add preliminary support for the XScale port, generic endianness indication

SVN-Revision: 3648

diff --git a/openwrt/Config.in b/openwrt/Config.in
index 99f9c9c34eda065e38fabdd0210eb572758c335f..bdc8703e684adfe37f71900499f4a96163887935 100644 (file)
--- a/openwrt/Config.in
+++ b/openwrt/Config.in
@@ -10,6 +10,9 @@ config BR2_HAVE_DOT_CONFIG
        bool
        default y
 
        bool
        default y
 

+config BR2_BIG_ENDIAN
+       tristate
+

 # Supported architectures
 
 config BR2_i386
 # Supported architectures
 
 config BR2_i386


@@ -17,10 +20,15 @@ config BR2_i386
        
 config BR2_mips
        tristate
        
 config BR2_mips
        tristate

+       select BR2_BIG_ENDIAN

 
 config BR2_mipsel
        tristate
 
 
 config BR2_mipsel
        tristate
 

+config BR2_armeb
+       tristate
+       select BR2_BIG_ENDIAN
+

 # Unsupported architectures
 
 if CONFIG_DEVEL
 # Unsupported architectures
 
 if CONFIG_DEVEL


@@ -28,32 +36,34 @@ if CONFIG_DEVEL
 config BR2_arm
        tristate
 
 config BR2_arm
        tristate
 

-config BR2_armeb
-       tristate
-

 config BR2_cris
        tristate
 
 config BR2_m68k
        tristate
 config BR2_cris
        tristate
 
 config BR2_m68k
        tristate

+       select BR2_BIG_ENDIAN

 
 config BR2_powerpc
        tristate
 
 config BR2_powerpc
        tristate

+       select BR2_BIG_ENDIAN

 
 config BR2_sh3
        tristate
 
 config BR2_sh3eb
        tristate
 
 config BR2_sh3
        tristate
 
 config BR2_sh3eb
        tristate

+       select BR2_BIG_ENDIAN

 
 config BR2_sh4
        tristate
 
 config BR2_sh4eb
        tristate
 
 config BR2_sh4
        tristate
 
 config BR2_sh4eb
        tristate

+       select BR2_BIG_ENDIAN

 
 config BR2_sparc
        tristate
 
 config BR2_sparc
        tristate

+       select BR2_BIG_ENDIAN

 
 endif
 
 
 endif
 

diff --git a/openwrt/target/Config.in b/openwrt/target/Config.in
index 2c486eec766867e4c7118b0e8af1cb698f64c330..fa3843b99039a2c23e40898b651bdb3cbab415a2 100644 (file)
--- a/openwrt/target/Config.in
+++ b/openwrt/target/Config.in
@@ -2,6 +2,15 @@ choice
        prompt "Target System"
        default BR2_LINUX_2_4_BRCM
        
        prompt "Target System"
        default BR2_LINUX_2_4_BRCM
        

+config BR2_LINUX_2_6_AU1000
+       bool "AMD Alchemy 1xxx [2.6]"
+       select BR2_mipsel
+       select BR2_LINUX_2_6
+       select BR2_LINUX_PCMCIA_SUPPORT
+       help
+         Build firmware for AMD Alchemy 1500 boards
+         (e.g. 4G-Systems Mesh/Access Cube ...)
+

 config BR2_LINUX_2_6_ARUBA
        bool "Aruba [2.6]"
        select BR2_mips
 config BR2_LINUX_2_6_ARUBA
        bool "Aruba [2.6]"
        select BR2_mips


@@ -37,6 +46,14 @@ config BR2_LINUX_2_6_BRCM
          Build firmware images for Broadcom based routers
          (e.g. Netgear WGT634u)
 
          Build firmware images for Broadcom based routers
          (e.g. Netgear WGT634u)
 

+config BR2_LINUX_2_6_XSCALE
+       bool "Intel XScale IXP42x [2.6]"
+       select BR2_armeb
+       select BR2_LINUX_2_6
+       help
+         Build firmware image for Intel Xscale based routers
+         (e.g. Gateway 7001 series)
+

 config BR2_LINUX_2_4_AR7
        bool "TI AR7 [2.4]"
        select BR2_mipsel
 config BR2_LINUX_2_4_AR7
        bool "TI AR7 [2.4]"
        select BR2_mipsel


@@ -60,25 +77,12 @@ config BR2_LINUX_2_6_X86
          Build firmware images for x86 based boards
          (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
 
          Build firmware images for x86 based boards
          (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
 

-config BR2_LINUX_2_6_AU1000
-       bool "au1000 [2.6]"
-       select BR2_mipsel
-       select BR2_LINUX_2_6
-       select BR2_LINUX_PCMCIA_SUPPORT
-       help
-         Build firmware for AMD Alchemy 1500 boards
-         (e.g. 4G-Systems Mesh/Access Cube ...)
-

 if CONFIG_DEVEL
 
 config BR2_LINUX_2_6_ARM
        bool "UNSUPPORTED little-endian arm platform"
        select BR2_arm
 
 if CONFIG_DEVEL
 
 config BR2_LINUX_2_6_ARM
        bool "UNSUPPORTED little-endian arm platform"
        select BR2_arm
 

-config BR2_LINUX_2_6_ARMEB
-       bool "UNSUPPORTED big-endian arm platform"
-       select BR2_armeb
-

 config BR2_LINUX_2_6_CRIS
        bool "UNSUPPORTED cris platform"
        select BR2_cris
 config BR2_LINUX_2_6_CRIS
        bool "UNSUPPORTED cris platform"
        select BR2_cris

diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in
index 65d9a3e0b04d22883e4672156400e90614e74190..c6427115fc13b1ade607b1b1c4f1e6f211ca4cb8 100644 (file)
--- a/openwrt/target/linux/Config.in
+++ b/openwrt/target/linux/Config.in
@@ -10,6 +10,7 @@ menu "Target Root Filesystem"
                bool "squashfs-lzma"
                default y
                depends !BR2_LINUX_2_6_ARUBA
                bool "squashfs-lzma"
                default y
                depends !BR2_LINUX_2_6_ARUBA

+               depends !BR2_LINUX_2_6_XSCALE

                help
                  Build a squashfs-lzma root filesystem
 
                help
                  Build a squashfs-lzma root filesystem
 

diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile
index 9f25fd721e73d847fd59443fb6eec841cc3a9448..cb64753195faa16e206e68a5f1d4bb8acb2590a9 100644 (file)
--- a/openwrt/target/linux/Makefile
+++ b/openwrt/target/linux/Makefile
@@ -93,3 +93,4 @@ $(eval $(call kernel_template,2.6,x86,2_6_X86))
 $(eval $(call kernel_template,2.4,ar531x,2_4_AR531X))
 $(eval $(call kernel_template,2.6,aruba,2_6_ARUBA))
 $(eval $(call kernel_template,2.6,au1000,2_6_AU1000))
 $(eval $(call kernel_template,2.4,ar531x,2_4_AR531X))
 $(eval $(call kernel_template,2.6,aruba,2_6_ARUBA))
 $(eval $(call kernel_template,2.6,au1000,2_6_AU1000))

+$(eval $(call kernel_template,2.6,xscale,2_6_XSCALE))

diff --git a/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch b/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch
index 91da40ac37dda5632e83b17511cf2e53db9338cb..21d09b6f070b25911e53414b952d5965d51f3dec 100644 (file)
--- a/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch
+++ b/openwrt/target/linux/generic-2.6/patches/005-gcc4_fix.patch
@@ -183,3 +183,15 @@ diff -Nur linux-2.6.15.1/lib/Makefile linux-2.6.15.1-openwrt/lib/Makefile
  
  obj-y += sort.o parser.o halfmd4.o
  
  
  obj-y += sort.o parser.o halfmd4.o
  

+diff -Nur linux-2.6.15.1/include/asm-arm/libgcc.h linux-2.6.15.1-openwrt/include/asm-arm/libgcc.h
+--- linux-2.6.15.1/include/asm-arm/libgcc.h    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.15.1-openwrt/include/asm-arm/libgcc.h    2006-04-12 23:01:18.000000000 +0200
+@@ -0,0 +1,8 @@
++#ifndef __ASM_LIBGCC_H
++#define __ASM_LIBGCC_H
++
++#undef ARCH_NEEDS_ashldi3
++#undef ARCH_NEEDS_ashrdi3
++#undef ARCH_NEEDS_lshrdi3
++
++#endif /* __ASM_LIBGCC_H */

diff --git a/openwrt/target/linux/image/jffs2.mk b/openwrt/target/linux/image/jffs2.mk
index c7d4335d8c04149373af680249ab6f6be7321d6b..281db0192231db02c42b64b65a17abaad9d2e52c 100644 (file)
--- a/openwrt/target/linux/image/jffs2.mk
+++ b/openwrt/target/linux/image/jffs2.mk
@@ -1,4 +1,4 @@
-ifneq ($(BR2_mips),y)
+ifneq ($(BR2_BIG_ENDIAN),y)

 JFFS2OPTS :=  --pad --little-endian --squash
 else
 JFFS2OPTS :=  --pad --big-endian --squash
 JFFS2OPTS :=  --pad --little-endian --squash
 else
 JFFS2OPTS :=  --pad --big-endian --squash

diff --git a/openwrt/target/linux/image/squashfs.mk b/openwrt/target/linux/image/squashfs.mk
index 0b39aa1611cc66da2e6967815433387bf8780ee2..9d344ba5ff369703ba9b49a886a8fb6de1a31606 100644 (file)
--- a/openwrt/target/linux/image/squashfs.mk
+++ b/openwrt/target/linux/image/squashfs.mk
@@ -1,7 +1,7 @@
+ifneq ($(BR2_BIG_ENDIAN),y)

 endian := le
 endian := le

-
-ifeq ($(ARCH),mips)
-       endian := be
+else
+endian := be

 endif
 
 squashfs-prepare:
 endif
 
 squashfs-prepare:

diff --git a/openwrt/target/linux/image/xscale/Makefile b/openwrt/target/linux/image/xscale/Makefile
new file mode 100644 (file)
index 0000000..04a89f9
--- /dev/null
+++ b/openwrt/target/linux/image/xscale/Makefile
@@ -0,0 +1,36 @@
+include $(TOPDIR)/rules.mk
+
+KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
+
+
+ifeq ($(FS),jffs2-8MB)
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img: $(KDIR)/root.$(FS)
+       $(CP) $^ $@
+
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
+
+endif
+
+
+ifeq ($(FS),tgz)
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
+       $(CP) $^ $@
+
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
+
+endif
+
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/vmlinux
+       $(CP) $^ $@
+
+
+clean:
+prepare:
+compile:
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz
+install-ib:
+       mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
+       $(CP) $(KDIR)/bzImage $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/

diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network
new file mode 100644 (file)
index 0000000..f60332c
--- /dev/null
+++ b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/config/network
@@ -0,0 +1,5 @@
+# Network configuration file
+
+## LAN configuration
+lan_ifname="eth0"
+lan_proto="dhcp"

diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale
new file mode 100755 (executable)
index 0000000..9836de4
--- /dev/null
+++ b/openwrt/target/linux/package/base-files/files/xscale-2.6/etc/init.d/S00xscale
@@ -0,0 +1,4 @@
+#!/bin/sh
+mount none /proc -t proc
+mount_root failsafe
+mount -o remount,rw /dev/root /

diff --git a/openwrt/target/linux/package/base-files/files/xscale-2.6/init b/openwrt/target/linux/package/base-files/files/xscale-2.6/init
new file mode 100755 (executable)
index 0000000..8ca48a0
--- /dev/null
+++ b/openwrt/target/linux/package/base-files/files/xscale-2.6/init
@@ -0,0 +1,3 @@
+#!/bin/ash
+mount none /dev -t devfs
+exec /bin/busybox init

diff --git a/openwrt/target/linux/rules.mk b/openwrt/target/linux/rules.mk
index f0f2e72dbbae89e6ffcbb211ed28f3d233a7da5f..3358f1fd930acee1911ea9702d5cf5d52ce48345 100644 (file)
--- a/openwrt/target/linux/rules.mk
+++ b/openwrt/target/linux/rules.mk
@@ -20,6 +20,7 @@ LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
        -e 's/mipseb/mips/' \
        -e 's/powerpc/ppc/' \
        -e 's/sh[234]/sh/' \
        -e 's/mipseb/mips/' \
        -e 's/powerpc/ppc/' \
        -e 's/sh[234]/sh/' \

+       -e 's/armeb/arm/' \

 )
 
 KPKG_MAKEOPTS:=        IPKG="$(IPKG_KERNEL)" \
 )
 
 KPKG_MAKEOPTS:=        IPKG="$(IPKG_KERNEL)" \

diff --git a/openwrt/target/linux/xscale-2.6/Makefile b/openwrt/target/linux/xscale-2.6/Makefile
new file mode 100644 (file)
index 0000000..8b1455e
--- /dev/null
+++ b/openwrt/target/linux/xscale-2.6/Makefile
@@ -0,0 +1,18 @@
+include $(TOPDIR)/rules.mk
+
+LINUX_VERSION:=2.6.16.4
+LINUX_RELEASE:=1
+LINUX_KERNEL_MD5SUM:=cb675279c9711237a06ebb8379a4da27
+
+include ../rules.mk
+include ./config
+
+include ../generic-$(KERNEL)/modules.mk
+include ../kernel.mk
+
+
+$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
+       [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
+       [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
+       @$(CP) config $(LINUX_DIR)/.config
+       touch $@

diff --git a/openwrt/target/linux/xscale-2.6/config b/openwrt/target/linux/xscale-2.6/config
new file mode 100644 (file)
index 0000000..8bafe11
--- /dev/null
+++ b/openwrt/target/linux/xscale-2.6/config
@@ -0,0 +1,1367 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16.4
+# Fri Apr 14 11:36:42 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_SHMEM is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_SLAB is not set
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_SLOB=y
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+# CONFIG_MACH_NSLU2 is not set
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+CONFIG_MACH_GATEWAY7001=y
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_NAS100D is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+# CONFIG_IXP4XX_INDIRECT_PCI is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+CONFIG_TCP_CONG_VEGAS=y
+# CONFIG_TCP_CONG_SCALABLE is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_IRC=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_POLICY is not set
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_IMQ=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_SET is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_POLICY is not set
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_ESFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_SYNCLINK_SYNCPPP is not set
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=y
+# CONFIG_HDLC_RAW_ETH is not set
+CONFIG_HDLC_CISCO=y
+CONFIG_HDLC_FR=y
+CONFIG_HDLC_PPP=y
+
+#
+# X.25/LAPB support is disabled
+#
+# CONFIG_PCI200SYN is not set
+# CONFIG_WANXL is not set
+# CONFIG_PC300 is not set
+# CONFIG_FARSYNC is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_COUNT=24
+CONFIG_DLCI_MAX=8
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

diff --git a/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch b/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch
new file mode 100644 (file)
index 0000000..b8219f8
--- /dev/null
+++ b/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch
@@ -0,0 +1,313 @@
+diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig        2006-04-11 19:19:28.000000000 +0200
++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig   2006-04-12 16:47:34.000000000 +0200
+@@ -30,6 +30,13 @@
+         Engineering Coyote Gateway Reference Platform. For more
+         information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
++config MACH_GATEWAY7001
++      bool "Gateway 7001"
++      help
++        Say 'Y' here if you want your kernel to support Gateway's 
++        7001 Access Point. For more information on this platform,
++        see http://openwrt.org
++
+ config ARCH_IXDP425
+       bool "IXDP425"
+       help
+diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile       2006-04-11 19:19:28.000000000 +0200
++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile  2006-04-12 22:34:09.000000000 +0200
+@@ -10,4 +10,5 @@
+ obj-$(CONFIG_MACH_GTWX5715)   += gtwx5715-pci.o gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2)      += nslu2-pci.o nslu2-setup.o nslu2-power.o
+ obj-$(CONFIG_MACH_NAS100D)    += nas100d-pci.o nas100d-setup.o nas100d-power.o
++obj-$(CONFIG_MACH_GATEWAY7001)        += gateway7001-pci.o gateway7001-setup.o
+ 
+diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
+--- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c      1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-04-12 22:35:29.000000000 +0200
+@@ -0,0 +1,77 @@
++/*
++ * arch/arm/mach-ixp4xx/gateway7001-pci.c 
++ *
++ * Gateway 7001 board-level PCI initialization
++ *
++ * Copyright (c) 2006 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on ixdp425-pci.c:
++ *    Copyright (C) 2002 Intel Corporation.
++ *    Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/config.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/mach/pci.h>
++#include <asm/irq.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++
++void __init gateway7001_pci_preinit(void)
++{
++      set_irq_type(IRQ_GATEWAY7001_PCI_INTA, IRQT_LOW);
++      set_irq_type(IRQ_GATEWAY7001_PCI_INTB, IRQT_LOW);
++      set_irq_type(IRQ_GATEWAY7001_PCI_INTC, IRQT_LOW);
++      set_irq_type(IRQ_GATEWAY7001_PCI_INTD, IRQT_LOW);
++
++      ixp4xx_pci_preinit();
++}
++
++static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++      static int pci_irq_table[GATEWAY7001_PCI_IRQ_LINES] = {
++              IRQ_GATEWAY7001_PCI_INTA,
++              IRQ_GATEWAY7001_PCI_INTB,
++              IRQ_GATEWAY7001_PCI_INTC,
++              IRQ_GATEWAY7001_PCI_INTD
++      };
++
++      int irq = -1;
++
++      if (slot >= 1 && slot <= GATEWAY7001_PCI_MAX_DEV && 
++              pin >= 1 && pin <= GATEWAY7001_PCI_IRQ_LINES) {
++              irq = pci_irq_table[(slot + pin - 2) % 4];
++      }
++
++      return irq;
++}
++
++struct hw_pci gateway7001_pci __initdata = {
++      .nr_controllers = 1,
++      .preinit        = gateway7001_pci_preinit,
++      .swizzle        = pci_std_swizzle,
++      .setup          = ixp4xx_setup,
++      .scan           = ixp4xx_scan_bus,
++      .map_irq        = gateway7001_map_irq,
++};
++
++int __init gateway7001_pci_init(void)
++{
++      if (machine_is_gateway7001())
++              pci_common_init(&gateway7001_pci);
++      return 0;
++}
++
++subsys_initcall(gateway7001_pci_init);
++
+diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-setup.c    1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c       2006-04-12 22:45:53.000000000 +0200
+@@ -0,0 +1,136 @@
++/*
++ * arch/arm/mach-ixp4xx/gateway7001-setup.c
++ *
++ * Gateway 7001 board-setup 
++ *
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based-on ixdp425-setup.c:
++ *    Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data gateway7001_flash_data = {
++      .map_name       = "cfi_probe",
++      .width          = 2,
++};
++
++static struct resource gateway7001_flash_resource = {
++      .flags          = IORESOURCE_MEM,
++};
++
++static struct platform_device gateway7001_flash = {
++      .name           = "IXP4XX-Flash",
++      .id             = 0,
++      .dev            = {
++              .platform_data = &gateway7001_flash_data,
++      },
++      .num_resources  = 1,
++      .resource       = &gateway7001_flash_resource,
++};
++
++static struct ixp4xx_i2c_pins gateway7001_i2c_gpio_pins = {
++      .sda_pin        = GATEWAY7001_SDA_PIN,
++      .scl_pin        = GATEWAY7001_SCL_PIN,
++};
++
++static struct platform_device gateway7001_i2c_controller = {
++      .name           = "IXP4XX-I2C",
++      .id             = 0,
++      .dev            = {
++              .platform_data = &gateway7001_i2c_gpio_pins,
++      },
++      .num_resources  = 0
++};
++
++static struct resource gateway7001_uart_resources[] = {
++      {
++              .start          = IXP4XX_UART1_BASE_PHYS,
++              .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++              .flags          = IORESOURCE_MEM
++      },
++      {
++              .start          = IXP4XX_UART2_BASE_PHYS,
++              .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++              .flags          = IORESOURCE_MEM
++      }
++};
++
++static struct plat_serial8250_port gateway7001_uart_data[] = {
++      {
++              .mapbase        = IXP4XX_UART1_BASE_PHYS,
++              .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++              .irq            = IRQ_IXP4XX_UART1,
++              .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++              .iotype         = UPIO_MEM,
++              .regshift       = 2,
++              .uartclk        = IXP4XX_UART_XTAL,
++      },
++      {
++              .mapbase        = IXP4XX_UART2_BASE_PHYS,
++              .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++              .irq            = IRQ_IXP4XX_UART2,
++              .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++              .iotype         = UPIO_MEM,
++              .regshift       = 2,
++              .uartclk        = IXP4XX_UART_XTAL,
++      },
++      { },
++};
++
++static struct platform_device gateway7001_uart = {
++      .name                   = "serial8250",
++      .id                     = PLAT8250_DEV_PLATFORM,
++      .dev.platform_data      = gateway7001_uart_data,
++      .num_resources          = 2,
++      .resource               = gateway7001_uart_resources
++};
++
++static struct platform_device *gateway7001_devices[] __initdata = {
++      &gateway7001_i2c_controller,
++      &gateway7001_flash,
++      &gateway7001_uart
++};
++
++static void __init gateway7001_init(void)
++{
++      ixp4xx_sys_init();
++
++      gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++      gateway7001_flash_resource.end =
++              IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++      platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
++}
++
++#ifdef CONFIG_MACH_GATEWAY7001
++MACHINE_START(GATEWAY7001, "Gateway 7001")
++      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
++      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++      .map_io         = ixp4xx_map_io,
++      .init_irq       = ixp4xx_init_irq,
++      .timer          = &ixp4xx_timer,
++      .boot_params    = 0x0100,
++      .init_machine   = gateway7001_init,
++MACHINE_END
++#endif
++
+diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/gateway7001.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/gateway7001.h
+--- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/gateway7001.h   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/gateway7001.h      2006-04-12 22:34:43.000000000 +0200
+@@ -0,0 +1,36 @@
++/*
++ * include/asm-arm/arch-ixp4xx/gateway7001.h
++ *
++ * Gateway 7001 platform specific definitions
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Copyright 2006 (c) Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on ixdp425.h:
++ *    Copyright 2004 (c) MontaVista, Software, Inc. 
++ * 
++ * This file is licensed under  the terms of the GNU General Public 
++ * License version 2. This program is licensed "as is" without any 
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define       GATEWAY7001_SDA_PIN             7
++#define       GATEWAY7001_SCL_PIN             6
++
++/*
++ * GATEWAY7001 PCI IRQs
++ */
++#define GATEWAY7001_PCI_MAX_DEV       4
++#define GATEWAY7001_PCI_IRQ_LINES     4
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define GATEWAY7001_PCI_INTA_PIN      11
++#define GATEWAY7001_PCI_INTB_PIN      10
++#define       GATEWAY7001_PCI_INTC_PIN        9
++#define       GATEWAY7001_PCI_INTD_PIN        8
+diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/hardware.h
+--- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/hardware.h      2006-04-11 19:19:28.000000000 +0200
++++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/hardware.h 2006-04-12 22:34:52.000000000 +0200
+@@ -46,5 +46,6 @@
+ #include "prpmc1100.h"
+ #include "nslu2.h"
+ #include "nas100d.h"
++#include "gateway7001.h"
+ 
+ #endif  /* _ASM_ARCH_HARDWARE_H */
+diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/irqs.h
+--- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/irqs.h  2006-04-11 19:19:28.000000000 +0200
++++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/irqs.h     2006-04-12 22:35:05.000000000 +0200
+@@ -109,4 +109,12 @@
+ #define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+ #define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+ 
++/*
++ * GATEWAY7001 board IRQs
++ */
++#define        IRQ_GATEWAY7001_PCI_INTA      IRQ_IXP4XX_GPIO11
++#define        IRQ_GATEWAY7001_PCI_INTB      IRQ_IXP4XX_GPIO10
++#define        IRQ_GATEWAY7001_PCI_INTC      IRQ_IXP4XX_GPIO9
++#define        IRQ_GATEWAY7001_PCI_INTD      IRQ_IXP4XX_GPIO8
++
+ #endif

diff --git a/openwrt/toolchain/Config.in b/openwrt/toolchain/Config.in
index 080d87761fdfb14096553e7b73f00411d2b73aaf..a6fb858353d1f3aa6059d450a40afd86424a94e5 100644 (file)
--- a/openwrt/toolchain/Config.in
+++ b/openwrt/toolchain/Config.in
@@ -26,4 +26,5 @@ config BR2_TARGET_OPTIMIZATION
        string
        default "-Os -pipe -march=i486 -funit-at-a-time" if BR2_i386
        default "-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time" if BR2_mipsel || BR2_mips
        string
        default "-Os -pipe -march=i486 -funit-at-a-time" if BR2_i386
        default "-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time" if BR2_mipsel || BR2_mips

+       default "-Os -pipe -mcpu=xscale -funit-at-a-time" if BR2_armeb

        default "-Os -pipe -funit-at-a-time"
        default "-Os -pipe -funit-at-a-time"

diff --git a/openwrt/toolchain/gcc/4.0.3/800-arm-bigendian.patch b/openwrt/toolchain/gcc/4.0.3/800-arm-bigendian.patch
new file mode 100644 (file)
index 0000000..307aea3
--- /dev/null
+++ b/openwrt/toolchain/gcc/4.0.3/800-arm-bigendian.patch
@@ -0,0 +1,67 @@
+By Lennert Buytenhek <buytenh@wantstofly.org>
+Adds support for arm*b-linux* big-endian ARM targets
+
+See http://gcc.gnu.org/PR16350
+
+--- gcc-4.0.3/gcc/config/arm/linux-elf.h
++++ gcc-4.0.3/gcc/config/arm/linux-elf.h
+@@ -31,19 +31,33 @@
+ /* Do not assume anything about header files.  */
+ #define NO_IMPLICIT_EXTERN_C
+ 
++/*
++ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-*
++ * (big endian) configurations.
++ */
++#if TARGET_BIG_ENDIAN_DEFAULT
++#define TARGET_ENDIAN_DEFAULT ARM_FLAG_BIG_END
++#define TARGET_ENDIAN_OPTION "mbig-endian"
++#define TARGET_LINKER_EMULATION "armelfb_linux"
++#else
++#define TARGET_ENDIAN_DEFAULT 0
++#define TARGET_ENDIAN_OPTION "mlittle-endian"
++#define TARGET_LINKER_EMULATION "armelf_linux"
++#endif
++
+ #undef  TARGET_DEFAULT_FLOAT_ABI
+ #define TARGET_DEFAULT_FLOAT_ABI ARM_FLOAT_ABI_HARD
+ 
+ #undef  TARGET_DEFAULT
+-#define TARGET_DEFAULT (0)
++#define TARGET_DEFAULT (TARGET_ENDIAN_DEFAULT)
+ 
+ #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6
+ 
+-#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux -p"
++#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION " -p"
+ 
+ #undef  MULTILIB_DEFAULTS
+ #define MULTILIB_DEFAULTS \
+-      { "marm", "mlittle-endian", "mhard-float", "mno-thumb-interwork" }
++      { "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mno-thumb-interwork" }
+ 
+ /* The GNU C++ standard library requires that these macros be defined.  */
+ #undef CPLUSPLUS_CPP_SPEC
+@@ -90,7 +104,7 @@
+    %{rdynamic:-export-dynamic} \
+    %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2} \
+    -X \
+-   %{mbig-endian:-EB}" \
++   %{mbig-endian:-EB} %{mlittle-endian:-EL}" \
+    SUBTARGET_EXTRA_LINK_SPEC
+ 
+ #define TARGET_OS_CPP_BUILTINS()              \
+--- gcc-4.0.3/gcc/config.gcc
++++ gcc-4.0.3/gcc/config.gcc
+@@ -672,6 +672,11 @@
+       ;;
+ arm*-*-linux*)                        # ARM GNU/Linux with ELF
+       tm_file="dbxelf.h elfos.h linux.h arm/elf.h  arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
++      case $target in
++      arm*b-*)
++              tm_defines="TARGET_BIG_ENDIAN_DEFAULT=1 $tm_defines"
++              ;;
++      esac
+       tmake_file="${tmake_file} arm/t-arm arm/t-linux"
+       extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+       gnu_ld=yes

diff --git a/openwrt/toolchain/gcc/4.1.0/800-arm-bigendian.patch b/openwrt/toolchain/gcc/4.1.0/800-arm-bigendian.patch
new file mode 100644 (file)
index 0000000..1fa5ae1
--- /dev/null
+++ b/openwrt/toolchain/gcc/4.1.0/800-arm-bigendian.patch
@@ -0,0 +1,67 @@
+By Lennert Buytenhek <buytenh@wantstofly.org>
+Adds support for arm*b-linux* big-endian ARM targets
+
+See http://gcc.gnu.org/PR16350
+
+--- gcc-4.1.0/gcc/config/arm/linux-elf.h
++++ gcc-4.1.0/gcc/config/arm/linux-elf.h
+@@ -28,19 +28,33 @@
+ #undef  TARGET_VERSION
+ #define TARGET_VERSION  fputs (" (ARM GNU/Linux with ELF)", stderr);
+ 
++/*
++ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-*
++ * (big endian) configurations.
++ */
++#if TARGET_BIG_ENDIAN_DEFAULT
++#define TARGET_ENDIAN_DEFAULT MASK_BIG_END
++#define TARGET_ENDIAN_OPTION "mbig-endian"
++#define TARGET_LINKER_EMULATION "armelfb_linux"
++#else
++#define TARGET_ENDIAN_DEFAULT 0
++#define TARGET_ENDIAN_OPTION "mlittle-endian"
++#define TARGET_LINKER_EMULATION "armelf_linux"
++#endif
++
+ #undef  TARGET_DEFAULT_FLOAT_ABI
+ #define TARGET_DEFAULT_FLOAT_ABI ARM_FLOAT_ABI_HARD
+ 
+ #undef  TARGET_DEFAULT
+-#define TARGET_DEFAULT (0)
++#define TARGET_DEFAULT (TARGET_ENDIAN_DEFAULT)
+ 
+ #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6
+ 
+-#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux -p"
++#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION " -p"
+ 
+ #undef  MULTILIB_DEFAULTS
+ #define MULTILIB_DEFAULTS \
+-      { "marm", "mlittle-endian", "mhard-float", "mno-thumb-interwork" }
++      { "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mno-thumb-interwork" }
+ 
+ /* Now we define the strings used to build the spec file.  */
+ #undef  LIB_SPEC
+@@ -61,7 +75,7 @@
+    %{rdynamic:-export-dynamic} \
+    %{!dynamic-linker:-dynamic-linker " LINUX_TARGET_INTERPRETER "} \
+    -X \
+-   %{mbig-endian:-EB}" \
++   %{mbig-endian:-EB} %{mlittle-endian:-EL}" \
+    SUBTARGET_EXTRA_LINK_SPEC
+ 
+ #undef  LINK_SPEC
+--- gcc-4.1.0/gcc/config.gcc
++++ gcc-4.1.0/gcc/config.gcc
+@@ -672,6 +672,11 @@
+       ;;
+ arm*-*-linux*)                        # ARM GNU/Linux with ELF
+       tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" 
++      case $target in
++      arm*b-*)
++              tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
++              ;;
++      esac
+       tmake_file="${tmake_file} t-linux arm/t-arm"
+       case ${target} in
+       arm*-*-linux-gnueabi)

diff --git a/openwrt/toolchain/gcc/Config.in b/openwrt/toolchain/gcc/Config.in
index 5d525bd8bc78d8b9ede6fcf257dca6ccb7284009..356e9ebdf0b89cb1282eb815778902da93b390a6 100644 (file)
--- a/openwrt/toolchain/gcc/Config.in
+++ b/openwrt/toolchain/gcc/Config.in
@@ -16,11 +16,14 @@ config BR2_GCC_VERSION_3_4_4
 
 config BR2_GCC_VERSION_4_0_3
        bool
 
 config BR2_GCC_VERSION_4_0_3
        bool

-       default y if BR2_LINUX_2_6_ARUBA
+       default y if BR2_LINUX_2_6_ARUBA || BR2_LINUX_2_6_XSCALE
+
+config BR2_GCC_VERSION_4_1_0
+       bool

 
 choice
        prompt "GCC compiler Version" if CONFIG_DEVEL
 
 choice
        prompt "GCC compiler Version" if CONFIG_DEVEL

-       default BR2_GCC_VERSION_4_0_3 if BR2_LINUX_2_6_ARUBA
+       default BR2_GCC_VERSION_4_0_3 if BR2_LINUX_2_6_ARUBA || BR2_LINUX_2_6_XSCALE

        default BR2_GCC_VERSION_3_4_4 if BR2_LINUX_2_4_BRCM
        default BR2_GCC_VERSION_3_4_6
        help
        default BR2_GCC_VERSION_3_4_4 if BR2_LINUX_2_4_BRCM
        default BR2_GCC_VERSION_3_4_6
        help

diff --git a/openwrt/toolchain/gdb/patches/830-arm_gcc4.patch b/openwrt/toolchain/gdb/patches/830-arm_gcc4.patch
new file mode 100644 (file)
index 0000000..5441e17
--- /dev/null
+++ b/openwrt/toolchain/gdb/patches/830-arm_gcc4.patch
@@ -0,0 +1,93 @@
+diff -ur gdb-6.3/sim/arm/iwmmxt.c gdb-6.3-owrt/sim/arm/iwmmxt.c
+--- gdb-6.3/sim/arm/iwmmxt.c   2003-03-27 18:13:33.000000000 +0100
++++ gdb-6.3-owrt/sim/arm/iwmmxt.c      2006-04-12 15:06:03.000000000 +0200
+@@ -2114,7 +2114,7 @@
+ 
+         s = (signed long) a * (signed long) b;
+ 
+-        (signed long long) t += s;
++        t = t + (ARMdword) s;
+         }
+       else
+         {
+@@ -2130,7 +2130,7 @@
+     wR [BITS (12, 15)] = 0;
+ 
+   if (BIT (21))       /* Signed.  */
+-    (signed long long) wR[BITS (12, 15)] += (signed long long) t;
++    wR[BITS (12, 15)] += t;
+   else
+     wR [BITS (12, 15)] += t;
+ 
+@@ -2166,7 +2166,7 @@
+         b = wRHALF (BITS (0, 3), i * 2);
+         b = EXTEND16 (b);
+ 
+-        (signed long) s1 = a * b;
++        s1 = (ARMdword) (a * b);
+ 
+         a = wRHALF (BITS (16, 19), i * 2 + 1);
+         a = EXTEND16 (a);
+@@ -2174,7 +2174,7 @@
+         b = wRHALF (BITS (0, 3), i * 2 + 1);
+         b = EXTEND16 (b);
+ 
+-        (signed long) s2 = a * b;
++        s2 = (ARMdword) (a * b);
+         }
+       else                    /* Unsigned.  */
+         {
+@@ -2183,12 +2183,12 @@
+         a = wRHALF (BITS (16, 19), i * 2);
+         b = wRHALF (BITS ( 0,  3), i * 2);
+ 
+-        (unsigned long) s1 = a * b;
++        s1 = (ARMdword) (a * b);
+ 
+         a = wRHALF (BITS (16, 19), i * 2 + 1);
+         b = wRHALF (BITS ( 0,  3), i * 2 + 1);
+ 
+-        (signed long) s2 = a * b;
++        s2 = (ARMdword) a * b;
+         }
+ 
+       r |= (ARMdword) ((s1 + s2) & 0xffffffff) << (i ? 32 : 0);
+@@ -2914,9 +2914,9 @@
+       
+     case Dqual:
+       if (shift > 63)
+-      r = (wR [BITS (16, 19)] & 0x8000000000000000) ? 0xffffffffffffffff : 0;
++      r = (wR [BITS (16, 19)] & 0x8000000000000000ULL) ? 0xffffffffffffffffULL : 0;
+       else
+-      r = ((signed long long) (wR[BITS (16, 19)] & 0xffffffffffffffff) >> shift);
++      r = ((signed long long) (wR[BITS (16, 19)] & 0xffffffffffffffffULL) >> shift);
+       SIMD64_SET (psr, NBIT64 (r), SIMD_NBIT);
+       SIMD64_SET (psr, ZBIT64 (r), SIMD_ZBIT);
+       break;
+@@ -2985,7 +2985,7 @@
+       if (shift > 63)
+       r = 0;
+       else
+-      r = (wR [BITS (16, 19)] & 0xffffffffffffffff) >> shift;
++      r = (wR [BITS (16, 19)] & 0xffffffffffffffffULL) >> shift;
+ 
+       SIMD64_SET (psr, NBIT64 (r), SIMD_NBIT);
+       SIMD64_SET (psr, ZBIT64 (r), SIMD_ZBIT);
+@@ -3287,7 +3287,7 @@
+       r = wRWORD (BITS (16, 19), 1);
+ 
+       if (BIT (21) && NBIT32 (r))
+-      r |= 0xffffffff00000000;
++      r |= 0xffffffff00000000ULL;
+ 
+       SIMD64_SET (psr, NBIT64 (r), SIMD_NBIT);
+       SIMD64_SET (psr, ZBIT64 (r), SIMD_ZBIT);
+@@ -3354,7 +3354,7 @@
+       r = wRWORD (BITS (16, 19), 0);
+ 
+       if (BIT (21) && NBIT32 (r))
+-      r |= 0xffffffff00000000;
++      r |= 0xffffffff00000000ULL;
+ 
+       SIMD64_SET (psr, NBIT64 (r), SIMD_NBIT);
+       SIMD64_SET (psr, ZBIT64 (r), SIMD_ZBIT);

diff --git a/openwrt/toolchain/kernel-headers/Makefile b/openwrt/toolchain/kernel-headers/Makefile
index 027c3e722c6eea3c2f0f49229888693aac6ba4a9..65fbed859bfd7444dfcdab9a13dedcfab102d13a 100644 (file)
--- a/openwrt/toolchain/kernel-headers/Makefile
+++ b/openwrt/toolchain/kernel-headers/Makefile
@@ -16,6 +16,7 @@ LINUX_HEADERS_ARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
        -e 's/mipsel/mips/' \
        -e 's/powerpc/ppc/' \
        -e 's/sh[234]/sh/' \
        -e 's/mipsel/mips/' \
        -e 's/powerpc/ppc/' \
        -e 's/sh[234]/sh/' \

+       -e 's/armeb/arm/' \

        )
 
 $(DL_DIR)/$(LINUX_HEADERS_SOURCE):
        )
 
 $(DL_DIR)/$(LINUX_HEADERS_SOURCE):

diff --git a/openwrt/toolchain/kernel-headers/files/config.arm b/openwrt/toolchain/kernel-headers/files/config.arm
new file mode 100644 (file)
index 0000000..fc7630a
--- /dev/null
+++ b/openwrt/toolchain/kernel-headers/files/config.arm
@@ -0,0 +1,778 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_ARM=y
+# CONFIG_EISA is not set
+# CONFIG_SBUS is not set
+# CONFIG_MCA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_GENERIC_BUST_SPINLOCK is not set
+# CONFIG_GENERIC_ISA_DMA is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_OBSOLETE is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_INTEGRATOR=y
+# CONFIG_ARCH_OMAHA is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_MX1ADS is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_RISCSTATION is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Archimedes/A5000 Implementations
+#
+
+#
+# Archimedes/A5000 Implementations (select only ONE)
+#
+# CONFIG_ARCH_ARC is not set
+# CONFIG_ARCH_A5K is not set
+
+#
+# Footbridge Implementations
+#
+# CONFIG_ARCH_CATS is not set
+# CONFIG_ARCH_PERSONAL_SERVER is not set
+# CONFIG_ARCH_EBSA285_ADDIN is not set
+# CONFIG_ARCH_EBSA285_HOST is not set
+# CONFIG_ARCH_NETWINDER is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ACCELENT is not set
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_ASSABET_NEPONSET is not set
+# CONFIG_SA1100_ADSAGC is not set
+# CONFIG_SA1100_ADSBITSY is not set
+# CONFIG_SA1100_ADSBITSYPLUS is not set
+# CONFIG_SA1100_BRUTUS is not set
+# CONFIG_SA1100_CEP is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_H3XXX is not set
+# CONFIG_H3600_SLEEVE is not set
+# CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
+# CONFIG_SA1100_FREEBIRD is not set
+# CONFIG_SA1100_FRODO is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HUW_WEBPANEL is not set
+# CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_NANOENGINE is not set
+# CONFIG_SA1100_OMNIMETER is not set
+# CONFIG_SA1100_PANGOLIN is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SIMPUTER is not set
+# CONFIG_SA1100_PFS168 is not set
+# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
+# CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_USB is not set
+# CONFIG_SA1100_USB_NETLINK is not set
+# CONFIG_SA1100_USB_CHAR is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# AT91RM9200 Implementations
+#
+# CONFIG_ARCH_AT91RM9200DK is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_FORTUNET is not set
+# CONFIG_ARCH_GUIDEA07 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_EP7211 is not set
+# CONFIG_ARCH_EP7212 is not set
+# CONFIG_ARCH_ACORN is not set
+# CONFIG_FOOTBRIDGE is not set
+# CONFIG_FOOTBRIDGE_HOST is not set
+# CONFIG_FOOTBRIDGE_ADDIN is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+# CONFIG_CPU_26 is not set
+# CONFIG_CPU_ARM610 is not set
+# CONFIG_CPU_ARM710 is not set
+# CONFIG_CPU_ARM720T is not set
+# CONFIG_CPU_ARM920T is not set
+# CONFIG_CPU_ARM922T is not set
+# CONFIG_PLD is not set
+# CONFIG_CPU_ARM926T is not set
+# CONFIG_CPU_ARM1020 is not set
+# CONFIG_CPU_ARM1026 is not set
+# CONFIG_CPU_SA110 is not set
+# CONFIG_CPU_SA1100 is not set
+# CONFIG_CPU_32v3 is not set
+CONFIG_CPU_32v4=y
+
+#
+# Processor Features
+#
+# CONFIG_DISCONTIGMEM is not set
+
+#
+# General setup
+#
+CONFIG_PCI_INTEGRATOR=y
+CONFIG_PCI=y
+# CONFIG_ISA is not set
+# CONFIG_ISA_DMA is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_CPU_FREQ is not set
+CONFIG_PCI_NAMES=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+
+#
+# At least one math emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_PM is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=1f04 mem=32M"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_AMDSTD is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_NORA is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_CDB89712 is not set
+# CONFIG_MTD_SA1100 is not set
+# CONFIG_MTD_DC21285 is not set
+# CONFIG_MTD_IQ80310 is not set
+# CONFIG_MTD_EPXA10DB is not set
+# CONFIG_MTD_FORTUNET is not set
+# CONFIG_MTD_AUTCPU12 is not set
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_CEIVA is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+
+#
+#    SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#  
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_ARM_AM79C961A is not set
+# CONFIG_ARM_CIRRUS is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_DGRS is not set
+# CONFIG_DM9102 is not set
+CONFIG_EEPRO100=y
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_LNE390 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_NE3210 is not set
+# CONFIG_ES3210 is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNDANCE_MMIO is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_SERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+CONFIG_MOUSE=y
+CONFIG_PSMOUSE=y
+# CONFIG_82C710_MOUSE is not set
+# CONFIG_PC110_PAD is not set
+# CONFIG_MK712_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_TMPFS is not set
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+CONFIG_ROMFS_FS=y
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=y
+CONFIG_LOCKD=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+# CONFIG_NLS is not set
+
+#
+# Console drivers
+#
+CONFIG_KMI_KEYB=y
+CONFIG_KMI_MOUSE=y
+CONFIG_PC_KEYMAP=y
+CONFIG_VGA_CONSOLE=y
+
+#
+# Frame-buffer support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_NO_PGT_CACHE is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_DC21285_PORT is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+# CONFIG_ZLIB_INFLATE is not set
+# CONFIG_ZLIB_DEFLATE is not set

diff --git a/openwrt/toolchain/uClibc/files/config.armeb b/openwrt/toolchain/uClibc/files/config.armeb
new file mode 100644 (file)
index 0000000..a9665d5
--- /dev/null
+++ b/openwrt/toolchain/uClibc/files/config.armeb
@@ -0,0 +1,167 @@
+#
+# Automatically generated make config: don't edit
+#
+# TARGET_alpha is not set
+TARGET_arm=y
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_i386 is not set
+# TARGET_i960 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_x86_64 is not set
+
+#
+# Target Architecture Features and Options
+#
+HAVE_ELF=y
+ARCH_SUPPORTS_LITTLE_ENDIAN=y
+TARGET_ARCH="arm"
+ARCH_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_GENERIC_ARM is not set
+# CONFIG_ARM610 is not set
+# CONFIG_ARM710 is not set
+# CONFIG_ARM720T is not set
+# CONFIG_ARM920T is not set
+# CONFIG_ARM922T is not set
+# CONFIG_ARM926T is not set
+# CONFIG_ARM1136JF_S is not set
+# CONFIG_ARM_SA110 is not set
+# CONFIG_ARM_SA1100 is not set
+CONFIG_ARM_XSCALE=y
+# ARCH_LITTLE_ENDIAN is not set
+ARCH_BIG_ENDIAN=y
+# ARCH_HAS_NO_MMU is not set
+ARCH_HAS_MMU=y
+UCLIBC_HAS_FLOATS=y
+HAS_FPU=y
+# DO_C99_MATH is not set
+KERNEL_SOURCE="./toolchain_build_armeb/linux"
+C_SYMBOL_PREFIX=""
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# HAVE_NO_SHARED is not set
+HAVE_SHARED=y
+# ARCH_HAS_NO_LDSO is not set
+BUILD_UCLIBC_LDSO=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# LDSO_RUNPATH is not set
+# DL_FINI_CRT_COMPAT is not set
+UCLIBC_CTOR_DTOR=y
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+UCLIBC_HAS_LFS=y
+# UCLIBC_STATIC_LDCONFIG is not set
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+HAS_SHADOW=y
+# UNIX98PTY_ONLY is not set
+ASSUME_DEVPTS=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Networking Support
+#
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+# UCLIBC_HAS_WORDEXP is not set
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# uClibc security related options
+#
+# UCLIBC_SECURITY is not set
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX=""
+# DODEBUG is not set
+# DODEBUG_PT is not set
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+WARNINGS="-Wall"
+# UCLIBC_MJN3_ONLY is not set

diff --git a/openwrt/toolchain/uClibc/patches/140-uclibc_do_div_ldso.patch b/openwrt/toolchain/uClibc/patches/140-uclibc_do_div_ldso.patch
new file mode 100644 (file)
index 0000000..b19d55f
--- /dev/null
+++ b/openwrt/toolchain/uClibc/patches/140-uclibc_do_div_ldso.patch
@@ -0,0 +1,47 @@
+diff -ur uClibc-0.9.28/ldso/include/dl-string.h uClibc-0.9.28.openwrt/ldso/include/dl-string.h
+--- uClibc-0.9.28/ldso/include/dl-string.h     2005-08-18 00:49:41.000000000 +0200
++++ uClibc-0.9.28.openwrt/ldso/include/dl-string.h     2006-04-12 11:07:49.000000000 +0200
+@@ -4,6 +4,14 @@
+ #include <dl-sysdep.h> // for do_rem
+ #include <features.h>
+ 
++/* provide some sane defaults */
++#ifndef do_rem
++# define do_rem(result, n, base) ((result) = (n) % (base))
++#endif
++#ifndef do_div_10
++# define do_div_10(result, remain) ((result) /= 10)
++#endif
++
+ static size_t _dl_strlen(const char * str);
+ static char *_dl_strcat(char *dst, const char *src);
+ static char * _dl_strcpy(char * dst,const char *src);
+@@ -228,7 +236,7 @@
+           char temp;
+           do_rem(temp, i, 10);
+           *--p = '0' + temp;
+-          i /= 10;
++          do_div_10(i, temp);
+       } while (i > 0);
+       return p;
+ }
+@@ -318,7 +326,7 @@
+       do { \
+               do_rem(v, (X), 10); \
+               *--tmp2 = '0' + v; \
+-              (X) /= 10; \
++              do_div_10((X), v); \
+       } while ((X) > 0); \
+       _dl_write(2, tmp2, tmp1 - tmp2 + sizeof(tmp) - 1); \
+ }
+diff -ur uClibc-0.9.28/ldso/ldso/arm/dl-sysdep.h uClibc-0.9.28.openwrt/ldso/ldso/arm/dl-sysdep.h
+--- uClibc-0.9.28/ldso/ldso/arm/dl-sysdep.h    2005-08-18 00:49:41.000000000 +0200
++++ uClibc-0.9.28.openwrt/ldso/ldso/arm/dl-sysdep.h    2006-04-12 11:31:58.000000000 +0200
+@@ -43,6 +43,7 @@
+       return m;
+ }
+ #define do_rem(result, n, base) ((result) = arm_modulus(n, base))
++#define do_div_10(result, remain) ((result) = (((result) - (remain)) / 2) * -(-1ul / 5ul))
+ 
+ /* Here we define the magic numbers that this dynamic loader should accept */
+ #define MAGIC1 EM_ARM