arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
authorJagan Teki <jagan@amarulasolutions.com>
Fri, 12 Apr 2019 10:49:34 +0000 (16:19 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Wed, 17 Apr 2019 09:04:45 +0000 (14:34 +0530)
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
33 files changed:
arch/arm/dts/sun7i-a20-ainol-aw1.dts
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
arch/arm/dts/sun7i-a20-bananapi.dts
arch/arm/dts/sun7i-a20-bananapro.dts
arch/arm/dts/sun7i-a20-cubieboard2.dts
arch/arm/dts/sun7i-a20-cubietruck.dts
arch/arm/dts/sun7i-a20-hummingbird.dts
arch/arm/dts/sun7i-a20-i12-tvbox.dts
arch/arm/dts/sun7i-a20-icnova-swac.dts
arch/arm/dts/sun7i-a20-itead-ibox.dts
arch/arm/dts/sun7i-a20-lamobo-r1.dts
arch/arm/dts/sun7i-a20-m3.dts
arch/arm/dts/sun7i-a20-m5.dts
arch/arm/dts/sun7i-a20-mk808c.dts
arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts [new file with mode: 0644]
arch/arm/dts/sun7i-a20-olimex-som-evb.dts
arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
arch/arm/dts/sun7i-a20-olinuxino-lime.dts
arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts
arch/arm/dts/sun7i-a20-olinuxino-micro.dts
arch/arm/dts/sun7i-a20-orangepi-mini.dts
arch/arm/dts/sun7i-a20-orangepi.dts
arch/arm/dts/sun7i-a20-pcduino3-nano.dts
arch/arm/dts/sun7i-a20-pcduino3.dts
arch/arm/dts/sun7i-a20-primo73.dts
arch/arm/dts/sun7i-a20-wexler-tab7200.dts
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts
arch/arm/dts/sun7i-a20.dtsi
arch/arm/dts/sunxi-itead-core-common.dtsi

index 57fe0066cb4f4efdd38aa42e13c282eb738735e4..5914c919d4a97c725f41ae5e6d42539fa8fd3562 100644 (file)
@@ -23,6 +23,6 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
index 763cb03033c46f5d380d2cdb897606b0ffafe937..e2bfe0058830fd12c14cf0b033871ba35f390d21 100644 (file)
@@ -73,8 +73,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_bpi_m1p>;
 
                green {
                        label = "bananapi-m1-plus:green:usr";
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
                reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
        };
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 &mmc3 {
        #address-cells = <1>;
        #size-cells = <0>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 requires pull-up */
-       bias-pull-up;
-};
-
 &ohci0 {
        status = "okay";
 };
        status = "okay";
 };
 
-&pio {
-       gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_bpi_m1p: led_pins@0 {
-               pins = "PH24", "PH25";
-               function = "gpio_out";
-       };
-
-       mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
-               pins = "PH22";
-               function = "gpio_out";
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 70dfc4ac0bb5fb7607dab5cf3f891d3c345b02fc..81bc85d398c155573b128af188673a762591fba9 100644 (file)
@@ -76,8 +76,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_bananapi>;
 
                green {
                        label = "bananapi:green:usr";
@@ -87,8 +85,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_bananapi>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 };
 
 &pio {
+       vcc-pa-supply = <&reg_vcc3v3>;
+       vcc-pc-supply = <&reg_vcc3v3>;
+       vcc-pe-supply = <&reg_vcc3v3>;
+       vcc-pf-supply = <&reg_vcc3v3>;
+       vcc-pg-supply = <&reg_vcc3v3>;
        gpio-line-names =
                /* PA */
                "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
                "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
                "", "", "", "", "", "", "", "";
 
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       gmac_power_pin_bananapi: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_bananapi: led_pins@0 {
-               pins = "PH24";
-               function = "gpio_out";
-       };
 };
 
 #include "axp209.dtsi"
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>,
-                   <&spi0_cs1_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>,
+                   <&spi0_cs1_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart3 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins_b>;
+       pinctrl-0 = <&uart3_ph_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
index 0898eb6162f59b8613f9573250762f6d2b3e5c39..0176e9de018033201cbf04b735d48a5530e9b22e 100644 (file)
@@ -62,8 +62,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_bananapro>;
 
                blue {
                        label = "bananapro:blue:usr";
 
        wifi_pwrseq: wifi-pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_bananapro>;
                reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
        };
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_bananapro>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&wifi_pwrseq>;
        bus-width = <4>;
        status = "okay";
 };
 
-&pio {
-       gmac_power_pin_bananapro: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_bananapro: led_pins@0 {
-               pins = "PH24", "PG2";
-               function = "gpio_out";
-       };
-
-       mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-               pins = "PH0";
-               function = "gpio_out";
-       };
-
-       usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-               pins = "PH1";
-               function = "gpio_out";
-       };
-
-       vmmc3_pin_bananapro: vmmc3_pin@0 {
-               pins = "PH22";
-               function = "gpio_out";
-       };
-};
-
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_bananapro>;
        gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
        status = "okay";
 };
 
 &reg_usb2_vbus {
-       pinctrl-0 = <&usb2_vbus_pin_bananapro>;
        gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
        status = "okay";
 };
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>,
-                   <&spi0_cs1_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>,
+                   <&spi0_cs1_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart4 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart4_pins_b>;
+       pinctrl-0 = <&uart4_ph_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
index 942ac9dfd4a5a7a45f369fbe6854c07f3dc56dfa..200685b0b1cb2ae30ccf06f81ca7cd0e8eb787f2 100644 (file)
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_cubieboard2>;
 
                blue {
                        label = "cubieboard2:blue:usr";
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       led_pins_cubieboard2: led_pins@0 {
-               pins = "PH20", "PH21";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 5649161de1d7235872ab44f6a1da33ac01a0522d..99f531b8d2a78a2676bd34812e4a1127d214394e 100644 (file)
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_cubietruck>;
 
                blue {
                        label = "cubietruck:blue:usr";
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
                reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "ext_clock";
        };
 
        sound {
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &i2c1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 requires pull-up */
-       bias-pull-up;
-};
-
 &ohci0 {
        status = "okay";
 };
 };
 
 &pio {
-       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-               pins = "PH12";
-               function = "gpio_out";
-       };
-
-       led_pins_cubietruck: led_pins@0 {
-               pins = "PH7", "PH11", "PH20", "PH21";
-               function = "gpio_out";
-       };
-
-       mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
-               pins = "PH9";
-               function = "gpio_out";
-       };
-
-       usb0_vbus_pin_a: usb0_vbus_pin@0 {
-               pins = "PH17";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               pins = "PH19";
-               function = "gpio_in";
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               pins = "PH22";
-               function = "gpio_in";
-       };
+       /* Pin outputs low power clock for WiFi and BT */
+       pinctrl-0 = <&clk_out_a_pin>;
+       pinctrl-names = "default";
 };
 
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+       pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
        status = "okay";
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
        gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 };
 
 &reg_usb0_vbus {
-       pinctrl-0 = <&usb0_vbus_pin_a>;
        gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
 &spdif {
        pinctrl-names = "default";
-       pinctrl-0 = <&spdif_tx_pins_a>;
+       pinctrl-0 = <&spdif_tx_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+       uart-has-rtscts;
        status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm20702a1";
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+               host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+               shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+               max-speed = <1500000>;
+       };
 };
 
 &usb_otg {
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        usb0_vbus_power-supply = <&usb_power_supply>;
index 1f0e5ecbf0c489adddd969630dbcb706ae6937f8..fd0153f65685618edacc77875d49fb558e3f9f4e 100644 (file)
@@ -67,8 +67,6 @@
 
        reg_mmc3_vdd: mmc3_vdd {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
                regulator-name = "mmc3_vdd";
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
@@ -78,8 +76,6 @@
 
        reg_gmac_vdd: gmac_vdd {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
                regulator-name = "gmac_vdd";
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_vdd>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &i2c3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c3_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v0>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_mmc3_vdd>;
        bus-width = <4>;
        non-removable;
        status = "okay";
 };
 
-&pio {
-       ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
-               pins = "PH15";
-               function = "gpio_out";
-       };
-
-       usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
-               pins = "PH2";
-               function = "gpio_out";
-       };
-
-       mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
-               pins = "PH9";
-               function = "gpio_out";
-       };
-
-       gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
-               pins = "PH16";
-               function = "gpio_out";
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>;
+       pinctrl-0 = <&pwm0_pin>;
        status = "okay";
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
        gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
        status = "okay";
 };
 
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
        gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
        status = "okay";
 };
 
 &spi2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi2_pins_b>,
-                   <&spi2_cs0_pins_b>;
+       pinctrl-0 = <&spi2_pb_pins>,
+                   <&spi2_cs0_pb_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins_a>;
+       pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
        status = "okay";
 };
 
 &uart3 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins_a>;
+       pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
        status = "okay";
 };
 
 &uart4 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart4_pins_a>;
+       pinctrl-0 = <&uart4_pg_pins>;
        status = "okay";
 };
 
 &uart5 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart5_pins_a>;
+       pinctrl-0 = <&uart5_pi_pins>;
        status = "okay";
 };
 
index 2e3f2f29d124a036c9d45a15707bf460e1ade81a..5f1c4f573d3eac3cbb3c900014119b97a629a78f 100644 (file)
@@ -61,8 +61,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_i12_tvbox>;
 
                red {
                        label = "i12_tvbox:red:usr";
@@ -77,8 +75,6 @@
 
        reg_vmmc3: vmmc3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
                regulator-name = "vmmc3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -88,8 +84,6 @@
 
        reg_vmmc3_io: vmmc3-io {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
                regulator-name = "vmmc3-io";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vmmc3>;
        bus-width = <4>;
        non-removable;
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 / AP6330 requires pull-up */
-       bias-pull-up;
-};
-
 &ohci0 {
        status = "okay";
 };
        status = "okay";
 };
 
-&pio {
-       vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-               pins = "PH2";
-               function = "gpio_out";
-       };
-
-       vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-               pins = "PH12";
-               function = "gpio_out";
-       };
-
-       gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-               pins = "PH21";
-               function = "gpio_out";
-       };
-
-       led_pins_i12_tvbox: led_pins@0 {
-               pins = "PH9", "PH20";
-               function = "gpio_out";
-       };
-};
-
 &reg_usb1_vbus {
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 926fa194eb1b417b46f278f479b3ed871992e4bf..949494730aee9cfba54624b0cd6b7985481dcef8 100644 (file)
@@ -74,7 +74,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
@@ -85,8 +85,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 1b05ba466e7d94253d57e333376ee0d6f8feb857..b90a7607d0699514738ae04bb43f72c1e92b60cd 100644 (file)
@@ -96,7 +96,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       led_pins_itead_core: led_pins@0 {
+       led_pins_itead_core: led-pins {
                pins = "PH20","PH21";
                function = "gpio_out";
                drive-strength = <20>;
 
 &spdif {
        pinctrl-names = "default";
-       pinctrl-0 = <&spdif_tx_pins_a>;
+       pinctrl-0 = <&spdif_tx_pin>;
        status = "okay";
 };
index b1ab7c1c33e32938597756bda3cdca4eb10d673a..f91e1bee44e8c3454d5214f72df87726adfb91a4 100644 (file)
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_lamobo_r1>;
 
                green {
                        label = "lamobo_r1:green:usr";
@@ -85,8 +83,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
        status = "okay";
+       /delete-property/#address-cells;
+       /delete-property/#size-cells;
 
        fixed-link {
                speed = <1000>;
                switch: ethernet-switch@1e {
                        compatible = "brcm,bcm53125";
                        reg = <30>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
 
                        ports {
                                #address-cells = <1>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_lamobo_r1: led_pins@0 {
-               pins = "PH24";
-               function = "gpio_out";
-       };
 };
 
 #include "axp209.dtsi"
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>,
-                   <&spi0_cs1_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>,
+                   <&spi0_cs1_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart3 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins_b>;
+       pinctrl-0 = <&uart3_ph_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
index e91a209850bc58d74462d74ee302b1d67f5a5d28..b8a1aaaf3976527d6bea57966a60f5b3868132a6 100644 (file)
@@ -63,8 +63,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_m3>;
 
                blue {
                        label = "m3:blue:usr";
@@ -83,7 +81,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
@@ -94,8 +92,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        non-removable;
        status = "okay";
 };
 
-&pio {
-       led_pins_m3: led_pins@0 {
-               pins = "PH20";
-               function = "gpio_out";
-       };
-};
-
 &reg_usb1_vbus {
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 00c3ffd32388f3a8c1d07dab64750ea8101e0746..65930cc6eea5a9eba618e553daed0a9e21494887 100644 (file)
@@ -31,7 +31,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
@@ -51,6 +51,6 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
index 6109f794a9c1007278eeda4e5769029e1cd46c56..1491c603f6614725bb5f8553a1bb731a88e5faaa 100644 (file)
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v0>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               pins = "PH4";
-               function = "gpio_in";
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               pins = "PH5";
-               function = "gpio_in";
-       };
-};
-
 &reg_usb0_vbus {
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins_a>;
+       pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
        status = "okay";
 };
 
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
        usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
        usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644 (file)
index 0000000..20bf09b
--- /dev/null
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+       model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+       compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+       mmc2_pwrseq: mmc2_pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&mmc2 {
+       vmmc-supply = <&reg_vcc3v3>;
+       mmc-pwrseq = <&mmc2_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       emmc: emmc@0 {
+               reg = <0>;
+               compatible = "mmc-card";
+               broken-hpi;
+       };
+};
index f080f82b58efdf65314aed7d0c622b999868087d..f0e6a96e5785bcd1f1721a97ba15bf9667be4f97 100644 (file)
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_olimex_som_evb>;
 
                green {
                        label = "a20-olimex-som-evb:green:usr";
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
        vref-supply = <&reg_vcc3v0>;
        status = "okay";
 
-       button@190 {
+       button-190 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
                voltage = <190000>;
        };
 
-       button@390 {
+       button-390 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
                voltage = <390000>;
        };
 
-       button@600 {
+       button-600 {
                label = "Menu";
                linux,code = <KEY_MENU>;
                channel = <0>;
                voltage = <600000>;
        };
 
-       button@800 {
+       button-800 {
                label = "Search";
                linux,code = <KEY_SEARCH>;
                channel = <0>;
                voltage = <800000>;
        };
 
-       button@980 {
+       button-980 {
                label = "Home";
                linux,code = <KEY_HOMEPAGE>;
                channel = <0>;
                voltage = <980000>;
        };
 
-       button@1180 {
+       button-1180 {
                label = "Esc";
                linux,code = <KEY_ESC>;
                channel = <0>;
                voltage = <1180000>;
        };
 
-       button@1400 {
+       button-1400 {
                label = "Enter";
                linux,code = <KEY_ENTER>;
                channel = <0>;
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
 };
 
 &pio {
-       ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
-               pins = "PC3";
-               function = "gpio_out";
-       };
-
-       led_pins_olimex_som_evb: led_pins@0 {
+       led_pins_olimex_som_evb: led-pins {
                pins = "PH2";
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
-               pins = "PH0";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               pins = "PH4";
-               function = "gpio_in";
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               pins = "PH5";
-               function = "gpio_in";
-       };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
 &spi1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi1_pins_a>,
-                   <&spi1_cs0_pins_a>;
+       pinctrl-0 = <&spi1_pi_pins>,
+                   <&spi1_cs0_pi_pin>;
        status = "okay";
 };
 
 &spi2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi2_pins_a>,
-                   <&spi2_cs0_pins_a>;
+       pinctrl-0 = <&spi2_pc_pins>,
+                   <&spi2_cs0_pc_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart6 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart6_pins_a>;
+       pinctrl-0 = <&uart6_pi_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
        usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
        usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
index c56620a8fb20f7bfbdb4fd21fb33355c7780b039..a59755a2e7a9db9e2fa8baf06f18571663da78ad 100644 (file)
@@ -20,8 +20,6 @@
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc2_pwrseq>;
        bus-width = <4>;
index 3d7b5c848fefe5940aed9e3b68d32f6a28543ade..823aabce046253fac96dbd92e96771a7c0e40d74 100644 (file)
@@ -78,7 +78,7 @@
 
 &can0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&can0_pins_a>;
+       pinctrl-0 = <&can_ph_pins>;
        status = "okay";
 };
 
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy3>;
        phy-mode = "rgmii";
        phy-supply = <&reg_vcc3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 /* Exposed to UEXT1 */
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        eeprom: eeprom@50 {
 
 /* Exposed to UEXT2 */
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&rtl_pwrseq>;
        bus-width = <4>;
 };
 
 &pio {
-       bt_uart_pins: bt_uart_pins@0 {
-               pins = "PG6", "PG7", "PG8";
+       uart3_rts_pin: uart3-rts-pin {
+               pins = "PG8";
                function = "uart3";
        };
 };
 /* Exposed to UEXT1 */
 &spi1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi1_pins_a>,
-                   <&spi1_cs0_pins_a>;
+       pinctrl-0 = <&spi1_pi_pins>,
+                   <&spi1_cs0_pi_pin>;
        status = "okay";
 };
 
 /* Exposed to UEXT2 */
 &spi2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi2_pins_a>,
-                   <&spi2_cs0_pins_a>;
+       pinctrl-0 = <&spi2_pc_pins>,
+                   <&spi2_cs0_pc_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 /* Used for RTL8723BS bluetooth */
 &uart3 {
        pinctrl-names = "default";
-       pinctrl-0 = <&bt_uart_pins>;
+       pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
        status = "okay";
 };
 
 /* Exposed to UEXT1 */
 &uart4 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart4_pins_a>;
+       pinctrl-0 = <&uart4_pg_pins>;
        status = "okay";
 };
 
 /* Exposed to UEXT2 */
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
index d20fd03596e9389e948eddb291d141de40d5f522..5e411194bf62bbd876176c2e30ecbeea128d82b4 100644 (file)
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        eeprom: eeprom@50 {
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               pins = "PC3";
-               function = "gpio_out";
-       };
-
-       led_pins_olinuxinolime: led_pins@0 {
+       led_pins_olinuxinolime: led-pins {
                pins = "PH2";
                function = "gpio_out";
                drive-strength = <20>;
        };
 
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
                pins = "PH5";
                function = "gpio_in";
                bias-pull-down;
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 81f376f2a44d17eec47200b56bb08a62839ac193..decb014a382b8b7f8ca6140b01e52693e6aa6599 100644 (file)
        compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
 
        mmc2_pwrseq: pwrseq {
-               pinctrl-0 = <&mmc2_pins_nrst>;
-               pinctrl-names = "default";
                compatible = "mmc-pwrseq-emmc";
                reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
        };
 };
 
-&pio {
-       mmc2_pins_nrst: mmc2-rst-pin {
-               pins = "PC16";
-               function = "gpio_out";
-       };
-};
-
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        vqmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
index b828677f331d5d6c89763d3e5a76d1779bd583af..4e1c590eb09821bb7827029c203542e9e4e1eed1 100644 (file)
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        eeprom: eeprom@50 {
        };
 };
 
+&lradc {
+       vref-supply = <&reg_vcc3v0>;
+};
+
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               pins = "PC3";
-               function = "gpio_out";
-       };
-
-       led_pins_olinuxinolime: led_pins@0 {
+       led_pins_olinuxinolime: led-pins {
                pins = "PH2";
                function = "gpio_out";
                drive-strength = <20>;
        };
 
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
                pins = "PH5";
                function = "gpio_in";
                bias-pull-down;
        };
-
-       usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
-               pins = "PC17";
-               function = "gpio_out";
-       };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <2800000>;
        regulator-name = "vddio-csi0";
+       regulator-soft-start;
+       regulator-ramp-delay = <1600>;
 };
 
 &reg_ldo4 {
 };
 
 &reg_usb0_vbus {
-       pinctrl-0 = <&usb0_vbus_pin_lime2>;
        gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index d99e7b193efe39550f1b4a18f39bb7d8521c68f6..2337b44a88aa18de9fbd8657624f10294dd7c901 100644 (file)
@@ -54,8 +54,6 @@
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        non-removable;
index 866d230593be407dc9b3f5d28f66a732b1b03f18..840ae1194a66d90bc71f098466ea06a03f95de4a 100644 (file)
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
+       pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        eeprom: eeprom@50 {
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
        vref-supply = <&reg_vcc3v0>;
        status = "okay";
 
-       button@191 {
+       button-191 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
                voltage = <191274>;
        };
 
-       button@392 {
+       button-392 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
                voltage = <392644>;
        };
 
-       button@601 {
+       button-601 {
                label = "Menu";
                linux,code = <KEY_MENU>;
                channel = <0>;
                voltage = <601151>;
        };
 
-       button@795 {
+       button-795 {
                label = "Search";
                linux,code = <KEY_SEARCH>;
                channel = <0>;
                voltage = <795090>;
        };
 
-       button@987 {
+       button-987 {
                label = "Home";
                linux,code = <KEY_HOMEPAGE>;
                channel = <0>;
                voltage = <987387>;
        };
 
-       button@1184 {
+       button-1184 {
                label = "Esc";
                linux,code = <KEY_ESC>;
                channel = <0>;
                voltage = <1184678>;
        };
 
-       button@1398 {
+       button-1398 {
                label = "Enter";
                linux,code = <KEY_ENTER>;
                channel = <0>;
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
 };
 
 &pio {
-       gmac_txerr: gmac_txerr@0 {
+       gmac_txerr: gmac-txerr-pin {
                pins = "PA17";
                function = "gmac";
        };
 
-       mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-               pins = "PH11";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       led_pins_olinuxino: led_pins@0 {
+       led_pins_olinuxino: led-pins {
                pins = "PH2";
                function = "gpio_out";
                drive-strength = <20>;
        };
 
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
                pins = "PH5";
                function = "gpio_in";
                bias-pull-down;
 
 &spi1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi1_pins_a>,
-                   <&spi1_cs0_pins_a>;
+       pinctrl-0 = <&spi1_pi_pins>,
+                   <&spi1_cs0_pi_pin>;
        status = "okay";
 };
 
 &spi2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi2_pins_a>,
-                   <&spi2_cs0_pins_a>;
+       pinctrl-0 = <&spi2_pc_pins>,
+                   <&spi2_cs0_pc_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart6 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart6_pins_a>;
+       pinctrl-0 = <&uart6_pi_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
index f5c7178eb0635a49c84f6b459608c53db634d1ef..15881081cac403375ab643ca7594d4ccbf9b3a5b 100644 (file)
@@ -74,8 +74,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_orangepi>;
 
                green {
                        label = "orangepi:green:usr";
@@ -90,8 +88,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_orangepi>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
-               pins = "PH11";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-               pins = "PH22";
-               function = "gpio_out";
-       };
-
-       gmac_power_pin_orangepi: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_orangepi: led_pins@0 {
-               pins = "PH24", "PH25";
-               function = "gpio_out";
-       };
-
-       usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-               pins = "PH26";
-               function = "gpio_out";
-       };
 };
 
 &reg_dcdc2 {
 };
 
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_bananapro>;
        gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
        status = "okay";
 };
 
 &reg_usb2_vbus {
-       pinctrl-0 = <&usb2_vbus_pin_bananapro>;
        gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 7a4244e575893daf46aa5ce53e1ddcabb8bb1ba9..d64de2e73a9f5cfcf0126b973660cb82e8f51c59 100644 (file)
@@ -63,8 +63,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_orangepi>;
 
                green {
                        label = "orangepi:green:usr";
@@ -74,8 +72,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_orangepi>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -99,7 +95,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-               pins = "PH10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-               pins = "PH22";
-               function = "gpio_out";
-       };
-
-       gmac_power_pin_orangepi: gmac_power_pin@0 {
-               pins = "PH23";
-               function = "gpio_out";
-       };
-
-       led_pins_orangepi: led_pins@0 {
-               pins = "PH24";
-               function = "gpio_out";
-       };
-
-       usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-               pins = "PH26";
-               function = "gpio_out";
-       };
 };
 
 &reg_dcdc2 {
 };
 
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_bananapro>;
        gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
        status = "okay";
 };
 
 &reg_usb2_vbus {
-       pinctrl-0 = <&usb2_vbus_pin_bananapro>;
        gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index bfca960b03e03e9e7991b77f1bb9aeb89d8d0f22..538ea15fa32fe981eb5be25727ac82a6babdb3e5 100644 (file)
@@ -71,8 +71,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_pcduino3_nano>;
 
                /* Marked "LED3" on the PCB. */
                usr1 {
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
-               pins = "PH2";
-               function = "gpio_out";
-       };
-
-       led_pins_pcduino3_nano: led_pins@0 {
-               pins = "PH16", "PH15";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-               pins = "PD2";
-               function = "gpio_out";
-       };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
        gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
        status = "okay";
 };
 
 /* A single regulator (U24) powers both USB host ports. */
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
        gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index c576f101fbdef366b893873f01c8cd5bd2bb32fb..a72ed4318d044fc3bc844010777118d6921adf7e 100644 (file)
@@ -63,8 +63,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_pcduino3>;
 
                tx {
                        label = "pcduino3:green:tx";
                };
        };
 
-       gpio_keys {
+       gpio-keys {
                compatible = "gpio-keys";
-               pinctrl-names = "default";
-               pinctrl-0 = <&key_pins_pcduino3>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-               button@0 {
+
+               back {
                        label = "Key Back";
                        linux,code = <KEY_BACK>;
                        gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
                };
-               button@1 {
+
+               home {
                        label = "Key Home";
                        linux,code = <KEY_HOME>;
                        gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
                };
-               button@2 {
+
+               menu {
                        label = "Key Menu";
                        linux,code = <KEY_MENU>;
                        gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       led_pins_pcduino3: led_pins@0 {
-               pins = "PH15", "PH16";
-               function = "gpio_out";
-       };
-
-       key_pins_pcduino3: key_pins@0 {
-               pins = "PH17", "PH18", "PH19";
-               function = "gpio_in";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index b7294e0348cc7a9b767088b8023d7053b854a8bb..ac0175f79547068f8c941e7cfe144ecf2f158717 100644 (file)
@@ -67,8 +67,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -82,7 +80,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index 8202c87ca6a3a2bc2058113cde7712638fdfb511..ffade253d129614f6821040daf6e56db839ec7f7 100644 (file)
@@ -63,8 +63,6 @@
                pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
                brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
                default-brightness-level = <8>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&bl_enable_pin>;
                enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
        };
 
@@ -74,8 +72,6 @@
 };
 
 &codec {
-       pinctrl-names = "default";
-       pinctrl-0 = <&codec_pa_pin>;
        allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
        status = "okay";
 };
@@ -93,8 +89,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 #include "axp209.dtsi"
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 
        gt911: touchscreen@5d {
                reg = <0x5d>;
                interrupt-parent = <&pio>;
                interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-               pinctrl-names = "default";
-               pinctrl-0 = <&ts_reset_pin>;
                irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
                reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
                touchscreen-swapped-x-y;
        vref-supply = <&reg_vcc3v0>;
        status = "okay";
 
-       button@571 {
+       button-571 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
                voltage = <571428>;
        };
 
-       button@761 {
+       button-761 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &pio {
-       bl_enable_pin: bl_enable_pin@0 {
-               pins = "PH7";
-               function = "gpio_out";
-       };
-
-       codec_pa_pin: codec_pa_pin@0 {
-               pins = "PH15";
-               function = "gpio_out";
-       };
-
-       ts_reset_pin: ts_reset_pin@0 {
-               pins = "PB13";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
 
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>;
+       pinctrl-0 = <&pwm0_pin>;
        status = "okay";
 };
 
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index ff5c1086585ca4baa2daebad1c4bdbcbc679b694..c27e56091fb19cb471b54b735cc2ffa106bcfcdc 100644 (file)
@@ -62,8 +62,6 @@
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
                reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
        };
 };
@@ -82,7 +80,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
@@ -93,8 +91,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 #include "axp209.dtsi"
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
 };
 
 &pio {
-       vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
-               pins = "PH9";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
index f1fb97d3fb51331af944639bfae2241611a8fec6..11142ae6e7171f780226e3fb30ceb02af0d39180 100644 (file)
@@ -23,6 +23,6 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
index e529e4ff21749b31d83a0690f2e7ada3afb7f5d1..641a8fa6d4289a6d90642def481b82d92a7dee48 100644 (file)
@@ -42,8 +42,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/dma/sun4i-a10.h>
@@ -52,6 +50,8 @@
 
 / {
        interrupt-parent = <&gic>;
+       #address-cells = <1>;
+       #size-cells = <1>;
 
        aliases {
                ethernet0 = &gmac;
@@ -62,7 +62,7 @@
                #size-cells = <1>;
                ranges;
 
-               framebuffer@0 {
+               framebuffer-lcd0-hdmi {
                        compatible = "allwinner,simple-framebuffer",
                                     "simple-framebuffer";
                        allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +73,7 @@
                        status = "disabled";
                };
 
-               framebuffer@1 {
+               framebuffer-lcd0 {
                        compatible = "allwinner,simple-framebuffer",
                                     "simple-framebuffer";
                        allwinner,pipeline = "de_be0-lcd0";
@@ -83,7 +83,7 @@
                        status = "disabled";
                };
 
-               framebuffer@2 {
+               framebuffer-lcd0-tve0 {
                        compatible = "allwinner,simple-framebuffer",
                                     "simple-framebuffer";
                        allwinner,pipeline = "de_be0-lcd0-tve0";
                        #cooling-cells = <2>;
                };
 
-               cpu@1 {
+               cpu1: cpu@1 {
                        compatible = "arm,cortex-a7";
                        device_type = "cpu";
                        reg = <1>;
+                       clocks = <&ccu CLK_CPU>;
+                       clock-latency = <244144>; /* 8 32k periods */
+                       operating-points = <
+                               /* kHz    uV */
+                               960000  1400000
+                               912000  1400000
+                               864000  1300000
+                               720000  1200000
+                               528000  1100000
+                               312000  1000000
+                               144000  1000000
+                               >;
+                       #cooling-cells = <2>;
                };
        };
 
                        cooling-maps {
                                map0 {
                                        trip = <&cpu_alert0>;
-                                       cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                                       cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
                                };
                        };
 
                };
        };
 
-       memory {
-               reg = <0x40000000 0x80000000>;
+       reserved-memory {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+               default-pool {
+                       compatible = "shared-dma-pool";
+                       size = <0x6000000>;
+                       alloc-ranges = <0x4a000000 0x6000000>;
+                       reusable;
+                       linux,cma-default;
+               };
        };
 
        timer {
        };
 
        pmu {
-               compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+               compatible = "arm,cortex-a7-pmu";
                interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
                             <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
        };
                #size-cells = <1>;
                ranges;
 
-               osc24M: clk@1c20050 {
+               osc24M: clk-24M {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
                        clock-frequency = <24000000>;
                        clock-output-names = "osc24M";
                };
 
-               osc32k: clk@0 {
+               osc32k: clk-32k {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
                        clock-frequency = <32768>;
                 * The actual TX clock rate is not controlled by the
                 * gmac_tx clock.
                 */
-               mii_phy_tx_clk: clk@1 {
+               mii_phy_tx_clk: clk-mii-phy-tx {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
                        clock-frequency = <25000000>;
                        clock-output-names = "mii_phy_tx";
                };
 
-               gmac_int_tx_clk: clk@2 {
+               gmac_int_tx_clk: clk-gmac-int-tx {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
                        clock-frequency = <125000000>;
                status = "disabled";
        };
 
-       soc@1c00000 {
+       soc {
                compatible = "simple-bus";
                #address-cells = <1>;
                #size-cells = <1>;
                ranges;
 
-               sram-controller@1c00000 {
-                       compatible = "allwinner,sun4i-a10-sram-controller";
+               system-control@1c00000 {
+                       compatible = "allwinner,sun7i-a20-system-control",
+                                    "allwinner,sun4i-a10-system-control";
                        reg = <0x01c00000 0x30>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                                ranges = <0 0x00000000 0xc000>;
 
                                emac_sram: sram-section@8000 {
-                                       compatible = "allwinner,sun4i-a10-sram-a3-a4";
+                                       compatible = "allwinner,sun7i-a20-sram-a3-a4",
+                                                    "allwinner,sun4i-a10-sram-a3-a4";
                                        reg = <0x8000 0x4000>;
                                        status = "disabled";
                                };
                                ranges = <0 0x00010000 0x1000>;
 
                                otg_sram: sram-section@0 {
-                                       compatible = "allwinner,sun4i-a10-sram-d";
+                                       compatible = "allwinner,sun7i-a20-sram-d",
+                                                    "allwinner,sun4i-a10-sram-d";
                                        reg = <0x0000 0x1000>;
                                        status = "disabled";
                                };
                        };
+
+                       sram_c: sram@1d00000 {
+                               compatible = "mmio-sram";
+                               reg = <0x01d00000 0xd0000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x01d00000 0xd0000>;
+
+                               ve_sram: sram-section@0 {
+                                       compatible = "allwinner,sun7i-a20-sram-c1",
+                                                    "allwinner,sun4i-a10-sram-c1";
+                                       reg = <0x000000 0x80000>;
+                               };
+                       };
                };
 
                nmi_intc: interrupt-controller@1c00030 {
                        };
                };
 
+               video-codec@1c0e000 {
+                       compatible = "allwinner,sun7i-a20-video-engine";
+                       reg = <0x01c0e000 0x1000>;
+                       clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+                                <&ccu CLK_DRAM_VE>;
+                       clock-names = "ahb", "mod", "ram";
+                       resets = <&ccu RST_VE>;
+                       interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+                       allwinner,sram = <&ve_sram 1>;
+               };
+
                mmc0: mmc@1c0f000 {
                        compatible = "allwinner,sun7i-a20-mmc";
                        reg = <0x01c0f000 0x1000>;
                                      "output",
                                      "sample";
                        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                                      "output",
                                      "sample";
                        interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                                      "output",
                                      "sample";
                        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc3_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                                };
 
                                hdmi_out: port@1 {
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
                                        reg = <1>;
                                };
                        };
                        #interrupt-cells = <3>;
                        #gpio-cells = <3>;
 
-                       can0_pins_a: can0@0 {
+                       can_ph_pins: can-ph-pins {
                                pins = "PH20", "PH21";
                                function = "can";
                        };
 
-                       clk_out_a_pins_a: clk_out_a@0 {
+                       clk_out_a_pin: clk-out-a-pin {
                                pins = "PI12";
                                function = "clk_out_a";
                        };
 
-                       clk_out_b_pins_a: clk_out_b@0 {
+                       clk_out_b_pin: clk-out-b-pin {
                                pins = "PI13";
                                function = "clk_out_b";
                        };
 
-                       emac_pins_a: emac0@0 {
+                       emac_pa_pins: emac-pa-pins {
                                pins = "PA0", "PA1", "PA2",
                                       "PA3", "PA4", "PA5", "PA6",
                                       "PA7", "PA8", "PA9", "PA10",
                                function = "emac";
                        };
 
-                       gmac_pins_mii_a: gmac_mii@0 {
+                       gmac_mii_pins: gmac-mii-pins {
                                pins = "PA0", "PA1", "PA2",
                                       "PA3", "PA4", "PA5", "PA6",
                                       "PA7", "PA8", "PA9", "PA10",
                                function = "gmac";
                        };
 
-                       gmac_pins_rgmii_a: gmac_rgmii@0 {
+                       gmac_rgmii_pins: gmac-rgmii-pins {
                                pins = "PA0", "PA1", "PA2",
                                       "PA3", "PA4", "PA5", "PA6",
                                        "PA7", "PA8", "PA10",
                                drive-strength = <40>;
                        };
 
-                       i2c0_pins_a: i2c0@0 {
+                       i2c0_pins: i2c0-pins {
                                pins = "PB0", "PB1";
                                function = "i2c0";
                        };
 
-                       i2c1_pins_a: i2c1@0 {
+                       i2c1_pins: i2c1-pins {
                                pins = "PB18", "PB19";
                                function = "i2c1";
                        };
 
-                       i2c2_pins_a: i2c2@0 {
+                       i2c2_pins: i2c2-pins {
                                pins = "PB20", "PB21";
                                function = "i2c2";
                        };
 
-                       i2c3_pins_a: i2c3@0 {
+                       i2c3_pins: i2c3-pins {
                                pins = "PI0", "PI1";
                                function = "i2c3";
                        };
 
-                       ir0_rx_pins_a: ir0@0 {
+                       ir0_rx_pin: ir0-rx-pin {
                                pins = "PB4";
                                function = "ir0";
                        };
 
-                       ir0_tx_pins_a: ir0@1 {
+                       ir0_tx_pin: ir0-tx-pin {
                                pins = "PB3";
                                function = "ir0";
                        };
 
-                       ir1_rx_pins_a: ir1@0 {
+                       ir1_rx_pin: ir1-rx-pin {
                                pins = "PB23";
                                function = "ir1";
                        };
 
-                       ir1_tx_pins_a: ir1@1 {
+                       ir1_tx_pin: ir1-tx-pin {
                                pins = "PB22";
                                function = "ir1";
                        };
 
-                       mmc0_pins_a: mmc0@0 {
+                       mmc0_pins: mmc0-pins {
                                pins = "PF0", "PF1", "PF2",
                                       "PF3", "PF4", "PF5";
                                function = "mmc0";
                                bias-pull-up;
                        };
 
-                       mmc2_pins_a: mmc2@0 {
+                       mmc2_pins: mmc2-pins {
                                pins = "PC6", "PC7", "PC8",
                                       "PC9", "PC10", "PC11";
                                function = "mmc2";
                                bias-pull-up;
                        };
 
-                       mmc3_pins_a: mmc3@0 {
+                       mmc3_pins: mmc3-pins {
                                pins = "PI4", "PI5", "PI6",
                                       "PI7", "PI8", "PI9";
                                function = "mmc3";
                                bias-pull-up;
                        };
 
-                       ps20_pins_a: ps20@0 {
+                       ps2_0_pins: ps2-0-pins {
                                pins = "PI20", "PI21";
                                function = "ps2";
                        };
 
-                       ps21_pins_a: ps21@0 {
+                       ps2_1_ph_pins: ps2-1-ph-pins {
                                pins = "PH12", "PH13";
                                function = "ps2";
                        };
 
-                       pwm0_pins_a: pwm0@0 {
+                       pwm0_pin: pwm0-pin {
                                pins = "PB2";
                                function = "pwm";
                        };
 
-                       pwm1_pins_a: pwm1@0 {
+                       pwm1_pin: pwm1-pin {
                                pins = "PI3";
                                function = "pwm";
                        };
 
-                       spdif_tx_pins_a: spdif@0 {
+                       spdif_tx_pin: spdif-tx-pin {
                                pins = "PB13";
                                function = "spdif";
                                bias-pull-up;
                        };
 
-                       spi0_pins_a: spi0@0 {
+                       spi0_pi_pins: spi0-pi-pins {
                                pins = "PI11", "PI12", "PI13";
                                function = "spi0";
                        };
 
-                       spi0_cs0_pins_a: spi0_cs0@0 {
+                       spi0_cs0_pi_pin: spi0-cs0-pi-pin {
                                pins = "PI10";
                                function = "spi0";
                        };
 
-                       spi0_cs1_pins_a: spi0_cs1@0 {
+                       spi0_cs1_pi_pin: spi0-cs1-pi-pin {
                                pins = "PI14";
                                function = "spi0";
                        };
 
-                       spi1_pins_a: spi1@0 {
+                       spi1_pi_pins: spi1-pi-pins {
                                pins = "PI17", "PI18", "PI19";
                                function = "spi1";
                        };
 
-                       spi1_cs0_pins_a: spi1_cs0@0 {
+                       spi1_cs0_pi_pin: spi1-cs0-pi-pin {
                                pins = "PI16";
                                function = "spi1";
                        };
 
-                       spi2_pins_a: spi2@0 {
-                               pins = "PC20", "PC21", "PC22";
+                       spi2_pb_pins: spi2-pb-pins {
+                               pins = "PB15", "PB16", "PB17";
                                function = "spi2";
                        };
 
-                       spi2_pins_b: spi2@1 {
-                               pins = "PB15", "PB16", "PB17";
+                       spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+                               pins = "PB14";
                                function = "spi2";
                        };
 
-                       spi2_cs0_pins_a: spi2_cs0@0 {
-                               pins = "PC19";
+                       spi2_pc_pins: spi2-pc-pins {
+                               pins = "PC20", "PC21", "PC22";
                                function = "spi2";
                        };
 
-                       spi2_cs0_pins_b: spi2_cs0@1 {
-                               pins = "PB14";
+                       spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+                               pins = "PC19";
                                function = "spi2";
                        };
 
-                       uart0_pins_a: uart0@0 {
+                       uart0_pb_pins: uart0-pb-pins {
                                pins = "PB22", "PB23";
                                function = "uart0";
                        };
 
-                       uart2_pins_a: uart2@0 {
-                               pins = "PI16", "PI17", "PI18", "PI19";
+                       uart2_pi_pins: uart2-pi-pins {
+                               pins = "PI18", "PI19";
                                function = "uart2";
                        };
 
-                       uart3_pins_a: uart3@0 {
-                               pins = "PG6", "PG7", "PG8", "PG9";
+                       uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+                               pins = "PI16", "PI17";
+                               function = "uart2";
+                       };
+
+                       uart3_pg_pins: uart3-pg-pins {
+                               pins = "PG6", "PG7";
+                               function = "uart3";
+                       };
+
+                       uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+                               pins = "PG8", "PG9";
                                function = "uart3";
                        };
 
-                       uart3_pins_b: uart3@1 {
+                       uart3_ph_pins: uart3-ph-pins {
                                pins = "PH0", "PH1";
                                function = "uart3";
                        };
 
-                       uart4_pins_a: uart4@0 {
+                       uart4_pg_pins: uart4-pg-pins {
                                pins = "PG10", "PG11";
                                function = "uart4";
                        };
 
-                       uart4_pins_b: uart4@1 {
+                       uart4_ph_pins: uart4-ph-pins {
                                pins = "PH4", "PH5";
                                function = "uart4";
                        };
 
-                       uart5_pins_a: uart5@0 {
+                       uart5_pi_pins: uart5-pi-pins {
                                pins = "PI10", "PI11";
                                function = "uart5";
                        };
 
-                       uart6_pins_a: uart6@0 {
+                       uart6_pi_pins: uart6-pi-pins {
                                pins = "PI12", "PI13";
                                function = "uart6";
                        };
 
-                       uart7_pins_a: uart7@0 {
+                       uart7_pi_pins: uart7-pi-pins {
                                pins = "PI20", "PI21";
                                function = "uart7";
                        };
                        reg = <0x01c2ac00 0x400>;
                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_APB1_I2C0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0x01c2b000 0x400>;
                        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_APB1_I2C1>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c1_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0x01c2b400 0x400>;
                        interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_APB1_I2C2>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0x01c2b800 0x400>;
                        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_APB1_I2C3>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c3_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
index 2565d5137a17e300c4f9274277303d5626e761f2..0d002f83a259c73b53d2dba9500b650950875c86 100644 (file)
@@ -65,8 +65,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -75,8 +73,6 @@
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };