atheros: added marvell switch driver
authorMatteo Croce <rootkit85@yahoo.it>
Tue, 13 May 2008 00:10:45 +0000 (00:10 +0000)
committerMatteo Croce <rootkit85@yahoo.it>
Tue, 13 May 2008 00:10:45 +0000 (00:10 +0000)
SVN-Revision: 11129

target/linux/atheros/config-2.6.25
target/linux/atheros/patches-2.6.25/200-ar2313_enable_mvswitch.patch [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.25/610-phy_detect.patch [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.25/620-phy_adm6996.patch [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.25/630-phy_packets.patch [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.25/640-mvswitch.patch [new file with mode: 0644]

index 2408411f5e11efe0910e97ff081b346f17765c36..2000410722d850bd786c1645b63649ca3e6a2e3f 100644 (file)
@@ -1,5 +1,6 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
+# CONFIG_ADM6996_PHY is not set
 CONFIG_AR2313=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -166,6 +167,7 @@ CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 CONFIG_MTD_SPIFLASH=y
+CONFIG_MVSWITCH_PHY=y
 # CONFIG_NET_PCI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_NEW_GPIO=y
diff --git a/target/linux/atheros/patches-2.6.25/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.25/200-ar2313_enable_mvswitch.patch
new file mode 100644 (file)
index 0000000..1c7d7c2
--- /dev/null
@@ -0,0 +1,38 @@
+Index: linux-2.6.25.1/drivers/net/ar2313/ar2313.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/ar2313/ar2313.c    2008-05-13 00:49:39.000000000 +0200
++++ linux-2.6.25.1/drivers/net/ar2313/ar2313.c 2008-05-13 00:49:42.000000000 +0200
+@@ -953,9 +953,9 @@
+                                               ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+                               dev->stats.rx_bytes += skb->len;
+-                              skb->protocol = eth_type_trans(skb, dev);
++
+                               /* pass the packet to upper layers */
+-                              netif_rx(skb);
++                              sp->rx(skb);
+                               skb_new->dev = dev;
+                               /* 16 bit align */
+@@ -1370,6 +1370,8 @@
+               return PTR_ERR(phydev);
+       }
++      sp->rx = phydev->netif_rx;
++
+       /* mask with MAC supported features */
+       phydev->supported &= (SUPPORTED_10baseT_Half
+               | SUPPORTED_10baseT_Full
+Index: linux-2.6.25.1/drivers/net/ar2313/ar2313.h
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/ar2313/ar2313.h    2008-05-13 00:49:39.000000000 +0200
++++ linux-2.6.25.1/drivers/net/ar2313/ar2313.h 2008-05-13 00:49:42.000000000 +0200
+@@ -107,6 +107,8 @@
+  */
+ struct ar2313_private {
+       struct net_device *dev;
++      int (*rx)(struct sk_buff *skb);
++
+       int version;
+       u32 mb[2];
diff --git a/target/linux/generic-2.6/patches-2.6.25/610-phy_detect.patch b/target/linux/generic-2.6/patches-2.6.25/610-phy_detect.patch
new file mode 100644 (file)
index 0000000..4544153
--- /dev/null
@@ -0,0 +1,30 @@
+Index: linux-2.6.25.1/drivers/net/phy/mdio_bus.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/mdio_bus.c     2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/mdio_bus.c  2008-05-12 23:44:21.000000000 +0200
+@@ -132,6 +132,9 @@
+       struct phy_device *phydev = to_phy_device(dev);
+       struct phy_driver *phydrv = to_phy_driver(drv);
++      if (phydrv->detect)
++              return (phydrv->detect(phydev->bus, phydev->addr));
++
+       return ((phydrv->phy_id & phydrv->phy_id_mask) ==
+               (phydev->phy_id & phydrv->phy_id_mask));
+ }
+Index: linux-2.6.25.1/include/linux/phy.h
+===================================================================
+--- linux-2.6.25.1.orig/include/linux/phy.h    2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/include/linux/phy.h 2008-05-12 23:44:21.000000000 +0200
+@@ -325,6 +325,11 @@
+       u32 features;
+       u32 flags;
++      /* Called during discovery to test if the
++       * device can attach to the bus, even if
++       * phy id and mask do not match */
++      bool (*detect)(struct mii_bus *bus, int addr);
++
+       /* Called to initialize the PHY,
+        * including after a reset */
+       int (*config_init)(struct phy_device *phydev);
diff --git a/target/linux/generic-2.6/patches-2.6.25/620-phy_adm6996.patch b/target/linux/generic-2.6/patches-2.6.25/620-phy_adm6996.patch
new file mode 100644 (file)
index 0000000..10da7cf
--- /dev/null
@@ -0,0 +1,28 @@
+Index: linux-2.6.25.1/drivers/net/phy/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/Kconfig        2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/Kconfig     2008-05-12 23:44:33.000000000 +0200
+@@ -65,6 +65,11 @@
+       ---help---
+         Supports the Realtek 821x PHY.
++config ADM6996_PHY
++      tristate "Driver for ADM6996 switches"
++      ---help---
++        Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+       depends on PHYLIB=y
+Index: linux-2.6.25.1/drivers/net/phy/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/Makefile       2008-05-01 23:45:25.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/Makefile    2008-05-12 23:44:50.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_VITESSE_PHY)     += vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)    += broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)      += icplus.o
++obj-$(CONFIG_ADM6996_PHY)     += adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
diff --git a/target/linux/generic-2.6/patches-2.6.25/630-phy_packets.patch b/target/linux/generic-2.6/patches-2.6.25/630-phy_packets.patch
new file mode 100644 (file)
index 0000000..930139b
--- /dev/null
@@ -0,0 +1,66 @@
+Index: linux-2.6.23.16/drivers/net/phy/phy_device.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/phy_device.c  2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/phy_device.c       2008-04-29 14:20:03.000000000 +0200
+@@ -44,6 +44,18 @@
+ extern int mdio_bus_init(void);
+ extern void mdio_bus_exit(void);
++static int generic_receive_skb(struct sk_buff *skb)
++{
++      skb->protocol = eth_type_trans(skb, skb->dev);
++      return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++      skb->protocol = eth_type_trans(skb, skb->dev);
++      return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+       struct phy_device *dev;
+@@ -67,6 +79,8 @@
+       dev->bus = bus;
+       dev->state = PHY_DOWN;
++      dev->netif_receive_skb = &generic_receive_skb;
++      dev->netif_rx = &generic_rx;
+       spin_lock_init(&dev->lock);
+Index: linux-2.6.23.16/include/linux/phy.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/phy.h   2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/include/linux/phy.h        2008-04-20 10:17:58.000000000 +0200
+@@ -289,6 +289,17 @@
+       void (*adjust_link)(struct net_device *dev);
+       void (*adjust_state)(struct net_device *dev);
++
++      /*
++       * By default these point to the original functions
++       * with the same name. adding them to the phy_device
++       * allows the phy driver to override them for packet
++       * mangling if the ethernet driver supports it
++       * This is required to support some really horrible
++       * switches such as the Marvell 88E6060
++       */
++      int (*netif_receive_skb)(struct sk_buff *skb);
++      int (*netif_rx)(struct sk_buff *skb);
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+Index: linux-2.6.23.16/include/linux/netdevice.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/netdevice.h     2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/include/linux/netdevice.h  2008-04-20 10:17:58.000000000 +0200
+@@ -426,6 +426,7 @@
+       void                    *ax25_ptr;      /* AX.25 specific data */
+       struct wireless_dev     *ieee80211_ptr; /* IEEE 802.11 specific data,
+                                                  assign before registering */
++      void                    *phy_ptr; /* PHY device specific data */
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic-2.6/patches-2.6.25/640-mvswitch.patch b/target/linux/generic-2.6/patches-2.6.25/640-mvswitch.patch
new file mode 100644 (file)
index 0000000..1adcf0d
--- /dev/null
@@ -0,0 +1,54 @@
+Index: linux-2.6.25.1/drivers/net/phy/Kconfig
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/Kconfig        2008-05-12 23:44:33.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/Kconfig     2008-05-12 23:45:33.000000000 +0200
+@@ -70,6 +70,12 @@
+       ---help---
+         Currently supports the ADM6996F switch
++config MVSWITCH_PHY
++      tristate "Driver for Marvell switches"
++      select VLAN_8021Q
++      ---help---
++        Currently supports the Marvell 88E6060 switch.
++
+ config FIXED_PHY
+       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+       depends on PHYLIB=y
+Index: linux-2.6.25.1/drivers/net/phy/Makefile
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/Makefile       2008-05-12 23:44:50.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/Makefile    2008-05-12 23:45:59.000000000 +0200
+@@ -13,6 +13,7 @@
+ obj-$(CONFIG_BROADCOM_PHY)    += broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)      += icplus.o
+ obj-$(CONFIG_ADM6996_PHY)     += adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)    += mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+Index: linux-2.6.25.1/drivers/net/phy/mdio_bus.c
+===================================================================
+--- linux-2.6.25.1.orig/drivers/net/phy/mdio_bus.c     2008-05-12 23:44:21.000000000 +0200
++++ linux-2.6.25.1/drivers/net/phy/mdio_bus.c  2008-05-12 23:45:33.000000000 +0200
+@@ -35,6 +35,12 @@
+ #include <asm/irq.h>
+ #include <asm/uaccess.h>
++static void mdio_dev_release(struct device *dev)
++{
++      /* nothing to do */
++}
++
++
+ /**
+  * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
+  * @bus: target mii_bus
+@@ -85,6 +91,7 @@
+                       phydev->dev.parent = bus->dev;
+                       phydev->dev.bus = &mdio_bus_type;
++                      phydev->dev.release = mdio_dev_release;
+                       snprintf(phydev->dev.bus_id, BUS_ID_SIZE, PHY_ID_FMT, bus->id, i);
+                       phydev->bus = bus;