This partially reverts:
commit
cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data")
U-Boot on these devices mangles the device tree,
so nvmem-cell type calibration doesn't work.
Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data")
Signed-off-by: Kasparas Elzbutas <elzkas@gmail.com>
(added reference to commit, rewrote commit message)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
;;
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+ ;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x1000 0x2f20
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x1000 0x2f20
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
;;
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+ ;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x5000 0x2f20
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x5000 0x2f20
label = "0:ART";
reg = <0x2e0000 0x10000>;
read-only;
label = "0:ART";
reg = <0x2e0000 0x10000>;
read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
};
config: partition@2f0000 {
label = "0:CONFIG";
reg = <0x2f0000 0x10000>;
read-only;
};
config: partition@2f0000 {
label = "0:CONFIG";
reg = <0x2f0000 0x10000>;
read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_config_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 62 0>;
};
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 62 0>;
};
-
-&wifi0 {
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
- mac-address-increment = <2>;
-};
-
-&wifi1 {
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
- mac-address-increment = <3>;
-};