- /* This is a special binding that controls how the malibu PHY are
- * init. This value reflect the PHY addr of the first malibu PHY.
- * Malibu PHY are in a bundle of 5 PHY.
- * Some device might have some port not connected.
- * SSDK still needs the addrs of the first PHY (even if not connected)
- * to correctly setup the malibu PHY.
- *
- * This is needed as previously SSDK based this on the port bmp, but
- * this can be problematic now that we specify correct bmp.
- *
- * Most common configuration have the malibu PHY placed at 0.
- * But some device might have it placed at address 16.
- * To drive the correct value, check the port id of the malibu PHY
- * and try to understand what is the first one in devices where some
- * port are missing. port_phyinfo is normally the way to go to derive
- * this value in the few special cases.
- */
- malibu_first_phy_addr = <0>;