This does several cosmetic adjustments for AD7200's DTS:
- Make node name, DT label and label property consistent
- Drop wrong and unused spi4 label
- Use generic flash@0 node name
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
aliases {
mdio-gpio0 = &mdio0;
aliases {
mdio-gpio0 = &mdio0;
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
label-mac-device = &gmac2;
};
label-mac-device = &gmac2;
};
linux,code = <KEY_WPS_BUTTON>;
};
linux,code = <KEY_WPS_BUTTON>;
};
label = "led-enable";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
label = "led-enable";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
label = "blue:status";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
label = "blue:status";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
status = "okay";
pinctrl-0 = <&spi_pins>;
status = "okay";
pinctrl-0 = <&spi_pins>;
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;