrupts = <17>;
 	};
 
-	pcie@10140000 {
+	pcie: pcie@10140000 {
 		compatible = "mediatek,mt7620-pci";
 		reg = <0x10140000 0x100
 			0x10142000 0x100>;
@@ -415,12 +436,14 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		resets = <&rstctrl 26>;
-		reset-names = "pcie0";
-
 		interrupt-parent = <&cpuintc>;
 		interrupts = <4>;
 
+		resets = <&rstctrl 26 &rstctrl 27>;
+		reset-names = "pcie0", "pcie1";
+		clocks = <&clkctrl 26 &clkctrl 27>;
+		clock-names = "pcie0", "pcie1";
+
 		status = "disabled";
 
 		device_type = "pci";
@@ -440,4 +463,16 @@
 			device_type = "pci";
 		};
 	};
+
+	wmac: wmac@10300000 {
+		compatible = "mediatek,mt7628-wmac";
+		reg = <0x10300000 0x100000>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		status = "disabled";
+
+		mediatek,mtd-eeprom = <&factory 0x0000>;
+	};
 };