armv8: ls1088ardb: Add TFABOOT support
authorPankit Garg <pankit.garg@nxp.com>
Thu, 27 Dec 2018 04:37:55 +0000 (04:37 +0000)
committerYork Sun <york.sun@nxp.com>
Thu, 17 Jan 2019 21:16:04 +0000 (13:16 -0800)
TFABOOT support includes:
- ls1088ardb_tfa_defconfig to be loaded by trusted firmware
- environment address and size changes for TFABOOT
- MC address changes for TFABOOT
- define BOOTCOMMAND for TFABOOT
- ifc chip select changes for TFABOOT

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
arch/arm/cpu/armv8/fsl-layerscape/Kconfig
board/freescale/ls1088a/MAINTAINERS
board/freescale/ls1088a/ddr.c
board/freescale/ls1088a/ls1088a.c
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig [new file with mode: 0644]
configs/ls1088ardb_tfa_defconfig [new file with mode: 0644]
include/configs/ls1088a_common.h
include/configs/ls1088ardb.h

index 2b086da79b1bb7fe94c266b49106420a9561bcc7..4e6a3cb2239a4a2dbaec01530df57d190e110e5f 100644 (file)
@@ -89,7 +89,7 @@ config ARCH_LS1046A
 config ARCH_LS1088A
        bool
        select ARMV8_SET_SMPEN
-       select ARM_ERRATA_855873
+       select ARM_ERRATA_855873 if !TFABOOT
        select FSL_LSCH3
        select SYS_FSL_SRDS_1
        select SYS_HAS_SERDES
@@ -98,11 +98,11 @@ config ARCH_LS1088A
        select SYS_FSL_DDR_VER_50
        select SYS_FSL_EC1
        select SYS_FSL_EC2
-       select SYS_FSL_ERRATUM_A009803
-       select SYS_FSL_ERRATUM_A009942
-       select SYS_FSL_ERRATUM_A010165
-       select SYS_FSL_ERRATUM_A008511
-       select SYS_FSL_ERRATUM_A008850
+       select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+       select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+       select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+       select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+       select SYS_FSL_ERRATUM_A008850 if !TFABOOT
        select SYS_FSL_ERRATUM_A009007
        select SYS_FSL_HAS_CCI400
        select SYS_FSL_HAS_DDR4
index 4d804d944713cba390b87fc17667a479ff0f2ad5..bca9969637b6ae9b89157c7b78cc78ad9d2c3d1c 100644 (file)
@@ -1,15 +1,18 @@
 LS1088ARDB BOARD
 M:     Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:     Ashish Kumar <Ashish.Kumar@nxp.com>
+M:     Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:     Maintained
 F:     board/freescale/ls1088a/
 F:     include/configs/ls1088ardb.h
 F:     configs/ls1088ardb_qspi_defconfig
 F:     configs/ls1088ardb_sdcard_qspi_defconfig
+F:     configs/ls1088ardb_tfa_defconfig
 
 LS1088AQDS BOARD
 M:     Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:     Ashish Kumar <Ashish.Kumar@nxp.com>
+M:     Rajesh Bhagat <rajesh.bhagat@nxp.com>
 S:     Maintained
 F:     board/freescale/ls1088a/
 F:     include/configs/ls1088aqds.h
@@ -17,6 +20,7 @@ F:    configs/ls1088aqds_qspi_defconfig
 F:     configs/ls1088aqds_sdcard_qspi_defconfig
 F:     configs/ls1088aqds_defconfig
 F:     configs/ls1088aqds_sdcard_ifc_defconfig
+F:     configs/ls1088aqds_tfa_defconfig
 
 LS1088AQDS_QSPI_SECURE_BOOT BOARD
 M:     Udit Agarwal <udit.agarwal@nxp.com>
index 78d573a8455620c05daf4a1a41fc0f59f6deddde..c21a2ce059dfde1d7f3e722c6627abb204057035 100644 (file)
@@ -111,7 +111,17 @@ found:
                          DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
 }
 
+#ifdef CONFIG_TFABOOT
+int fsl_initdram(void)
+{
+       gd->ram_size = tfa_get_dram_size();
+
+       if (!gd->ram_size)
+               gd->ram_size = fsl_ddr_sdram_size();
 
+       return 0;
+}
+#else
 int fsl_initdram(void)
 {
        puts("Initializing DDR....using SPD\n");
@@ -123,3 +133,4 @@ int fsl_initdram(void)
 #endif
        return 0;
 }
+#endif /* CONFIG_TFABOOT */
index 1e2ad98c6e3f1e53dc92004a75767f055e6ff271..f3018aa5da4da6ede9e3c846c0ea4dd51af235e7 100644 (file)
@@ -88,6 +88,9 @@ int fixup_ls1088ardb_pb_banner(void *fdt)
 #if !defined(CONFIG_SPL_BUILD)
 int checkboard(void)
 {
+#ifdef CONFIG_TFABOOT
+       enum boot_src src = get_boot_src();
+#endif
        char buf[64];
        u8 sw;
        static const char *const freq[] = {"100", "125", "156.25",
@@ -117,9 +120,14 @@ int checkboard(void)
        sw = QIXIS_READ(brdcfg[0]);
        sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
 
+#ifdef CONFIG_TFABOOT
+       if (src == BOOT_SOURCE_SD_MMC)
+               puts("SD card\n");
+#else
 #ifdef CONFIG_SD_BOOT
        puts("SD card\n");
 #endif
+#endif /* CONFIG_TFABOOT */
        switch (sw) {
 #ifdef CONFIG_TARGET_LS1088AQDS
        case 0:
@@ -546,6 +554,10 @@ void fdt_fixup_board_enet(void *fdt)
 void fsl_fdt_fixup_flash(void *fdt)
 {
        int offset;
+#ifdef CONFIG_TFABOOT
+       u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+       u32 val;
+#endif
 
 /*
  * IFC-NOR and QSPI are muxed on SoC.
@@ -553,6 +565,37 @@ void fsl_fdt_fixup_flash(void *fdt)
  * disable QSPI node in dts in case QSPI is not enabled.
  */
 
+#ifdef CONFIG_TFABOOT
+       enum boot_src src = get_boot_src();
+       bool disable_ifc = false;
+
+       switch (src) {
+       case BOOT_SOURCE_IFC_NOR:
+               disable_ifc = false;
+               break;
+       case BOOT_SOURCE_QSPI_NOR:
+               disable_ifc = true;
+               break;
+       default:
+               val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
+               if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
+                       disable_ifc = true;
+               break;
+       }
+
+       if (disable_ifc) {
+               offset = fdt_path_offset(fdt, "/soc/ifc/nor");
+
+               if (offset < 0)
+                       offset = fdt_path_offset(fdt, "/ifc/nor");
+       } else {
+               offset = fdt_path_offset(fdt, "/soc/quadspi");
+
+               if (offset < 0)
+                       offset = fdt_path_offset(fdt, "/quadspi");
+       }
+
+#else
 #ifdef CONFIG_FSL_QSPI
        offset = fdt_path_offset(fdt, "/soc/ifc/nor");
 
@@ -563,6 +606,7 @@ void fsl_fdt_fixup_flash(void *fdt)
 
        if (offset < 0)
                offset = fdt_path_offset(fdt, "/quadspi");
+#endif
 #endif
        if (offset < 0)
                return;
@@ -613,3 +657,37 @@ int ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 #endif /* defined(CONFIG_SPL_BUILD) */
+
+#ifdef CONFIG_TFABOOT
+#ifdef CONFIG_MTD_NOR_FLASH
+int is_flash_available(void)
+{
+       char *env_hwconfig = env_get("hwconfig");
+       enum boot_src src = get_boot_src();
+       int is_nor_flash_available = 1;
+
+       switch (src) {
+       case BOOT_SOURCE_IFC_NOR:
+               is_nor_flash_available = 1;
+               break;
+       case BOOT_SOURCE_QSPI_NOR:
+               is_nor_flash_available = 0;
+               break;
+       /*
+        * In Case of SD boot,if qspi is defined in env_hwconfig
+        * disable nor flash probe.
+        */
+       default:
+               if (hwconfig_f("qspi", env_hwconfig))
+                       is_nor_flash_available = 0;
+               break;
+       }
+       return is_nor_flash_available;
+}
+#endif
+
+void *env_sf_get_env_addr(void)
+{
+       return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
+}
+#endif
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
new file mode 100644 (file)
index 0000000..ae177d3
--- /dev/null
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_SECURE_BOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
+CONFIG_RSA=y
+CONFIG_SPL_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
new file mode 100644 (file)
index 0000000..3328af4
--- /dev/null
@@ -0,0 +1,61 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_FSL_SPI_ALIGNED_TXFIFO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
index 743d0cf30fa19194a412c8ac488cc3fcc842e8be..95e6786e6cfe412f45bb84455b65793a0ba6273a 100644 (file)
 
 #define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* Link Definitions */
-
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
+#else
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
 #define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_FSL_QSPI_BASE + \
                                                CONFIG_ENV_OFFSET)
 #endif
+#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -192,6 +199,7 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
+#ifndef CONFIG_TFABOOT
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND     "sf probe 0:0;" \
                                "sf read 0x80001000 0xd00000 0x100000;"\
@@ -208,6 +216,7 @@ unsigned long long get_qixis_addr(void);
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 #endif
+#endif /* CONFIG_TFABOOT  */
 #endif
 
 /* Monitor Command Prompt */
index 5269bcd243f31b7a0361143180db7e6f7292b691..f52ea4d746c7e9dc1529af6628e2404c62ec069e 100644 (file)
@@ -8,6 +8,15 @@
 
 #include "ls1088a_common.h"
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV         0
+
+#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET              0x500000
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + \
+                                        CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE           0x40000
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x20000
 #endif
+#endif /* CONFIG_TFABOOT */
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+       defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_QIXIS_I2C_ACCESS
 #endif
                                        FTIM2_GPCM_TWP(0x3E))
 #define SYS_FPGA_CS_FTIM3      0x0
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+       defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NOR_FTIM3
 #endif
 
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 #define I2C_MUX_CH_VOL_MONITOR          0xA
 
 #ifndef SPL_NO_QSPI
 /* QSPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+       defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define FSL_QSPI_FLASH_SIZE            (1 << 26)
 #define FSL_QSPI_FLASH_NUM             2
 #endif
 
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
+#ifdef CONFIG_TFABOOT
+#define QSPI_MC_INIT_CMD                               \
+       "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
+       "sf read 0x80100000 0xE00000 0x100000;"                         \
+       "env exists secureboot && "                     \
+       "sf read 0x80700000 0x700000 0x40000 && "       \
+       "sf read 0x80740000 0x740000 0x40000 && "       \
+       "esbc_validate 0x80700000 && "                  \
+       "esbc_validate 0x80740000 ;"                    \
+       "fsl_mc start mc 0x80000000 0x80100000\0"
+#define SD_MC_INIT_CMD                         \
+       "mmcinfo;mmc read 0x80000000 0x5000 0x800;"             \
+       "mmc read 0x80100000 0x7000 0x800;"                             \
+       "env exists secureboot && "                     \
+       "mmc read 0x80700000 0x3800 0x10 && "           \
+       "mmc read 0x80740000 0x3A00 0x10 && "           \
+       "esbc_validate 0x80700000 && "                  \
+       "esbc_validate 0x80740000 ;"                    \
+       "fsl_mc start mc 0x80000000 0x80100000\0"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define MC_INIT_CMD                            \
        "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
        "fsl_mc start mc 0x80000000 0x80100000\0"       \
        "mcmemsize=0x70000000\0"
 #endif
+#endif /* CONFIG_TFABOOT */
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_TFABOOT
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "BOARD=ls1088ardb\0"                    \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "fdt_addr=0x64f00000\0"                 \
+       "kernel_addr=0x1000000\0"               \
+       "kernel_addr_sd=0x8000\0"               \
+       "kernelhdr_addr_sd=0x4000\0"            \
+       "kernel_start=0x580100000\0"            \
+       "kernelheader_start=0x580800000\0"      \
+       "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr=0x800000\0"          \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x81000000\0"            \
+       "kernelheader_size=0x40000\0"           \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "kernel_size_sd=0x14000\0"              \
+       "kernelhdr_size_sd=0x10\0"              \
+       QSPI_MC_INIT_CMD                        \
+       "mcmemsize=0x70000000\0"                \
+       BOOTENV                                 \
+       "boot_scripts=ls1088ardb_boot.scr\0"    \
+       "boot_script_hdr=hdr_ls1088ardb_bs.out\0"       \
+       "scan_dev_for_boot_part="               \
+               "part list ${devtype} ${devnum} devplist; "     \
+               "env exists devplist || setenv devplist 1; "    \
+               "for distro_bootpart in ${devplist}; do "       \
+                       "if fstype ${devtype} "                 \
+                               "${devnum}:${distro_bootpart} " \
+                               "bootfstype; then "             \
+                               "run scan_dev_for_boot; "       \
+                       "fi; "                                  \
+               "done\0"                                        \
+       "scan_dev_for_boot="                                    \
+               "echo Scanning ${devtype} "                     \
+               "${devnum}:${distro_bootpart}...; "             \
+               "for prefix in ${boot_prefixes}; do "           \
+                       "run scan_dev_for_scripts; "            \
+               "done;\0"                                       \
+       "boot_a_script="                                        \
+               "load ${devtype} ${devnum}:${distro_bootpart} " \
+               "${scriptaddr} ${prefix}${script}; "            \
+       "env exists secureboot && load ${devtype} "             \
+               "${devnum}:${distro_bootpart} "                 \
+               "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+               "&& esbc_validate ${scripthdraddr};"            \
+               "source ${scriptaddr}\0"                        \
+       "installer=load mmc 0:2 $load_addr "                    \
+               "/flex_installer_arm64.itb; "                   \
+               "env exists mcinitcmd && run mcinitcmd && "     \
+               "mmc read 0x80001000 0x6800 0x800;"             \
+               "fsl_mc lazyapply dpl 0x80001000;"                      \
+               "bootm $load_addr#ls1088ardb\0"                 \
+       "qspi_bootcmd=echo Trying load from qspi..;"            \
+               "sf probe && sf read $load_addr "               \
+               "$kernel_addr $kernel_size ; env exists secureboot "    \
+               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+               "bootm $load_addr#$BOARD\0"                     \
+               "sd_bootcmd=echo Trying load from sd card..;"           \
+               "mmcinfo; mmc read $load_addr "                 \
+               "$kernel_addr_sd $kernel_size_sd ;"             \
+               "env exists secureboot && mmc read $kernelheader_addr_r "\
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
+               " && esbc_validate ${kernelheader_addr_r};"     \
+               "bootm $load_addr#$BOARD\0"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "BOARD=ls1088ardb\0"                    \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
                "$kernelhdr_addr_sd $kernelhdr_size_sd "        \
                " && esbc_validate ${kernelheader_addr_r};"     \
                "bootm $load_addr#$BOARD\0"
+#endif /* CONFIG_TFABOOT */
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND                                   \
+               "sf read 0x80001000 0xd00000 0x100000;"         \
+               "env exists mcinitcmd && env exists secureboot "        \
+               " && sf read 0x80780000 0x780000 0x100000 "     \
+               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               "&& fsl_mc lazyapply dpl 0x80001000;"           \
+               "run distro_bootcmd;run qspi_bootcmd;"          \
+               "env exists secureboot && esbc_halt;"
+#define SD_BOOTCOMMAND                                         \
+               "env exists mcinitcmd && mmcinfo; "             \
+               "mmc read 0x80001000 0x6800 0x800; "            \
+               "env exists mcinitcmd && env exists secureboot "        \
+               " && mmc read 0x80780000 0x3C00 0x10 "          \
+               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               "&& fsl_mc lazyapply dpl 0x80001000;"           \
+               "run distro_bootcmd;run sd_bootcmd;"            \
+               "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND                                      \
                "run distro_bootcmd;run sd_bootcmd;"            \
                "env exists secureboot && esbc_halt;"
 #endif
+#endif /* CONFIG_TFABOOT */
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET