diff options
| author | Anton Yu. Ivanusev | 2025-01-07 20:14:10 +0000 |
|---|---|---|
| committer | Hauke Mehrtens | 2025-01-12 16:46:23 +0000 |
| commit | 191ed4e803bbd82e9023d73ed9ff3c1d5ea64892 (patch) | |
| tree | b98035328abd5d886edcd0c66bad37bb00e753a9 | |
| parent | 96850585e52dfff2c25d8b20b0b5cd192981ed4d (diff) | |
| download | openwrt-191ed4e803bbd82e9023d73ed9ff3c1d5ea64892.tar.gz | |
ramips: mt76x8: fixs for Keenetic Air (KN-1613) and Extra (KN-1713)
A new syntax for LEDs was used, and migration of the LEDs configuration was
added. Used lower case hex characters for the addresses. Fixed a USB port
power issue.
Signed-off-by: Anton Yu. Ivanusev <ivanusevanton@yandex.ru>
Link: https://github.com/openwrt/openwrt/pull/17521
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 files changed, 39 insertions, 18 deletions
diff --git a/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts b/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts index 4b124c9295..af6292980b 100644 --- a/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts +++ b/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts @@ -30,18 +30,21 @@ }; internet { - label = "green:internet"; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; }; wifi2 { - label = "green:wifi2"; + function = LED_FUNCTION_WLAN_2GHZ; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wifi5 { - label = "green:wifi5"; + function = LED_FUNCTION_WLAN_5GHZ; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ramips/dts/mt7628an_keenetic_kn-1713.dts b/target/linux/ramips/dts/mt7628an_keenetic_kn-1713.dts index 972c88eadd..84127a88e0 100644 --- a/target/linux/ramips/dts/mt7628an_keenetic_kn-1713.dts +++ b/target/linux/ramips/dts/mt7628an_keenetic_kn-1713.dts @@ -27,6 +27,7 @@ regulator-max-microvolt = <5000000>; gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; enable-active-high; + regulator-always-on; }; leds { @@ -44,17 +45,18 @@ gpios = <&gpio 38 GPIO_ACTIVE_LOW>; }; - fn { - function = LED_FUNCTION_USB; + wifi2 { + function = LED_FUNCTION_WLAN_2GHZ; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; - wifi { - function = LED_FUNCTION_WLAN; + wifi5 { + function = LED_FUNCTION_WLAN_5GHZ; color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt","phy1tpt"; + linux,default-trigger = "phy1tpt"; }; }; @@ -93,7 +95,7 @@ partition@0 { compatible = "denx,uimage"; label = "firmware"; - reg = <0x0 0x1CC0000>; + reg = <0x0 0x1cc0000>; }; }; }; @@ -160,21 +162,21 @@ reg = <0x50000 0xe60000>; }; - partition@EB0000 { + partition@eb0000 { label = "config_1"; - reg = <0xEB0000 0x40000>; + reg = <0xeb0000 0x40000>; read-only; }; - partition@EF0000 { + partition@ef0000 { label = "storage"; - reg = <0xEF0000 0x100000>; + reg = <0xef0000 0x100000>; read-only; }; - partition@FF0000 { + partition@ff0000 { label = "dump"; - reg = <0xFF0000 0x10000>; + reg = <0xff0000 0x10000>; read-only; }; @@ -198,12 +200,12 @@ firmware2: partition@1050000 { label = "firmware_2"; - reg = <0x1050000 0xE60000>; + reg = <0x1050000 0xe60000>; }; - partition@1EB0000 { + partition@1eb0000 { label = "Config_2"; - reg = <0x1EB0000 0x40000>; + reg = <0x1eb0000 0x40000>; read-only; }; }; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/04_led_migration b/target/linux/ramips/mt76x8/base-files/etc/board.d/04_led_migration new file mode 100644 index 0000000000..c845fadd73 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/04_led_migration @@ -0,0 +1,16 @@ +. /lib/functions.sh +. /lib/functions/migrations.sh + +board=$(board_name) + +case "$board" in +keenetic,kn-1613) + migrate_leds 'green:internet=green:wan' + ;; +esac + +remove_devicename_leds + +migrations_apply system + +exit 0 |