Refresh kernel patches.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
21 files changed:
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -61,4 +61,16 @@ static inline int mt7620_get_eco(void)
+@@ -62,4 +62,16 @@ static inline int mt7620_get_eco(void)
return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
}
return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
}
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
-@@ -557,8 +557,28 @@ static int __init bootcmdline_scan_chose
+@@ -563,8 +563,28 @@ static int __init bootcmdline_scan_chose
#endif /* CONFIG_OF_EARLY_FLATTREE */
#endif /* CONFIG_OF_EARLY_FLATTREE */
bool dt_bootargs = false;
/*
bool dt_bootargs = false;
/*
-@@ -572,6 +592,14 @@ static void __init bootcmdline_init(void
+@@ -578,6 +598,14 @@ static void __init bootcmdline_init(void
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
-@@ -699,7 +699,6 @@ static void __init arch_mem_init(char **
+@@ -705,7 +705,6 @@ static void __init arch_mem_init(char **
mips_reserve_vmcore();
mips_parse_crashkernel();
mips_reserve_vmcore();
mips_parse_crashkernel();
/*
* In order to reduce the possibility of kernel panic when failed to
/*
* In order to reduce the possibility of kernel panic when failed to
-@@ -834,6 +833,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -841,6 +840,7 @@ void __init setup_arch(char **cmdline_p)
cpu_cache_init();
paging_init();
cpu_cache_init();
paging_init();
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
+};
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
+};
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -1620,6 +1620,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
+@@ -2001,6 +2001,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_atmel,
static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_atmel,
&spi_nor_esmt,
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
&spi_nor_esmt,
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
-@@ -617,6 +617,7 @@ struct sfdp {
+@@ -631,6 +631,7 @@ struct sfdp {
/* Manufacturer drivers. */
extern const struct spi_nor_manufacturer spi_nor_atmel;
/* Manufacturer drivers. */
extern const struct spi_nor_manufacturer spi_nor_atmel;
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -352,6 +352,14 @@ config MTD_NAND_QCOM
+@@ -338,6 +338,14 @@ config MTD_NAND_QCOM
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
controller. This controller is found on IPQ806x SoC.
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
controller. This controller is found on IPQ806x SoC.
depends on MTD_NAND_ECC_MEDIATEK
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
depends on MTD_NAND_ECC_MEDIATEK
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
+@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4643,6 +4643,7 @@ static const struct net_device_ops mtk_n
+@@ -4662,6 +4662,7 @@ static const struct net_device_ops mtk_n
static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
{
static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
{
const __be32 *_id = of_get_property(np, "reg", NULL);
struct device_node *pcs_np;
phy_interface_t phy_mode;
const __be32 *_id = of_get_property(np, "reg", NULL);
struct device_node *pcs_np;
phy_interface_t phy_mode;
-@@ -4840,6 +4841,9 @@ static int mtk_add_mac(struct mtk_eth *e
- register_netdevice_notifier(&mac->device_notifier);
- }
+@@ -4875,6 +4876,9 @@ static int mtk_add_mac(struct mtk_eth *e
+ NETDEV_XDP_ACT_NDO_XMIT |
+ NETDEV_XDP_ACT_NDO_XMIT_SG;
+ if (name)
+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
+ if (name)
+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -71,13 +71,13 @@ static void phy_process_state_change(str
+@@ -72,13 +72,13 @@ static void phy_process_state_change(str
static void phy_link_up(struct phy_device *phydev)
{
static void phy_link_up(struct phy_device *phydev)
{
- phydev->phy_link_change(phydev, false);
+ phydev->phy_link_change(phydev, false, do_carrier);
phy_led_trigger_change_speed(phydev);
- phydev->phy_link_change(phydev, false);
+ phydev->phy_link_change(phydev, false, do_carrier);
phy_led_trigger_change_speed(phydev);
+ WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
-
-@@ -595,7 +595,7 @@ int phy_start_cable_test(struct phy_devi
+@@ -823,7 +823,7 @@ int phy_start_cable_test(struct phy_devi
goto out;
/* Mark the carrier down until the test is complete */
goto out;
/* Mark the carrier down until the test is complete */
netif_testing_on(dev);
err = phydev->drv->cable_test_start(phydev);
netif_testing_on(dev);
err = phydev->drv->cable_test_start(phydev);
-@@ -666,7 +666,7 @@ int phy_start_cable_test_tdr(struct phy_
+@@ -894,7 +894,7 @@ int phy_start_cable_test_tdr(struct phy_
goto out;
/* Mark the carrier down until the test is complete */
goto out;
/* Mark the carrier down until the test is complete */
netif_testing_on(dev);
err = phydev->drv->cable_test_tdr_start(phydev, config);
netif_testing_on(dev);
err = phydev->drv->cable_test_tdr_start(phydev, config);
-@@ -738,7 +738,7 @@ static int phy_check_link_status(struct
+@@ -966,7 +966,7 @@ static int phy_check_link_status(struct
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
-@@ -1224,7 +1224,7 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
+@@ -1485,7 +1485,7 @@ void phy_state_machine(struct work_struc
+ case PHY_ERROR:
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev);
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev);
break;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
break;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1037,14 +1037,16 @@ struct phy_device *phy_find_first(struct
+@@ -1069,14 +1069,16 @@ struct phy_device *phy_find_first(struct
}
EXPORT_SYMBOL(phy_find_first);
}
EXPORT_SYMBOL(phy_find_first);
phydev->mii_ts->link_state(phydev->mii_ts, phydev);
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
phydev->mii_ts->link_state(phydev->mii_ts, phydev);
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
-@@ -1687,7 +1687,8 @@ bool phylink_expects_phy(struct phylink
+@@ -1724,7 +1724,8 @@ bool phylink_expects_phy(struct phylink
}
EXPORT_SYMBOL_GPL(phylink_expects_phy);
}
EXPORT_SYMBOL_GPL(phylink_expects_phy);
bool tx_pause, rx_pause;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
bool tx_pause, rx_pause;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -739,7 +739,7 @@ struct phy_device {
+@@ -758,7 +758,7 @@ struct phy_device {
+ unsigned int link_down_events;
- void (*phy_link_change)(struct phy_device *phydev, bool up);
+ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
- void (*phy_link_change)(struct phy_device *phydev, bool up);
+ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -738,7 +738,10 @@ static int phy_check_link_status(struct
+@@ -966,7 +966,10 @@ static int phy_check_link_status(struct
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
-@@ -1224,7 +1227,10 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
+@@ -1485,7 +1488,10 @@ void phy_state_machine(struct work_struc
+ case PHY_ERROR:
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev, true);
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev, true);
break;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
break;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -647,6 +647,7 @@ struct phy_device {
+@@ -659,6 +659,7 @@ struct phy_device {
unsigned downshifted_rate:1;
unsigned is_on_sfp_module:1;
unsigned mac_managed_pm:1;
+ unsigned no_auto_carrier_off:1;
unsigned downshifted_rate:1;
unsigned is_on_sfp_module:1;
unsigned mac_managed_pm:1;
+ unsigned no_auto_carrier_off:1;
+ unsigned wol_enabled:1;
- /* The most recently read link state */
+#endif /* __ASM_MACH_RALINK_GPIO_H */
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
+#endif /* __ASM_MACH_RALINK_GPIO_H */
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -585,6 +585,12 @@ config GPIO_SNPS_CREG
+@@ -594,6 +594,12 @@ config GPIO_SNPS_CREG
where only several fields in register belong to GPIO lines and
each GPIO line owns a field with different length and on/off value.
where only several fields in register belong to GPIO lines and
each GPIO line owns a field with different length and on/off value.
depends on PLAT_SPEAR
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
depends on PLAT_SPEAR
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -122,6 +122,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
+@@ -130,6 +130,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/io.h>
-+#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+
+ rg->chip.parent = &pdev->dev;
+ rg->chip.label = dev_name(&pdev->dev);
+
+ rg->chip.parent = &pdev->dev;
+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
++ rg->chip.fwnode = of_node_to_fwnode(np);
+ rg->chip.ngpio = be32_to_cpu(*ngpio);
+ rg->chip.direction_input = ralink_gpio_direction_input;
+ rg->chip.direction_output = ralink_gpio_direction_output;
+ rg->chip.ngpio = be32_to_cpu(*ngpio);
+ rg->chip.direction_input = ralink_gpio_direction_input;
+ rg->chip.direction_output = ralink_gpio_direction_output;
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
---
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
---
- drivers/pinctrl/ralink/pinctrl-ralink.c | 21 +++++++++++++++++----
+ drivers/pinctrl/mediatek/pinctrl-mtmips.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
1 file changed, 17 insertions(+), 4 deletions(-)
---- a/drivers/pinctrl/ralink/pinctrl-ralink.c
-+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
-@@ -123,11 +123,24 @@ static int ralink_pmx_group_enable(struc
+--- a/drivers/pinctrl/mediatek/pinctrl-mtmips.c
++++ b/drivers/pinctrl/mediatek/pinctrl-mtmips.c
+@@ -123,11 +123,24 @@ static int mtmips_pmx_group_enable(struc
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2981,6 +2981,18 @@ static const struct usb_device_id uvc_id
+@@ -3120,6 +3120,18 @@ static const struct usb_device_id uvc_id
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u
- if (uvc_event_control(urb, status, len))
+@@ -228,6 +228,7 @@ static void uvc_status_complete(struct u
+ if (uvc_event_control(urb, dev->status, len))
/* The URB will be resubmitted in work context. */
return;
+ dev->motion = 1;
break;
}
/* The URB will be resubmitted in work context. */
return;
+ dev->motion = 1;
break;
}
-@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d
+@@ -273,6 +274,7 @@ int uvc_status_init(struct uvc_device *d
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
#include <media/v4l2-common.h>
#include <media/v4l2-common.h>
-@@ -1231,9 +1236,149 @@ static void uvc_video_decode_data(struct
+@@ -1235,9 +1240,149 @@ static void uvc_video_decode_data(struct
uvc_urb->async_operations++;
}
uvc_urb->async_operations++;
}
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_dbg(stream->dev, FRAME, "Frame complete (EOF found)\n");
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_dbg(stream->dev, FRAME, "Frame complete (EOF found)\n");
-@@ -1815,6 +1960,8 @@ static int uvc_init_video_isoc(struct uv
+@@ -1819,6 +1964,8 @@ static int uvc_init_video_isoc(struct uv
if (npackets == 0)
return -ENOMEM;
if (npackets == 0)
return -ENOMEM;
for_each_uvc_urb(uvc_urb, stream) {
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
for_each_uvc_urb(uvc_urb, stream) {
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
#define UVC_QUIRK_FORCE_Y8 0x00000800
#define UVC_QUIRK_FORCE_BPP 0x00001000
#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
#define UVC_QUIRK_FORCE_Y8 0x00000800
#define UVC_QUIRK_FORCE_BPP 0x00001000
#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
-@@ -562,6 +564,7 @@ struct uvc_device {
- u8 *status;
+@@ -582,6 +584,7 @@ struct uvc_device {
+
struct input_dev *input;
char input_phys[64];
+ int motion;
struct input_dev *input;
char input_phys[64];
+ int motion;
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -823,6 +823,12 @@ config SPI_QCOM_GENI
+@@ -895,6 +895,12 @@ config SPI_QCOM_GENI
This driver can also be built as a module. If so, the module
will be called spi-geni-qcom.
This driver can also be built as a module. If so, the module
will be called spi-geni-qcom.
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
+ config SPI_S3C64XX
+ tristate "Samsung S3C64XX/Exynos SoC series type SPI"
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -110,6 +110,7 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+@@ -117,6 +117,7 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
+ obj-$(CONFIG_SPI_RZV2M_CSI) += spi-rzv2m-csi.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
+ obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,535 @@
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,535 @@
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -998,6 +998,11 @@ config I2C_RK3X
+@@ -1021,6 +1021,11 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
depends on ARCH_RENESAS || COMPILE_TEST
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
depends on ARCH_RENESAS || COMPILE_TEST
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc
+@@ -96,6 +96,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -1102,6 +1102,8 @@ config MMC_OWL
+@@ -1059,6 +1059,8 @@ config MMC_OWL
config MMC_SDHCI_EXTERNAL_DMA
bool
config MMC_SDHCI_EXTERNAL_DMA
bool
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
-@@ -86,6 +86,7 @@ source "sound/soc/mxs/Kconfig"
+@@ -99,6 +99,7 @@ source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/qcom/Kconfig"
source "sound/soc/rockchip/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/qcom/Kconfig"
source "sound/soc/rockchip/Kconfig"
source "sound/soc/sof/Kconfig"
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
source "sound/soc/sof/Kconfig"
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
+@@ -56,6 +56,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += qcom/
obj-$(CONFIG_SND_SOC) += rockchip/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += qcom/
obj-$(CONFIG_SND_SOC) += rockchip/
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
-@@ -445,6 +445,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -467,6 +467,9 @@ uart_get_baud_rate(struct uart_port *por
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
-@@ -393,6 +393,15 @@ config PWM_MEDIATEK
+@@ -415,6 +415,15 @@ config PWM_MICROCHIP_CORE
To compile this driver as a module, choose M here: the module
To compile this driver as a module, choose M here: the module
- will be called pwm-mediatek.
+ will be called pwm-microchip-core.
+config PWM_MEDIATEK_RAMIPS
+ tristate "Mediatek PWM support"
+config PWM_MEDIATEK_RAMIPS
+ tristate "Mediatek PWM support"
depends on ARCH_MXS || COMPILE_TEST
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
depends on ARCH_MXS || COMPILE_TEST
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
+@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MESON) += pwm-meson.o
obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MESON) += pwm-meson.o
obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
+ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
- obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek-ramips.c
@@ -0,0 +1,197 @@
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek-ramips.c
@@ -0,0 +1,197 @@
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
-@@ -462,6 +462,12 @@ static int dwc2_driver_probe(struct plat
+@@ -493,6 +493,12 @@ static int dwc2_driver_probe(struct plat
if (retval)
return retval;
if (retval)
return retval;
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_ECHO) += echo/
+@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
+#endif
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
+#endif
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
-@@ -824,4 +824,6 @@ config CRYPTO_DEV_SA2UL
- source "drivers/crypto/keembay/Kconfig"
+@@ -797,4 +797,6 @@ config CRYPTO_DEV_SA2UL
source "drivers/crypto/aspeed/Kconfig"
source "drivers/crypto/aspeed/Kconfig"
+ source "drivers/crypto/starfive/Kconfig"
+source "drivers/crypto/mtk-eip93/Kconfig"
+
endif # CRYPTO_HW
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
+source "drivers/crypto/mtk-eip93/Kconfig"
+
endif # CRYPTO_HW
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
-@@ -53,3 +53,4 @@ obj-y += xilinx/
- obj-y += hisilicon/
+@@ -51,3 +51,4 @@ obj-y += hisilicon/
obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
+ obj-y += intel/
+ obj-y += starfive/
+obj-$(CONFIG_CRYPTO_DEV_EIP93) += mtk-eip93/
+obj-$(CONFIG_CRYPTO_DEV_EIP93) += mtk-eip93/