The first gpio controller (gpio or gpio0) is always enabled by
default in the SoC DTSI files. No need to set status=okay in the
device DTS files a second time.
Remove the redundant statements.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
45 files changed:
mtd-mac-address = <&factory 0x28>;
};
mtd-mac-address = <&factory 0x28>;
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
&gmac0 {
mtd-mac-address = <&factory 0xe006>;
};
&gmac0 {
mtd-mac-address = <&factory 0xe006>;
};
-&gpio {
- status = "okay";
-};
-
&sdhci {
status = "okay";
};
&sdhci {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "spi", "uartlite";
&state_default {
gpio {
groups = "i2c", "spi", "uartlite";
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "spi", "uartlite";
&state_default {
gpio {
groups = "i2c", "spi", "uartlite";
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "uartlite", "mdio";
&state_default {
gpio {
groups = "i2c", "uartlite", "mdio";
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "spi", "i2c", "jtag", "mdio", "uartlite";
&state_default {
gpio {
groups = "spi", "i2c", "jtag", "mdio", "uartlite";
-&gpio0 {
- status = "okay";
-};
-
ðernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
ðernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "uartlite", "mdio";
&state_default {
gpio {
groups = "i2c", "uartlite", "mdio";
-&gpio0 {
- status = "okay";
-};
-
&gpio2 {
status = "okay";
};
&gpio2 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
ðernet {
status = "okay";
};
ðernet {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
-&gpio0 {
- status = "okay";
-};
-
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
&state_default {
gpio {
groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
model = "EASYACC WI-STOR WIZARD 8800";
};
model = "EASYACC WI-STOR WIZARD 8800";
};
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
&gpio1 {
status = "okay";
};
&gpio1 {
status = "okay";
};
-&gpio0 {
- status = "okay";
-};
-