Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=
2be4f8a8b205ae1a37db44839864451ebe893e6e
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Enable flow control of LAN and WAN ports to
get better performance.
Setup pvid as 0 for all ports during initialisation
to avoid confusion during system or switch INIT.
Disable PORT MAC before config MAC to avoid it work abnormal.
This change is for IR-054144, IR-057315.
Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067
Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org>
Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
#define AR8216_PORT_STATUS_LINK_UP BIT(8)
#define AR8216_PORT_STATUS_LINK_AUTO BIT(9)
#define AR8216_PORT_STATUS_LINK_PAUSE BIT(10)
#define AR8216_PORT_STATUS_LINK_UP BIT(8)
#define AR8216_PORT_STATUS_LINK_AUTO BIT(9)
#define AR8216_PORT_STATUS_LINK_PAUSE BIT(10)
+#define AR8216_PORT_STATUS_FLOW_CONTROL BIT(12)
#define AR8216_REG_PORT_CTRL(_i) (AR8216_PORT_OFFSET(_i) + 0x0004)
#define AR8216_REG_PORT_CTRL(_i) (AR8216_PORT_OFFSET(_i) + 0x0004)
else
t = AR8216_PORT_STATUS_LINK_AUTO;
else
t = AR8216_PORT_STATUS_LINK_AUTO;
- ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+ if (port != AR8216_PORT_CPU && port != 6) {
+ /*hw limitation:if configure mac when there is traffic,
+ port MAC may work abnormal. Need disable lan&wan mac at fisrt*/
+ ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), 0);
+ msleep(100);
+ t |= AR8216_PORT_STATUS_FLOW_CONTROL;
+ ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+ } else {
+ ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
+ }
+
ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);
- t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
- t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
- ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
+ ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), 0);
t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);