-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca953x.dtsi"
-
-/ {
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
- button0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- button1 {
- label = "button right";
- linux,code = <BTN_0>;
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- button3 {
- label = "button left";
- linux,code = <BTN_1>;
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "gl-ar300m:green:usb";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
-
- wlan {
- label = "gl-ar300m:green:wlan";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- lan {
- label = "gl-ar300m:green:lan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- status {
- label = "gl-ar300m:green:status";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&swphy4>;
-};
-
-ð1 {
- mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x1002>;
-};