+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2660-a1", "qca,qca9557";
+ model = "D-Link DAP-2660 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition@f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};