add support for routed RFC2684 encaps. on ATM (patches written by joseangel), close #58
authorFelix Fietkau <nbd@openwrt.org>
Tue, 17 Jan 2006 15:37:37 +0000 (15:37 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 17 Jan 2006 15:37:37 +0000 (15:37 +0000)
SVN-Revision: 3003

openwrt/package/linux-atm/patches/100-br2684.patch
openwrt/target/linux/generic-2.4/patches/225-atm_br2684.patch [new file with mode: 0644]
openwrt/target/linux/image/ar7/Makefile

index 2eddf008e760a7cea5a0e52156bcae4bb6957006..94239ae97cef22fd8de5ed5bfe1a2083349817ec 100644 (file)
@@ -1,6 +1,185 @@
+diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
+--- linux-atm-2.4.1/configure.in       2003-04-25 04:17:05.000000000 +0200
++++ linux-atm-2.4.1.new/configure.in   2005-07-27 15:45:49.532396543 +0200
+@@ -153,26 +153,6 @@
+               src/Makefile \
+               src/include/Makefile \
+               src/lib/Makefile \
+-              src/test/Makefile \
+-              src/debug/Makefile \
+-              src/qgen/Makefile \
+-              src/saal/Makefile \
+-              src/sigd/Makefile \
+-              src/maint/Makefile \
+-              src/arpd/Makefile \
+-              src/ilmid/Makefile \
+-              src/ilmid/asn1/Makefile \
+-              src/man/Makefile \
+-              src/led/Makefile \
+-              src/lane/Makefile \
+-              src/mpoad/Makefile \
+-              src/switch/Makefile \
+-              src/switch/debug/Makefile \
+-              src/switch/tcp/Makefile \
+-              src/config/Makefile \
+-              src/config/init-redhat/Makefile \
+-              src/extra/Makefile \
+-              src/extra/linux-atm.spec \
+-              src/extra/ANS/Makefile
++              src/br2684/Makefile \
+               )
+diff -ruN linux-atm-2.4.1/src/br2684/Makefile linux-atm-2.4.1.new/src/br2684/Makefile
+--- linux-atm-2.4.1/src/br2684/Makefile        1970-01-01 02:00:00.000000000 +0200
++++ linux-atm-2.4.1.new/src/br2684/Makefile    2002-07-15 23:44:25.000000000 +0200
+@@ -0,0 +1,13 @@
++PREFIX=${TI_FILESYSTEM}
++
++all: br2684ctl
++
++br2684ctl: br2684ctl.c
++      gcc -latm -o br2684ctl br2684ctl.c 
++      strip br2684ctl
++
++install: br2684ctl
++      cp br2684ctl $(PREFIX)/usr/sbin/
++
++clean:
++      rm -rf br2684ctl *.o
+diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
+--- linux-atm-2.4.1/src/Makefile.am    2001-10-03 23:14:53.000000000 +0200
++++ linux-atm-2.4.1.new/src/Makefile.am        2005-07-27 15:33:52.389309711 +0200
+@@ -1,3 +1,2 @@
+-SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
+-              mpoad switch config extra
++SUBDIRS = include lib br2684
+
+diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h
+--- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-atm-2.4.1/src/include/linux/atmbr2684.h      2005-11-13 00:06:42.000000000 +0100
+@@ -0,0 +1,117 @@
++#ifndef _LINUX_ATMBR2684_H
++#define _LINUX_ATMBR2684_H
++
++#include <linux/atm.h>
++#include <linux/if.h>         /* For IFNAMSIZ */
++#include <linux/if_ether.h>   /* ETH_P_* */
++
++/*
++ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
++ * ethernet is supported
++ */
++#define BR2684_MEDIA_ETHERNET (0)     /* 802.3 */
++#define BR2684_MEDIA_802_4    (1)     /* 802.4 */
++#define BR2684_MEDIA_TR               (2)     /* 802.5 - token ring */
++#define BR2684_MEDIA_FDDI     (3)
++#define BR2684_MEDIA_802_6    (4)     /* 802.6 */
++
++/*
++ * Is there FCS inbound on this VC?  This currently isn't supported.
++ */
++#define BR2684_FCSIN_NO               (0)
++#define BR2684_FCSIN_IGNORE   (1)
++#define BR2684_FCSIN_VERIFY   (2)
++
++/*
++ * Is there FCS outbound on this VC?  This currently isn't supported.
++ */
++#define BR2684_FCSOUT_NO      (0)
++#define BR2684_FCSOUT_SENDZERO        (1)
++#define BR2684_FCSOUT_GENERATE        (2)
++
++/*
++ * Does this VC include LLC encapsulation?
++ */
++#define BR2684_ENCAPS_VC      (0)     /* VC-mux */
++#define BR2684_ENCAPS_LLC     (1)
++#define BR2684_ENCAPS_AUTODETECT (2)  /* Unsuported */
++
++/*
++ * Is this VC bridged or routed?
++ */
++
++#define       BR2684_PAYLOAD_ROUTED   (0)
++#define       BR2684_PAYLOAD_BRIDGED  (1)
++
++
++/*
++ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_newif_br2684 {
++      atm_backend_t backend_num;      /* ATM_BACKEND_BR2684 */
++      int media;              /* BR2684_MEDIA_* */
++      char ifname[IFNAMSIZ];
++      int mtu;
++      int payload;            /* bridged or routed */
++};
++
++/*
++ * This structure is used to specify a br2684 interface - either by a
++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
++ */
++#define BR2684_FIND_BYNOTHING (0)
++#define BR2684_FIND_BYNUM     (1)
++#define BR2684_FIND_BYIFNAME  (2)
++struct br2684_if_spec {
++      int method;             /* BR2684_FIND_* */
++      union {
++              char ifname[IFNAMSIZ];
++              int devnum;
++      } spec;
++};
++
++/*
++ * This is for the ATM_SETBACKEND call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_backend_br2684 {
++      atm_backend_t backend_num;      /* ATM_BACKEND_BR2684 */
++      struct br2684_if_spec ifspec;
++      int fcs_in;             /* BR2684_FCSIN_* */
++      int fcs_out;            /* BR2684_FCSOUT_* */
++      int fcs_auto;           /* 1: fcs_{in,out} disabled if no FCS rx'ed */
++      int encaps;             /* BR2684_ENCAPS_* */
++      int payload;            /* BR2684_PAYLOAD_* */
++      int has_vpiid;          /* 1: use vpn_id - Unsupported */
++      __u8 vpn_id[7];
++      int send_padding;       /* unsupported */
++      int min_size;           /* we will pad smaller packets than this */
++};
++
++/*
++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
++ * terminating a large number of IP-only vcc's.  When netfilter allows
++ * efficient per-if in/out filters, this support will be removed
++ */
++struct br2684_filter {
++      __u32 prefix;           /* network byte order */
++      __u32 netmask;          /* 0 = disable filter */
++};
++
++struct br2684_filter_set {
++      struct br2684_if_spec ifspec;
++      struct br2684_filter filter;
++};
++
++enum br2684_payload {
++      p_routed = BR2684_PAYLOAD_ROUTED,
++      p_bridged = BR2684_PAYLOAD_BRIDGED,
++};
++
++#define BR2684_SETFILT        _IOW( 'a', ATMIOC_BACKEND + 0, \
++                              struct br2684_filter_set)
++
++#endif                                /* _LINUX_ATMBR2684_H */
+diff Nur linux-atm-2.4.1.orig/src/br2684/br2684ctl.c linux-atm-2.4.1/src/br2684/br2684ctl.c
 --- linux-atm-2.4.1.orig/src/br2684/br2684ctl.c
 +++ linux-atm-2.4.1/src/br2684/br2684ctl.c
-@@ -0,0 +1,251 @@
+@@ -0,0 +1,302 @@
 +#include <stdio.h>
 +#include <stdlib.h>
 +#include <unistd.h>
 +
 +int lastsock, lastitf;
 +
-+
-+void fatal(const char *str, int i)
++void fatal(char *str, int i)
 +{
-+  syslog (LOG_ERR,"Fatal: %s",str);
-+  exit(-2);
++      syslog(LOG_ERR, "Fatal: %s", str);
++      exit(-2);
 +};
 +
 +
 +void exitFunc(void)
 +{
-+  syslog (LOG_PID,"Daemon terminated\n");     
++      syslog(LOG_PID, "Daemon terminated\n");
 +}
 +
 +
-+int create_br(char *nstr)
++int create_pidfile(char *nstr)
 +{
-+  int num, err;
-+  
-+  if(lastsock<0) {
-+    lastsock = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5);
-+  }
-+  if (lastsock<0) {
-+    syslog(LOG_ERR, "socket creation failed: %s",strerror(errno));
-+  } else {
-+    /* create the device with ioctl: */
-+    num=atoi(nstr);
-+    if( num>=0 && num<1234567890){
-+      struct atm_newif_br2684 ni;
-+      ni.backend_num = ATM_BACKEND_BR2684;
-+      ni.media = BR2684_MEDIA_ETHERNET;
-+      ni.mtu = 1500;
-+      sprintf(ni.ifname, "nas%d", num);
-+      err=ioctl (lastsock, ATM_NEWBACKENDIF, &ni);
-+  
-+      if (err == 0)
-+      syslog(LOG_INFO, "Interface \"%s\" created sucessfully\n",ni.ifname);
-+      else
-+      syslog(LOG_INFO, "Interface \"%s\" could not be created, reason: %s\n",
-+             ni.ifname,
-+             strerror(errno));
-+      lastitf=num;    /* even if we didn't create, because existed, assign_vcc wil want to know it! */
-+    } else {
-+      syslog(LOG_ERR,"err: strange interface number %d", num );
-+    }
-+  }
-+  return 0;
++      FILE *pidfile = NULL;
++      char name[20];
++      int num;
++
++      if (nstr == NULL)
++              return -1;
++      num = atoi(nstr);
++      if (num < 0)
++              return -1;
++
++      snprintf(name, 20, "/var/run/nas%d.pid", num);
++      pidfile = fopen(name, "w");
++      if (pidfile == NULL)
++              return -1;
++      fprintf(pidfile, "%d", getpid());
++      fclose(pidfile);
++
++      return 0;
++}
++
++int create_br(char *nstr, int payload)
++{
++      int num, err;
++
++      if (lastsock < 0) {
++              lastsock = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5);
++      }
++      if (lastsock < 0) {
++              syslog(LOG_ERR, "socket creation failed: %s",
++                     strerror(errno));
++      } else {
++              /* create the device with ioctl: */
++              num = atoi(nstr);
++              if (num >= 0 && num < 1234567890) {
++                      struct atm_newif_br2684 ni;
++                      ni.backend_num = ATM_BACKEND_BR2684;
++                      ni.media = BR2684_MEDIA_ETHERNET;
++                      ni.mtu = 1500;
++                      ni.payload = payload;   /* bridged or routed */
++                      sprintf(ni.ifname, "nas%d", num);
++                      err = ioctl(lastsock, ATM_NEWBACKENDIF, &ni);
++
++                      if (err == 0)
++                              syslog(LOG_INFO,
++                                     "Interface \"%s\" created sucessfully\n",
++                                     ni.ifname);
++                      else
++                              syslog(LOG_INFO,
++                                     "Interface \"%s\" could not be created, reason: %s\n",
++                                     ni.ifname, strerror(errno));
++                      lastitf = num;  /* even if we didn't create, because existed, assign_vcc wil want to know it! */
++              } else {
++                      syslog(LOG_ERR, "err: strange interface number %d",
++                             num);
++              }
++      }
++      return 0;
 +}
 +
 +
-+int assign_vcc(char *astr, int encap, int bufsize, struct atm_qos qos)
++int assign_vcc(char *astr, int encap, int payload, int bufsize)
 +{
-+    int err;
-+    struct sockaddr_atmpvc addr;
-+    int fd;
-+    struct atm_backend_br2684 be;
-+
-+    memset(&addr, 0, sizeof(addr));
-+    err=text2atm(astr,(struct sockaddr *)(&addr), sizeof(addr), T2A_PVC);
-+    if (err!=0)
-+      syslog(LOG_ERR,"Could not parse ATM parameters (error=%d)\n",err);
-+    
++      int err, errno;
++      struct atm_qos qos;
++      struct sockaddr_atmpvc addr;
++      int fd;
++      struct atm_backend_br2684 be;
++
++      memset(&addr, 0, sizeof(addr));
++      err =
++          text2atm(astr, (struct sockaddr *) (&addr), sizeof(addr),
++                   T2A_PVC);
++      if (err != 0)
++              syslog(LOG_ERR,
++                     "Could not parse ATM parameters (error=%d)\n", err);
++
 +#if 0
-+    addr.sap_family = AF_ATMPVC;
-+    addr.sap_addr.itf = itf;
-+    addr.sap_addr.vpi = 0;
-+    addr.sap_addr.vci = vci;
++      addr.sap_family = AF_ATMPVC;
++      addr.sap_addr.itf = itf;
++      addr.sap_addr.vpi = 0;
++      addr.sap_addr.vci = vci;
 +#endif
-+    syslog(LOG_INFO,"Communicating over ATM %d.%d.%d, encapsulation: %s\n", addr.sap_addr.itf,
-+         addr.sap_addr.vpi,
-+         addr.sap_addr.vci,
-+         encap?"VC mux":"LLC");
-+    
-+    if ((fd = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5)) < 0)
-+      syslog(LOG_ERR,"failed to create socket %d, reason: %s", errno,strerror(errno));
-+    
-+    if (qos.aal == 0) {
-+      qos.aal                     = ATM_AAL5;
-+      qos.txtp.traffic_class      = ATM_UBR;
-+      qos.txtp.max_sdu            = 1524;
-+      qos.txtp.pcr                = ATM_MAX_PCR;
-+      qos.rxtp = qos.txtp;
-+    }
-+
-+    if ( (err=setsockopt(fd,SOL_SOCKET,SO_SNDBUF, &bufsize ,sizeof(bufsize))) )
-+      syslog(LOG_ERR,"setsockopt SO_SNDBUF: (%d) %s\n",err, strerror(err));
-+    
-+    if (setsockopt(fd, SOL_ATM, SO_ATMQOS, &qos, sizeof(qos)) < 0)
-+      syslog(LOG_ERR,"setsockopt SO_ATMQOS %d", errno);
-+
-+    err = connect(fd, (struct sockaddr*)&addr, sizeof(struct sockaddr_atmpvc));
-+    
-+    if (err < 0)
-+      fatal("failed to connect on socket", err);
-+    
-+    /* attach the vcc to device: */
-+    
-+    be.backend_num = ATM_BACKEND_BR2684;
-+    be.ifspec.method = BR2684_FIND_BYIFNAME;
-+    sprintf(be.ifspec.spec.ifname, "nas%d", lastitf);
-+    be.fcs_in = BR2684_FCSIN_NO;
-+    be.fcs_out = BR2684_FCSOUT_NO;
-+    be.fcs_auto = 0;
-+    be.encaps = encap ? BR2684_ENCAPS_VC : BR2684_ENCAPS_LLC;
-+    be.has_vpiid = 0;
-+    be.send_padding = 0;
-+    be.min_size = 0;
-+    err=ioctl (fd, ATM_SETBACKEND, &be);
-+    if (err == 0)
-+      syslog (LOG_INFO,"Interface configured");
-+    else {
-+      syslog (LOG_ERR,"Could not configure interface:%s",strerror(errno));
-+      exit(2);
-+    }
-+    return fd ;
++      syslog(LOG_INFO,
++             "Communicating over ATM %d.%d.%d, encapsulation: %s\n",
++             addr.sap_addr.itf, addr.sap_addr.vpi, addr.sap_addr.vci,
++             encap ? "VC mux" : "LLC");
++
++      if ((fd = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5)) < 0)
++              syslog(LOG_ERR, "failed to create socket %d, reason: %s",
++                     errno, strerror(errno));
++
++
++      memset(&qos, 0, sizeof(qos));
++      qos.aal = ATM_AAL5;
++      qos.txtp.traffic_class = ATM_UBR;
++      qos.txtp.max_sdu = 1524;
++      qos.txtp.pcr = ATM_MAX_PCR;
++      qos.rxtp = qos.txtp;
++
++      if ((err =
++           setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &bufsize,
++                      sizeof(bufsize))))
++              syslog(LOG_ERR, "setsockopt SO_SNDBUF: (%d) %s\n", err,
++                     strerror(err));
++
++      if (setsockopt(fd, SOL_ATM, SO_ATMQOS, &qos, sizeof(qos)) < 0)
++              syslog(LOG_ERR, "setsockopt SO_ATMQOS %d", errno);
++
++      err =
++          connect(fd, (struct sockaddr *) &addr,
++                  sizeof(struct sockaddr_atmpvc));
++
++      if (err < 0)
++              fatal("failed to connect on socket", err);
++
++      /* attach the vcc to device: */
++
++      be.backend_num = ATM_BACKEND_BR2684;
++      be.ifspec.method = BR2684_FIND_BYIFNAME;
++      sprintf(be.ifspec.spec.ifname, "nas%d", lastitf);
++      be.fcs_in = BR2684_FCSIN_NO;
++      be.fcs_out = BR2684_FCSOUT_NO;
++      be.fcs_auto = 0;
++      be.encaps = encap ? BR2684_ENCAPS_VC : BR2684_ENCAPS_LLC;
++      be.payload = payload;
++      be.has_vpiid = 0;
++      be.send_padding = 0;
++      be.min_size = 0;
++      err = ioctl(fd, ATM_SETBACKEND, &be);
++      if (err == 0)
++              syslog(LOG_INFO, "Interface configured");
++      else {
++              syslog(LOG_ERR, "Could not configure interface:%s",
++                     strerror(errno));
++              exit(2);
++      }
++      return fd;
 +}
 +
 +
++
 +void usage(char *s)
 +{
-+  printf("usage: %s [-b] [[-c number] [-e 0|1] [-s sndbuf] [-q qos] [-a [itf.]vpi.vci]*]*\n", s);
-+  exit(1);
++      printf
++          ("usage: %s [-b] [[-c number] [-e 0|1] [-p 0|1] [-t 4|6] [-a [itf.]vpi.vci]*]*\n",
++           s);
++      exit(1);
 +}
 +
 +
 +
-+int main (int argc, char **argv)
++int main(int argc, char **argv)
 +{
-+  int c, background=0, encap=0, sndbuf=8192;
-+  struct atm_qos reqqos;
-+  lastsock=-1;
-+  lastitf=0;
-+  
-+  /* st qos to 0 */
-+  memset(&reqqos, 0, sizeof(reqqos));
-+
-+  openlog (LOG_NAME,LOG_OPTION,LOG_FACILITY);
-+  if (argc>1)
-+    while ((c = getopt(argc, argv,"q:a:bc:e:s:?h")) !=EOF)
-+      switch (c) {
-+      case 'q':
-+      printf ("optarg : %s",optarg);
-+      if (text2qos(optarg,&reqqos,0)) fprintf(stderr,"QOS parameter invalid\n"); 
-+      break;
-+      case 'a':
-+      assign_vcc(optarg, encap, sndbuf, reqqos);
-+      break;
-+      case 'b':
-+      background=1;
-+      break;
-+      case 'c':
-+      create_br(optarg);
-+      break;
-+      case 'e':
-+      encap=(atoi(optarg));
-+      if(encap<0){
-+        syslog (LOG_ERR, "invalid encapsulation: %s:\n",optarg);
-+        encap=0;
-+      }
-+      break;
-+      case 's':
-+      sndbuf=(atoi(optarg));
-+      if(sndbuf<0){
-+        syslog(LOG_ERR, "Invalid sndbuf: %s, using size of 8192 instead\n",optarg);
-+        sndbuf=8192;
-+      }
-+      break;
-+      case '?':
-+      case 'h':
-+      default:
-+      usage(argv[0]);
-+      }
-+  else
-+    usage(argv[0]);
-+
-+  if (argc != optind) usage(argv[0]);
-+  
-+  if(lastsock>=0) close(lastsock);
-+  
-+  if (background) {
-+    pid_t pid;
-+    
-+    pid=fork();
-+    if (pid < 0) {
-+      fprintf(stderr,"Error detaching\n");
-+      exit(2);
-+    } else if (pid) 
-+      exit(0); // This is the parent
-+    
-+    // Become a process group and session group leader
-+    if (setsid()<0) {
-+      fprintf (stderr,"Could not set process group\n");
-+      exit(2);
-+    }
-+    
-+    // Fork again to let process group leader exit
-+    pid = fork();
-+    if (pid < 0) {
-+      fprintf(stderr,"Error detaching during second fork\n");
-+      exit(2);
-+    } else if (pid)
-+      exit(0); // This is the parent
-+    
-+    // Now we're ready for buisness
-+    chdir("/");            // Don't keep directories in use
-+    close(0); close(1); close(2);  // Close stdin, -out and -error
-+    /*
-+      Note that this implementation does not keep an open 
-+      stdout/err.
-+      If we need them they can be opened now
-+    */
-+    
-+  }
-+  
-+  syslog (LOG_INFO, "RFC 1483/2684 bridge daemon started\n"); 
-+  atexit (exitFunc);
-+  
-+  while (1) sleep(30);        /* to keep the sockets... */
-+  return 0;
-+}
++      int c, background = 0, encap = 0, sndbuf = 8192, payload = 1;
++      char *itfnum = NULL;
 +
-diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
---- linux-atm-2.4.1/configure.in       2003-04-25 04:17:05.000000000 +0200
-+++ linux-atm-2.4.1.new/configure.in   2005-07-27 15:45:49.532396543 +0200
-@@ -153,26 +153,6 @@
-               src/Makefile \
-               src/include/Makefile \
-               src/lib/Makefile \
--              src/test/Makefile \
--              src/debug/Makefile \
--              src/qgen/Makefile \
--              src/saal/Makefile \
--              src/sigd/Makefile \
--              src/maint/Makefile \
--              src/arpd/Makefile \
--              src/ilmid/Makefile \
--              src/ilmid/asn1/Makefile \
--              src/man/Makefile \
--              src/led/Makefile \
--              src/lane/Makefile \
--              src/mpoad/Makefile \
--              src/switch/Makefile \
--              src/switch/debug/Makefile \
--              src/switch/tcp/Makefile \
--              src/config/Makefile \
--              src/config/init-redhat/Makefile \
--              src/extra/Makefile \
--              src/extra/linux-atm.spec \
--              src/extra/ANS/Makefile
-+              src/br2684/Makefile \
-               )
-diff -ruN linux-atm-2.4.1/src/br2684/Makefile linux-atm-2.4.1.new/src/br2684/Makefile
---- linux-atm-2.4.1/src/br2684/Makefile        1970-01-01 02:00:00.000000000 +0200
-+++ linux-atm-2.4.1.new/src/br2684/Makefile    2002-07-15 23:44:25.000000000 +0200
-@@ -0,0 +1,13 @@
-+PREFIX=${TI_FILESYSTEM}
++      lastsock = -1;
++      lastitf = 0;
 +
-+all: br2684ctl
++      openlog(LOG_NAME, LOG_OPTION, LOG_FACILITY);
++      if (argc > 1)
++              while ((c = getopt(argc, argv, "a:bc:e:s:p:t:?h")) != EOF)
++                      switch (c) {
++                      case 'a':
++                              assign_vcc(optarg, encap, payload, sndbuf);
++                              break;
++                      case 'b':
++                              background = 1;
++                              break;
++                      case 'c':
++                              create_br(optarg, payload);
++                              itfnum = strdup(optarg);
++                              break;
++                      case 'e':
++                              encap = (atoi(optarg));
++                              if (encap < 0) {
++                                      syslog(LOG_ERR,
++                                             "invalid encapsulation: %s:\n",
++                                             optarg);
++                                      encap = 0;
++                              }
++                              break;
++                      case 's':
++                              sndbuf = (atoi(optarg));
++                              if (sndbuf < 0) {
++                                      syslog(LOG_ERR,
++                                             "Invalid sndbuf: %s, using size of 8192 instead\n",
++                                             optarg);
++                                      sndbuf = 8192;
++                              }
++                              break;
++                      case 'p':       /* payload type: routed (0) or bridged (1) */
++                              payload = atoi(optarg);
++                              break;
++                      case '?':
++                      case 'h':
++                      default:
++                              usage(argv[0]);
++      } else
++              usage(argv[0]);
 +
-+br2684ctl: br2684ctl.c
-+      gcc -latm -o br2684ctl br2684ctl.c 
-+      strip br2684ctl
++      if (argc != optind)
++              usage(argv[0]);
 +
-+install: br2684ctl
-+      cp br2684ctl $(PREFIX)/usr/sbin/
++      if (lastsock >= 0)
++              close(lastsock);
 +
-+clean:
-+      rm -rf br2684ctl *.o
-diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
---- linux-atm-2.4.1/src/Makefile.am    2001-10-03 23:14:53.000000000 +0200
-+++ linux-atm-2.4.1.new/src/Makefile.am        2005-07-27 15:33:52.389309711 +0200
-@@ -1,3 +1,2 @@
--SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
--              mpoad switch config extra
-+SUBDIRS = include lib br2684
-
++      if (background) {
++              pid_t pid;
++
++              pid = fork();
++              if (pid < 0) {
++                      fprintf(stderr, "Error detaching\n");
++                      exit(2);
++              } else if (pid)
++                      exit(0);        // This is the parent
++
++              // Become a process group and session group leader
++              if (setsid() < 0) {
++                      fprintf(stderr, "Could not set process group\n");
++                      exit(2);
++              }
++              // Fork again to let process group leader exit
++              pid = fork();
++              if (pid < 0) {
++                      fprintf(stderr,
++                              "Error detaching during second fork\n");
++                      exit(2);
++              } else if (pid)
++                      exit(0);        // This is the parent
++
++              // Now we're ready for buisness
++              chdir("/");     // Don't keep directories in use
++              close(0);
++              close(1);
++              close(2);       // Close stdin, -out and -error
++              /*
++                 Note that this implementation does not keep an open 
++                 stdout/err.
++                 If we need them they can be opened now
++               */
++
++      }
++
++      if (itfnum != NULL) {
++              create_pidfile(itfnum);
++              free(itfnum);
++      }
++
++      syslog(LOG_INFO, "RFC 1483/2684 bridge daemon started\n");
++      atexit(exitFunc);
++
++      while (1)
++              sleep(30);      /* to keep the sockets... */
++      return 0;
++}
diff --git a/openwrt/target/linux/generic-2.4/patches/225-atm_br2684.patch b/openwrt/target/linux/generic-2.4/patches/225-atm_br2684.patch
new file mode 100644 (file)
index 0000000..3b01533
--- /dev/null
@@ -0,0 +1,600 @@
+diff -Nur linux.old/net/atm/br2684.c linux.new/net/atm/br2684.c
+--- linux.old/net/atm/br2684.c 2004-08-08 01:26:06.000000000 +0200
++++ linux.new/net/atm/br2684.c 2005-11-13 00:04:15.000000000 +0100
+@@ -16,12 +16,9 @@
+ #include <linux/ip.h>
+ #include <asm/uaccess.h>
+ #include <net/arp.h>
+-#include <linux/atm.h>
+-#include <linux/atmdev.h>
+ #include <linux/atmbr2684.h>
+-#include "common.h"
+ #include "ipcommon.h"
+ /*
+@@ -55,36 +52,57 @@
+ #define skb_debug(skb)        do {} while (0)
+ #endif
++#define       BR2684_LLC_LEN          3
++#define       BR2684_SNAP_LEN         3
++#define       BR2684_ETHERTYPE_LEN    2
++#define       BR2684_PID_LEN          2
++#define       BR2684_PAD_LEN          2
++
++static unsigned char llc_common[] = { 0xaa, 0xaa, 0x03 };
++static unsigned char snap_bridged[] = { 0x00, 0x80, 0xc2 };
++static unsigned char snap_routed[] = { 0x00, 0x00, 0x00 };
++static unsigned char pid_ipv4[] = { 0x00, 0x07 };
++static unsigned char ethertype_ipv4[] = { 0x08, 0x00 };
++static unsigned char ethertype_ipv6[] = { 0x86, 0xdd };
++static unsigned char pad_bridged[] = { 0x00, 0x00 };
++
+ static unsigned char llc_oui_pid_pad[] =
+     { 0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00 };
++static unsigned char llc_oui_ipv6[] =
++    { 0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00, 0x86, 0xdd };
++static unsigned char llc_oui_ipv4[] =
++    { 0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00, 0x08, 0x00 };
+ #define PADLEN        (2)
+ enum br2684_encaps {
+-      e_vc  = BR2684_ENCAPS_VC,
++      e_vc = BR2684_ENCAPS_VC,
+       e_llc = BR2684_ENCAPS_LLC,
+ };
++
++
+ struct br2684_vcc {
+-      struct atm_vcc  *atmvcc;
++      struct atm_vcc *atmvcc;
+       struct br2684_dev *brdev;
+       /* keep old push,pop functions for chaining */
+-      void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
++      void (*old_push) (struct atm_vcc * vcc, struct sk_buff * skb);
+       /* void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb); */
+       enum br2684_encaps encaps;
++      enum br2684_payload payload;
+       struct list_head brvccs;
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+       struct br2684_filter filter;
+-#endif /* CONFIG_ATM_BR2684_IPFILTER */
++#endif                                /* CONFIG_ATM_BR2684_IPFILTER */
+ #ifndef FASTER_VERSION
+       unsigned copies_needed, copies_failed;
+-#endif /* FASTER_VERSION */
++#endif                                /* FASTER_VERSION */
+ };
+ struct br2684_dev {
+       struct net_device net_dev;
+       struct list_head br2684_devs;
+       int number;
+-      struct list_head brvccs; /* one device <=> one vcc (before xmas) */
++      struct list_head brvccs;        /* one device <=> one vcc (before xmas) */
+       struct net_device_stats stats;
+       int mac_was_set;
+ };
+@@ -173,24 +197,84 @@
+               }
+               skb = skb2;
+       }
+-      skb_push(skb, minheadroom);
+-      if (brvcc->encaps == e_llc)
+-              memcpy(skb->data, llc_oui_pid_pad, 10);
+-      else
+-              memset(skb->data, 0, 2);
+-#endif /* FASTER_VERSION */
++
++      /* This skb_push is a problem: routed packets need less headroom than
++       * bridged packets.
++       */
++
++/*    skb_push(skb, minheadroom); */
++      if (brvcc->encaps == e_llc) {
++              int offset = 0;
++              int actual_headroom;
++
++              actual_headroom =
++                  BR2684_LLC_LEN +
++                  BR2684_SNAP_LEN +
++                  ((brvcc->payload == p_bridged) ?
++                   (BR2684_PID_LEN + BR2684_PAD_LEN) :
++                   BR2684_ETHERTYPE_LEN);
++
++              skb_push(skb, actual_headroom);
++              memcpy(skb->data, llc_common, BR2684_LLC_LEN);
++              offset += BR2684_LLC_LEN;
++
++              if (brvcc->payload == p_bridged) {
++                      memcpy(skb->data + offset, snap_bridged,
++                             BR2684_SNAP_LEN);
++                      offset += BR2684_SNAP_LEN;
++                      /* pid_ipv4 is poorly named.  should probably be
++                       * pid_ethernet
++                       */
++                      memcpy(skb->data + offset, pid_ipv4,
++                             BR2684_PID_LEN);
++                      offset += BR2684_PID_LEN;
++                      memcpy(skb->data + offset, pad_bridged,
++                             BR2684_PAD_LEN);
++                      offset += BR2684_PAD_LEN;
++              } else if (brvcc->payload == p_routed) {
++                      unsigned short prot =
++                          __constant_ntohs(skb->protocol);
++                      memcpy(skb->data + offset, snap_routed,
++                             BR2684_SNAP_LEN);
++                      offset += BR2684_SNAP_LEN;
++
++                      switch (prot) {
++                      case ETH_P_IP:
++                              memcpy(skb->data + offset,
++                                     ethertype_ipv4,
++                                     BR2684_ETHERTYPE_LEN);
++                              break;
++                      case ETH_P_IPV6:
++                              memcpy(skb->data + offset,
++                                     ethertype_ipv6,
++                                     BR2684_ETHERTYPE_LEN);
++                              break;
++                      default:
++                              dev_kfree_skb(skb);
++                              return 0;
++                      }
++                      offset += BR2684_ETHERTYPE_LEN;
++
++              }
++      } else {
++              skb_push(skb, 2);
++              if (brvcc->payload == p_bridged)
++                      memset(skb->data, 0, 2);
++      }
++#endif                                /* FASTER_VERSION */
+       skb_debug(skb);
+       ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
+-      DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
++      DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc,
++              atmvcc->dev);
+       if (!atm_may_send(atmvcc, skb->truesize)) {
+               /* we free this here for now, because we cannot know in a higher 
+-                      layer whether the skb point it supplied wasn't freed yet.
+-                      now, it always is.
+-              */
++                 layer whether the skb point it supplied wasn't freed yet.
++                 now, it always is.
++               */
+               dev_kfree_skb(skb);
+               return 0;
+-              }
++      }
+       atomic_add(skb->truesize, &atmvcc->sk->wmem_alloc);
+       ATM_SKB(skb)->atm_options = atmvcc->atm_options;
+       brdev->stats.tx_packets++;
+@@ -428,18 +512,39 @@
+       atm_return(atmvcc, skb->truesize);
+       DPRINTK("skb from brdev %p\n", brdev);
+       if (brvcc->encaps == e_llc) {
++              /* accept packets that have "ipv[46]" in the snap header */
++              /* 8 - 2 == sizeof(llc_oui_ipv6) - BR2684_ETHERTYPE_LEN */
++              if (memcmp(skb->data, llc_oui_ipv6, 8 - 2) == 0) {
++                      plen = sizeof(llc_oui_ipv6);
++
++                      if (memcmp(skb->data + 6, ethertype_ipv6, 2) == 0)
++                              skb->protocol =
++                                  __constant_htons(ETH_P_IPV6);
++                      else if (memcmp(skb->data + 6, ethertype_ipv4, 2)
++                               == 0)
++                              skb->protocol = __constant_htons(ETH_P_IP);
++                      else {
++                              brdev->stats.rx_errors++;
++                              dev_kfree_skb(skb);
++                              return;
++                      }
++                      skb_pull(skb, plen);
++                      skb->nh.raw = skb->data;
++                      skb->pkt_type = PACKET_HOST;
++              }
++
+               /* let us waste some time for checking the encapsulation.
+                  Note, that only 7 char is checked so frames with a valid FCS
+                  are also accepted (but FCS is not checked of course) */
+-              if (memcmp(skb->data, llc_oui_pid_pad, 7)) {
++              else if (memcmp(skb->data, llc_oui_pid_pad, 7) == 0) {
++                      skb_pull(skb, plen - ETH_HLEN);
++                      skb->protocol =
++                          eth_type_trans(skb, &brdev->net_dev);
++              } else {
+                       brdev->stats.rx_errors++;
+                       dev_kfree_skb(skb);
+                       return;
+               }
+-
+-              /* Strip FCS if present */
+-              if (skb->len > 7 && skb->data[7] == 0x01)
+-                      __skb_trim(skb, skb->len - 4);
+       } else {
+               plen = PADLEN + ETH_HLEN;       /* pad, dstmac,srcmac, ethtype */
+               /* first 2 chars should be 0 */
+@@ -448,13 +553,14 @@
+                       dev_kfree_skb(skb);
+                       return;
+               }
++              skb_pull(skb, plen - ETH_HLEN);
++              skb->protocol = eth_type_trans(skb, &brdev->net_dev);
+       }
+       if (skb->len < plen) {
+               brdev->stats.rx_errors++;
+               dev_kfree_skb(skb);     /* dev_ not needed? */
+               return;
+       }
+-
+ #ifdef FASTER_VERSION
+       /* FIXME: tcpdump shows that pointer to mac header is 2 bytes earlier,
+          than should be. What else should I set? */
+@@ -465,30 +571,29 @@
+       skb->protocol = ((u16 *) skb->data)[-1];
+ #else                         /* some protocols might require this: */
+       skb->protocol = br_type_trans(skb, &brdev->net_dev);
+-#endif /* CONFIG_BR2684_FAST_TRANS */
++#endif                                /* CONFIG_BR2684_FAST_TRANS */
+ #else
+-      skb_pull(skb, plen - ETH_HLEN);
+-      skb->protocol = eth_type_trans(skb, &brdev->net_dev);
+-#endif /* FASTER_VERSION */
++      /* skb_pull(skb, plen - ETH_HLEN); */
++      /* skb->protocol = eth_type_trans(skb, &brdev->net_dev); */
++#endif                                /* FASTER_VERSION */
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+       if (packet_fails_filter(skb->protocol, brvcc, skb)) {
+               brdev->stats.rx_dropped++;
+               dev_kfree_skb(skb);
+               return;
+       }
+-#endif /* CONFIG_ATM_BR2684_IPFILTER */
++#endif                                /* CONFIG_ATM_BR2684_IPFILTER */
+       skb->dev = &brdev->net_dev;
+-      ATM_SKB(skb)->vcc = atmvcc;     /* needed ? */
++      /* ATM_SKB(skb)->vcc = atmvcc;  *//* needed ? */
+       DPRINTK("received packet's protocol: %x\n", ntohs(skb->protocol));
+       skb_debug(skb);
+-      if (!(brdev->net_dev.flags & IFF_UP)) { /* sigh, interface is down */
++      if (!(brdev->net_dev.flags & IFF_UP)) { /* sigh, interface is down */
+               brdev->stats.rx_dropped++;
+               dev_kfree_skb(skb);
+               return;
+       }
+       brdev->stats.rx_packets++;
+       brdev->stats.rx_bytes += skb->len;
+-      memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
+       netif_rx(skb);
+ }
+@@ -525,10 +630,10 @@
+               err = -EEXIST;
+               goto error;
+       }
+-      if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO ||
+-          be.fcs_auto || be.has_vpiid || be.send_padding || (be.encaps !=
+-          BR2684_ENCAPS_VC && be.encaps != BR2684_ENCAPS_LLC) ||
+-          be.min_size != 0) {
++      if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO
++          || be.fcs_auto || be.has_vpiid || be.send_padding
++          || (be.encaps != BR2684_ENCAPS_VC
++              && be.encaps != BR2684_ENCAPS_LLC) || be.min_size != 0) {
+               err = -EINVAL;
+               goto error;
+       }
+@@ -554,18 +659,21 @@
+       brvcc->atmvcc = atmvcc;
+       atmvcc->user_back = brvcc;
+       brvcc->encaps = (enum br2684_encaps) be.encaps;
++      brvcc->payload = (enum br2684_payload) be.payload;
+       brvcc->old_push = atmvcc->push;
+       barrier();
+       atmvcc->push = br2684_push;
+       skb_queue_head_init(&copy);
+       skb_migrate(&atmvcc->sk->receive_queue, &copy);
+       while ((skb = skb_dequeue(&copy))) {
++#ifdef notdef
+               BRPRIV(skb->dev)->stats.rx_bytes -= skb->len;
+               BRPRIV(skb->dev)->stats.rx_packets--;
++#endif
+               br2684_push(atmvcc, skb);
+       }
+       return 0;
+-    error:
++      error:
+       write_unlock_irq(&devs_lock);
+       MOD_DEC_USE_COUNT;
+       return err;
+@@ -608,12 +717,25 @@
+       if (ni.ifname[0] != '\0') {
+               memcpy(brdev->net_dev.name, ni.ifname,
+-                  sizeof(brdev->net_dev.name));
+-              brdev->net_dev.name[sizeof(brdev->net_dev.name) - 1] = '\0';
++                     sizeof(brdev->net_dev.name));
++              brdev->net_dev.name[sizeof(brdev->net_dev.name) - 1] =
++                  '\0';
+       } else
+               sprintf(brdev->net_dev.name, "nas%d", brdev->number);
+       DPRINTK("registered netdev %s\n", brdev->net_dev.name);
+-      ether_setup(&brdev->net_dev);
++      if (ni.payload == p_routed) {
++              brdev->net_dev.hard_header_len = 0;
++              brdev->net_dev.addr_len = 0;
++              brdev->net_dev.mtu = 1500;
++
++              /* Type PPP seems most suitable */
++              brdev->net_dev.type = ARPHRD_PPP;
++              brdev->net_dev.flags =
++                  IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
++              brdev->net_dev.tx_queue_len = 100;
++      } else {
++              ether_setup(&brdev->net_dev);
++      }
+       brdev->mac_was_set = 0;
+ #ifdef FASTER_VERSION
+       my_eth_header = brdev->net_dev.hard_header;
+@@ -677,12 +799,11 @@
+               err = br2684_setfilt(atmvcc, arg);
+               MOD_DEC_USE_COUNT;
+               return err;
+-#endif /* CONFIG_ATM_BR2684_IPFILTER */
++#endif                                /* CONFIG_ATM_BR2684_IPFILTER */
+       }
+       return -ENOIOCTLCMD;
+ }
+-#ifdef CONFIG_PROC_FS
+ /* Never put more than 256 bytes in at once */
+ static int br2684_proc_engine(loff_t pos, char *buf)
+ {
+@@ -692,52 +813,62 @@
+       list_for_each(lhd, &br2684_devs) {
+               brdev = list_entry_brdev(lhd);
+               if (pos-- == 0)
+-                      return sprintf(buf, "dev %.16s: num=%d, mac=%02X:%02X:"
+-                          "%02X:%02X:%02X:%02X (%s)\n", brdev->net_dev.name,
+-                          brdev->number,
+-                          brdev->net_dev.dev_addr[0],
+-                          brdev->net_dev.dev_addr[1],
+-                          brdev->net_dev.dev_addr[2],
+-                          brdev->net_dev.dev_addr[3],
+-                          brdev->net_dev.dev_addr[4],
+-                          brdev->net_dev.dev_addr[5],
+-                          brdev->mac_was_set ? "set" : "auto");
++                      return sprintf(buf,
++                                     "dev %.16s: num=%d, mac=%02X:%02X:"
++                                     "%02X:%02X:%02X:%02X (%s)\n",
++                                     brdev->net_dev.name, brdev->number,
++                                     brdev->net_dev.dev_addr[0],
++                                     brdev->net_dev.dev_addr[1],
++                                     brdev->net_dev.dev_addr[2],
++                                     brdev->net_dev.dev_addr[3],
++                                     brdev->net_dev.dev_addr[4],
++                                     brdev->net_dev.dev_addr[5],
++                                     brdev->
++                                     mac_was_set ? "set" : "auto");
+               list_for_each(lhc, &brdev->brvccs) {
+                       brvcc = list_entry_brvcc(lhc);
+                       if (pos-- == 0)
+-                              return sprintf(buf, "  vcc %d.%d.%d: encaps=%s"
++                              return sprintf(buf,
++                                             "  vcc %d.%d.%d: encaps=%s"
++                                             ", payload=%s"
+ #ifndef FASTER_VERSION
+-                                  ", failed copies %u/%u"
+-#endif /* FASTER_VERSION */
+-                                  "\n", brvcc->atmvcc->dev->number,
+-                                  brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
+-                                  (brvcc->encaps == e_llc) ? "LLC" : "VC"
++                                             ", failed copies %u/%u"
++#endif                                /* FASTER_VERSION */
++                                             "\n",
++                                             brvcc->atmvcc->dev->number,
++                                             brvcc->atmvcc->vpi,
++                                             brvcc->atmvcc->vci,
++                                             (brvcc->encaps ==
++                                              e_llc) ? "LLC" : "VC",
++                                             (brvcc->payload ==
++                                              p_bridged) ? "bridged" :
++                                             "routed"
+ #ifndef FASTER_VERSION
+-                                  , brvcc->copies_failed
+-                                  , brvcc->copies_needed
+-#endif /* FASTER_VERSION */
++                                             , brvcc->copies_failed,
++                                             brvcc->copies_needed
++#endif                                /* FASTER_VERSION */
+                                   );
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+ #define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
+ #define bs(var)               b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
+                       if (brvcc->filter.netmask != 0 && pos-- == 0)
+-                              return sprintf(buf, "    filter=%d.%d.%d.%d/"
+-                                  "%d.%d.%d.%d\n", bs(prefix), bs(netmask));
++                              return sprintf(buf,
++                                             "    filter=%d.%d.%d.%d/"
++                                             "%d.%d.%d.%d\n", bs(prefix),
++                                             bs(netmask));
+ #undef bs
+ #undef b1
+-#endif /* CONFIG_ATM_BR2684_IPFILTER */
++#endif                                /* CONFIG_ATM_BR2684_IPFILTER */
+               }
+       }
+       return 0;
+ }
+ static ssize_t br2684_proc_read(struct file *file, char *buf, size_t count,
+-      loff_t *pos)
++                              loff_t * pos)
+ {
+       unsigned long page;
+       int len = 0, x, left;
+-      loff_t n = *pos;
+-
+       page = get_free_page(GFP_KERNEL);
+       if (!page)
+               return -ENOMEM;
+@@ -746,7 +877,7 @@
+               left = count;
+       read_lock(&devs_lock);
+       for (;;) {
+-              x = br2684_proc_engine(n, &((char *) page)[len]);
++              x = br2684_proc_engine(*pos, &((char *) page)[len]);
+               if (x == 0)
+                       break;
+               if (x > left)
+@@ -761,12 +892,11 @@
+               }
+               len += x;
+               left -= x;
+-              n++;
++              (*pos)++;
+               if (left < 256)
+                       break;
+       }
+       read_unlock(&devs_lock);
+-      *pos = n;
+       if (len > 0 && copy_to_user(buf, (char *) page, len))
+               len = -EFAULT;
+       free_page(page);
+@@ -774,34 +904,32 @@
+ }
+ static struct file_operations br2684_proc_operations = {
+-      read: br2684_proc_read,
++      read:br2684_proc_read,
+ };
+ extern struct proc_dir_entry *atm_proc_root;  /* from proc.c */
+-#endif /* CONFIG_PROC_FS */
++
++extern int (*br2684_ioctl_hook) (struct atm_vcc *, unsigned int,
++                               unsigned long);
+ /* the following avoids some spurious warnings from the compiler */
+ #define UNUSED __attribute__((unused))
+ static int __init UNUSED br2684_init(void)
+ {
+-#ifdef CONFIG_PROC_FS
+       struct proc_dir_entry *p;
+       if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
+               return -ENOMEM;
+       p->proc_fops = &br2684_proc_operations;
+-#endif /* CONFIG_PROC_FS */
+-      br2684_ioctl_set(br2684_ioctl);
++      br2684_ioctl_hook = br2684_ioctl;
+       return 0;
+ }
+ static void __exit UNUSED br2684_exit(void)
+ {
+       struct br2684_dev *brdev;
+-      br2684_ioctl_set(NULL);
+-#ifdef CONFIG_PROC_FS
++      br2684_ioctl_hook = NULL;
+       remove_proc_entry("br2684", atm_proc_root);
+-#endif /* CONFIG_PROC_FS */
+       while (!list_empty(&br2684_devs)) {
+               brdev = list_entry_brdev(br2684_devs.next);
+               unregister_netdev(&brdev->net_dev);
+diff -Nur linux.old/net/atm/common.c linux.new/net/atm/common.c
+--- linux.old/net/atm/common.c 2004-02-18 14:36:32.000000000 +0100
++++ linux.new/net/atm/common.c 2005-11-13 00:46:11.000000000 +0100
+@@ -158,6 +158,7 @@
+ }
+ #ifdef CONFIG_ATM_BR2684_MODULE
+ EXPORT_SYMBOL(br2684_ioctl_set);
++EXPORT_SYMBOL(br2684_ioctl_hook);
+ #endif
+ #endif
+
+diff -Nur linux.old/include/linux/atmbr2684.h linux.new/include/linux/atmbr2684.h
+--- linux.old/include/linux/atmbr2684.h        2005-11-13 00:28:19.000000000 +0100
++++ linux.new/include/linux/atmbr2684.h        2005-11-13 00:06:42.000000000 +0100
+@@ -3,6 +3,7 @@
+ #include <linux/atm.h>
+ #include <linux/if.h>         /* For IFNAMSIZ */
++#include <linux/if_ether.h>   /* ETH_P_* */
+ /*
+  * Type of media we're bridging (ethernet, token ring, etc)  Currently only
+@@ -36,15 +37,24 @@
+ #define BR2684_ENCAPS_AUTODETECT (2)  /* Unsuported */
+ /*
++ * Is this VC bridged or routed?
++ */
++
++#define       BR2684_PAYLOAD_ROUTED   (0)
++#define       BR2684_PAYLOAD_BRIDGED  (1)
++
++
++/*
+  * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+  * the first element of the structure is the backend number and the rest
+  * is per-backend specific
+  */
+ struct atm_newif_br2684 {
+-      atm_backend_t   backend_num;    /* ATM_BACKEND_BR2684 */
+-      int             media;          /* BR2684_MEDIA_* */
+-      char            ifname[IFNAMSIZ];
+-      int             mtu;
++      atm_backend_t backend_num;      /* ATM_BACKEND_BR2684 */
++      int media;              /* BR2684_MEDIA_* */
++      char ifname[IFNAMSIZ];
++      int mtu;
++      int payload;            /* bridged or routed */
+ };
+ /*
+@@ -68,16 +78,17 @@
+  * is per-backend specific
+  */
+ struct atm_backend_br2684 {
+-      atm_backend_t   backend_num;    /* ATM_BACKEND_BR2684 */
++      atm_backend_t backend_num;      /* ATM_BACKEND_BR2684 */
+       struct br2684_if_spec ifspec;
+-      int     fcs_in;         /* BR2684_FCSIN_* */
+-      int     fcs_out;        /* BR2684_FCSOUT_* */
+-      int     fcs_auto;       /* 1: fcs_{in,out} disabled if no FCS rx'ed */
+-      int     encaps;         /* BR2684_ENCAPS_* */
+-      int     has_vpiid;      /* 1: use vpn_id - Unsupported */
+-      __u8    vpn_id[7];
+-      int     send_padding;   /* unsupported */
+-      int     min_size;       /* we will pad smaller packets than this */
++      int fcs_in;             /* BR2684_FCSIN_* */
++      int fcs_out;            /* BR2684_FCSOUT_* */
++      int fcs_auto;           /* 1: fcs_{in,out} disabled if no FCS rx'ed */
++      int encaps;             /* BR2684_ENCAPS_* */
++      int payload;            /* BR2684_PAYLOAD_* */
++      int has_vpiid;          /* 1: use vpn_id - Unsupported */
++      __u8 vpn_id[7];
++      int send_padding;       /* unsupported */
++      int min_size;           /* we will pad smaller packets than this */
+ };
+ /*
+@@ -95,7 +106,12 @@
+       struct br2684_filter filter;
+ };
++enum br2684_payload {
++      p_routed = BR2684_PAYLOAD_ROUTED,
++      p_bridged = BR2684_PAYLOAD_BRIDGED,
++};
++
+ #define BR2684_SETFILT        _IOW( 'a', ATMIOC_BACKEND + 0, \
+                               struct br2684_filter_set)
+-#endif /* _LINUX_ATMBR2684_H */
++#endif                                /* _LINUX_ATMBR2684_H */
index f5ad6cc66092d060b5e60841b271bd06863d96a0..0b7378785483cc0836a368c90fbab1308b0cf166 100644 (file)
@@ -27,6 +27,15 @@ $(PKG_BUILD_DIR)/ld.script: src/ld.script.in
        sed -e 's/@@OUTPUT_FORMAT@@/$(OUTPUT_FORMAT)/' \
            -e 's/@@LOADADDR@@/$(LOADADDR)/' <$< >$@
 
+$(PKG_BUILD_DIR)/cksum.o: $(PKG_BUILD_DIR)/cksum.c
+       $(HOSTCC) -o $@ $<
+
+$(PKG_BUILD_DIR)/ckmain.o: $(PKG_BUILD_DIR)/ckmain.c
+       $(HOSTCC) -o $@ $<
+
+$(PKG_BUILD_DIR)/tichksum: $(PKG_BUILD_DIR)/ckmain.o $(PKG_BUILD_DIR)/cksum.o
+       $(HOSTCC) -o $@ $<
+
 $(PKG_BUILD_DIR)/LzmaDecode.o: src/LzmaDecode.c
        $(TARGET_CC) $(CFLAGS) -c -o $@ $<