*/
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
/include/ "fsl/p1020si-pre.dtsi"
/ {
reset {
label = "Reset button";
- gpios = <&gpio0 8 1>; /* active low */
- linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
};
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "OCEDO Panda";
compatible = "gpio-leds";
power {
- gpios = <&gpio0 0 0>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
label = "panda:green:power";
default-state = "on";
};
wlan0 {
- gpios = <&gpio0 3 0>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
label = "panda:yellow:wlan0";
linux,default-trigger = "phy0tpt";
};
wlan1 {
- gpios = <&gpio0 2 0>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
label = "panda:red:wlan1";
linux,default-trigger = "phy1tpt";
};
tbd_orange {
- gpios = <&gpio0 1 0>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
label = "panda:orange:tbd";
};
system_blue: system {
- gpios = <&gpio0 4 0>;
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
label = "panda:blue:system";
};
};
reset {
label = "Reset button";
- gpios = <&gpio0 6 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
};
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "fsl/p1010si-pre.dtsi"
/ {
compatible = "gpio-leds";
system_green: system_green {
- gpios = <&gpio0 7 0>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
label = "red-15w-rev1:green:system";
};
system_red: system_red {
- gpios = <&gpio0 3 0>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
label = "red-15w-rev1:red:system";
};
router {
- gpios = <&gpio0 5 1>;
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
label = "red-15w-rev1:green:router";
};
internet {
- gpios = <&gpio0 4 1>;
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
label = "red-15w-rev1:green:internet";
};
tunnel {
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
label = "red-15w-rev1:green:tunnel";
};
};
* option) any later version.
*/
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "fsl/p1010si-pre.dtsi"
/ {
reg = <0x0 0x0050000>;
label = "u-boot";
read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_uboot_4fc00: macaddr@4fc00 {
+ reg = <0x4fc00 0x6>;
+ };
};
partition@50000 {
compatible = "gpio-leds";
system_green: system {
- gpios = <&gpio0 2 1>; /* active low */
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "tp-link:blue:system";
};
usb1 {
- gpios = <&gpio0 3 1>; /* active low */
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
label = "tp-link:green:usb1";
};
usb2 {
- gpios = <&gpio0 4 1>; /* active low */
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
label = "tp-link:green:usb2";
};
usbpower {
- gpios = <&gpio0 10 1>; /* active low */
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
label = "tp-link:usb:power";
};
};
reset {
label = "Reset button";
- gpios = <&gpio0 5 1>; /* active low */
- linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
rfkill {
label = "RFKILL switch";
- gpios = <&gpio0 11 1>; /* active low */
- linux,code = <0xf7>; /* RFKill */
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKill>;
};
};
};
/delete-node/ crypto@30000; /* Pulled in by p1010si-post */
};
};
-
-&uboot {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_uboot_4fc00: macaddr@4fc00 {
- reg = <0x4fc00 0x6>;
- };
-};
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "Enterasys WS-AP3710i";
compatible = "gpio-leds";
wifi1 {
- gpios = <&gpio0 3 0>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
label = "ws-ap3710i:green:radio1";
linux,default-trigger = "phy0tpt";
};
wifi2 {
- gpios = <&gpio0 4 0>;
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
label = "ws-ap3710i:green:radio2";
linux,default-trigger = "phy1tpt";
};
led_power_green: power_green {
- gpios = <&gpio0 8 0>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
label = "ws-ap3710i:green:power";
};
led_power_red: power_red {
- gpios = <&gpio0 9 0>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
label = "ws-ap3710i:red:power";
};
};
reset {
label = "Reset button";
- gpios = <&gpio0 1 1>; /* active low */
- linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
mdio@24000 {
phy4: ethernet-phy@4 {
reg = <0x4>;
- reset-gpios = <&gpio0 2 1>;
+ reset-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
};