- int irq = 0;
-
- if ((dev->bus->number == 0) && (slot == 0)) {
- write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
- read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
- printk("BAR0 at slot 0 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- } else if((dev->bus->number == 0) && (slot == 0x1)) {
- write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
- read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
- printk("BAR0 at slot 1 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- } else if((dev->bus->number == 0) && (slot == 0x2)) {
- write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
- read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
- printk("BAR0 at slot 2 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- } else if ((dev->bus->number == 1) && (slot == 0x0)) {
- switch (pcie_link_status) {
- case 2:
- case 6:
- irq = RALINK_INT_PCIE1;
- break;
- case 4:
- irq = RALINK_INT_PCIE2;
- break;
- default:
- irq = RALINK_INT_PCIE0;
- }
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else if ((dev->bus->number == 2) && (slot == 0x0)) {
- switch (pcie_link_status) {
- case 5:
- case 6:
- irq = RALINK_INT_PCIE2;
- break;
- default:
- irq = RALINK_INT_PCIE1;
- }
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else if ((dev->bus->number == 2) && (slot == 0x1)) {
- switch (pcie_link_status) {
- case 5:
- case 6:
- irq = RALINK_INT_PCIE2;
- break;
- default:
- irq = RALINK_INT_PCIE1;
- }
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else if ((dev->bus->number ==3) && (slot == 0x0)) {
- irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else if ((dev->bus->number ==3) && (slot == 0x1)) {
- irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else if ((dev->bus->number ==3) && (slot == 0x2)) {
- irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
- } else {
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- return 0;