It has to be <board>:<colour>:<function> and is expected exactly this
way by the userspace scripts.
While at it, fix some whitespace issues in the dts file and rename the
flash node as required upstream.
Signed-off-by: Mathias Kresin <dev@kresin.me>
compatible = "gpio-leds";
led_status: status {
compatible = "gpio-leds";
led_status: status {
- label = "lava,lr-25g001:green:status";
+ label = "lr-25g001:green:status";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wifi2g {
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wifi2g {
- label = "lava,lr-25g001:green:wifi2g";
+ label = "lr-25g001:green:wifi2g";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wifi5g {
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wifi5g {
- label = "lava,lr-25g001:green:wifi5g";
+ label = "lr-25g001:green:wifi5g";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x00000000 /* PORT6_STATUS */
0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x00000000 /* PORT6_STATUS */
reg = <4>;
phy-mode = "rgmii";
};
reg = <4>;
phy-mode = "rgmii";
};