diff options
| author | Robert Marko | 2025-01-18 11:25:01 +0000 |
|---|---|---|
| committer | Robert Marko | 2025-01-18 15:09:32 +0000 |
| commit | 2d077913cd53cad33123c8a9bf6da8a1c5576c69 (patch) | |
| tree | 7578d9435b58a3586fff073cd8b5981c8aae330f | |
| parent | 45aafe67f385a2b6cf65894b2f46ee8e33d87f92 (diff) | |
| download | openwrt-2d077913cd53cad33123c8a9bf6da8a1c5576c69.tar.gz | |
qualcommax: dl-wrx36: fix 2.5G port LED-s
Currently, 2.5G port LED-s on Dynalink are incorrectly configured and thus
they will light up all of the time.
So, lets fix this by:
1. Current green LED is actually yellow, change the color
2. Fix its polarity as its actually active-low
3. The yellow LED that was registered as being connected to LED_1 pin on
the PHY is not actually connected at all, so remove it.
4. The actual green LED is connected to LED_2 on the PHY so add it.
Fixes: 75ad5c24142a ("qualcommax: switch to qca8081 upstream PHY driver")
Fixes: #14502
Link: https://github.com/openwrt/openwrt/pull/17656
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts index c5c089c00f..d25bc90153 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts @@ -178,14 +178,15 @@ led@0 { reg = <0>; - color = <LED_COLOR_ID_GREEN>; + color = <LED_COLOR_ID_YELLOW>; function = LED_FUNCTION_WAN; default-state = "keep"; + active-low; }; - led@1 { - reg = <1>; - color = <LED_COLOR_ID_YELLOW>; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_WAN; default-state = "keep"; }; |