This patch adds support for the MikroTik RouterBOARD hAP ac lite
(RB952Ui-5ac2nD).
The hAP ac lite is nearly identical to the hAP, with an added QCA9887
5GHz radio. The 2.4GHz radio ID is also changed in the hAP ac lite.
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
rb-941-2nd)
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
rb-941-2nd)
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
+rb-951ui-2nd|\
+rb-952ui-5ac2nd)
ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
rb-750up-r2|\
rb-951ui-2hnd|\
rb-951ui-2nd|\
rb-750up-r2|\
rb-951ui-2hnd|\
rb-951ui-2nd|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
;;
rb-750up-r2|\
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
;;
rb-750up-r2|\
+rb-951ui-2nd|\
+rb-952ui-5ac2nd)
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
;;
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
;;
rb-912uag-5hpnd|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-912uag-5hpnd|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-lhg-5nd|\
rb-mapl-2nd)
status_led="rb:green:user"
rb-lhg-5nd|\
rb-mapl-2nd)
status_led="rb:green:user"
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
+ rb-952ui-5ac2nd)
+ ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
+ ;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")
*"RouterBOARD 951Ui-2nD")
name="rb-951ui-2nd"
;;
*"RouterBOARD 951Ui-2nD")
name="rb-951ui-2nd"
;;
+ *"RouterBOARD 952Ui-5ac2nD")
+ name="rb-952ui-5ac2nd"
+ ;;
*"RouterBOARD LHG 5nD")
name="rb-lhg-5nd"
;;
*"RouterBOARD LHG 5nD")
name="rb-lhg-5nd"
;;
rb-750up-r2|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-750up-r2|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-lhg-5nd|\
rb-mapl-2nd)
return 0
rb-lhg-5nd|\
rb-mapl-2nd)
return 0
rb-750up-r2|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-750up-r2|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-lhg-5nd|\
rb-mapl-2nd)
# erase firmware if booted from initramfs
rb-lhg-5nd|\
rb-mapl-2nd)
# erase firmware if booted from initramfs
MikroTik RouterBOARD mAP lite
MikroTik RouterBOARD hAP lite
MikroTik RouterBOARD hAP
MikroTik RouterBOARD mAP lite
MikroTik RouterBOARD hAP lite
MikroTik RouterBOARD hAP
+ MikroTik RouterBOARD hAP ac lite
MikroTik RouterBOARD hEX PoE lite
MikroTik RouterBOARD hEX lite
MikroTik RouterBOARD LHG 5
MikroTik RouterBOARD hEX PoE lite
MikroTik RouterBOARD hEX lite
MikroTik RouterBOARD LHG 5
* - MikroTik RouterBOARD mAP L-2nD
* - MikroTik RouterBOARD 941L-2nD
* - MikroTik RouterBOARD 951Ui-2nD
* - MikroTik RouterBOARD mAP L-2nD
* - MikroTik RouterBOARD 941L-2nD
* - MikroTik RouterBOARD 951Ui-2nD
+ * - MikroTik RouterBOARD 952Ui-5ac2nD
* - MikroTik RouterBOARD 750UP r2
* - MikroTik RouterBOARD 750 r2
* - MikroTik RouterBOARD LHG 5nD
* - MikroTik RouterBOARD 750UP r2
* - MikroTik RouterBOARD 750 r2
* - MikroTik RouterBOARD LHG 5nD
* by the Free Software Foundation.
*/
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/routerboot.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/routerboot.h>
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "routerboot.h"
#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
#include "routerboot.h"
#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */
#define RBSPI_HAS_POE BIT(5)
#define RBSPI_HAS_MDIO1 BIT(6)
#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */
#define RBSPI_HAS_POE BIT(5)
#define RBSPI_HAS_MDIO1 BIT(6)
+#define RBSPI_HAS_PCI BIT(7)
#define RB_ROUTERBOOT_OFFSET 0x0000
#define RB_BIOS_SIZE 0x1000
#define RB_ROUTERBOOT_OFFSET 0x0000
#define RB_BIOS_SIZE 0x1000
if (flags & RBSPI_HAS_USB)
ath79_register_usb();
if (flags & RBSPI_HAS_USB)
ath79_register_usb();
+
+ if (flags & RBSPI_HAS_PCI)
+ ath79_register_pci();
- * The hAP, hEX lite and hEX PoE lite share the same platform
+ * The hAP, hAP ac lite, hEX lite and hEX PoE lite share the same platform
*/
static void __init rbspi_952_750r2_setup(u32 flags)
{
*/
static void __init rbspi_952_750r2_setup(u32 flags)
{
rbspi_peripherals_setup(flags);
rbspi_peripherals_setup(flags);
- /* GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 */
- rbspi_network_setup(flags, 1, 5, 0);
+ /*
+ * GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 (hAP),
+ * WLAN1 MAC IS HW MAC + 6 (hAP ac lite)
+ */
+ rbspi_network_setup(flags, 1, 5, 6);
if (flags & RBSPI_HAS_USB)
gpio_request_one(RB952_GPIO_USB_POWER,
if (flags & RBSPI_HAS_USB)
gpio_request_one(RB952_GPIO_USB_POWER,
- * Init the hAP hardware (QCA953x).
+ * Init the hAP (ac lite) hardware (QCA953x).
* The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
* to LAN on the casing, and port 1 being assigned to "internet" (WAN).
* Port 1 is connected to PHY4 (the ports are labelled in reverse physical
* number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
* internal switch for the LAN ports.
* The device also has USB, PoE output and an SSR used for LED multiplexing.
* The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
* to LAN on the casing, and port 1 being assigned to "internet" (WAN).
* Port 1 is connected to PHY4 (the ports are labelled in reverse physical
* number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
* internal switch for the LAN ports.
* The device also has USB, PoE output and an SSR used for LED multiplexing.
+ * The 952Ui-5ac2nD (hAP ac lite) is nearly identical to the hAP, it adds a
+ * QCA9887 5GHz radio via PCI and moves 2.4GHz from WLAN0 to WLAN1.
*/
static void __init rb952_setup(void)
{
*/
static void __init rb952_setup(void)
{
- u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
+ u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
RBSPI_HAS_SSR | RBSPI_HAS_POE;
if (rbspi_platform_setup())
return;
RBSPI_HAS_SSR | RBSPI_HAS_POE;
if (rbspi_platform_setup())
return;
+ /* differentiate the hAP from the hAP ac lite */
+ if (strstr(mips_get_machine_name(), "952Ui-5ac2nD"))
+ flags |= RBSPI_HAS_WLAN1 | RBSPI_HAS_PCI;
+ else
+ flags |= RBSPI_HAS_WLAN0;
+
rbspi_952_750r2_setup(flags);
}
rbspi_952_750r2_setup(flags);
}
ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
- ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */
+ ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD / 952Ui-5ac2nD */
ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */
ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */
ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */
ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */
ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */
ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */
LOADER_TYPE := elf
KERNEL_INSTALL := 1
KERNEL := kernel-bin | lzma | loader-kernel
LOADER_TYPE := elf
KERNEL_INSTALL := 1
KERNEL := kernel-bin | lzma | loader-kernel
- SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-lhg-5nd rb-mapl-2nd
+ SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-lhg-5nd rb-mapl-2nd
IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
-TARGET_DEVICES += rb-nor-flash-16M
+define Device/rb-nor-flash-16M-ac
+ $(Device/rb-nor-flash-16M)
+ DEVICE_TITLE := MikroTik RouterBoard with 16 MB SPI NOR flash and ac
+ DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x ath10k-firmware-qca9887
+endef
+
+TARGET_DEVICES += rb-nor-flash-16M rb-nor-flash-16M-ac