ath79: add support for Yuncore A930
authorThibaut VARÈNE <hacks@slashdirt.org>
Thu, 14 Apr 2022 10:39:05 +0000 (12:39 +0200)
committerPetr Štetiar <ynezz@true.cz>
Fri, 15 Apr 2022 06:14:50 +0000 (08:14 +0200)
Specification:

- QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR
- 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN)
- 2T2R 802.11b/g/n 2.4GHz

Flash instructions:

If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):

  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
  sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin

In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:

1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
   'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
   seconds, recovery mode should start downloading image from server
   (unfortunately, there is no visible indication that recovery got
   enabled - in case of problems check TFTP server logs)

Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry picked from commit a05dcb07241aa83a4416b56201e31b4af8518981)

package/boot/uboot-envtools/files/ath79
target/linux/ath79/dts/qca9533_yuncore_a930.dts [new file with mode: 0644]
target/linux/ath79/image/generic.mk

index ace5cab30fd46ea621e1d59948033422def1e80e..c69a7c292c3dc59c4ae95eccad390adff9f3d425 100644 (file)
@@ -69,6 +69,7 @@ samsung,wam250|\
 ubnt,nanostation-m|\
 yuncore,a770|\
 yuncore,a782|\
+yuncore,a930|\
 yuncore,xd3200|\
 yuncore,xd4200|\
 ziking,cpe46b|\
diff --git a/target/linux/ath79/dts/qca9533_yuncore_a930.dts b/target/linux/ath79/dts/qca9533_yuncore_a930.dts
new file mode 100644 (file)
index 0000000..089eeba
--- /dev/null
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "yuncore,a930", "qca,qca9533";
+       model = "YunCore A930";
+
+       aliases {
+               label-mac-device = &eth1;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_system: system {
+                       label = "green:system";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+
+               wlan2g {
+                       label = "blue:wlan2g";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x050000 0xfa0000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+       nvmem-cells = <&macaddr_art_6>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+};
+
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_art_0: macaddr@0 {
+               reg = <0x0 0x6>;
+       };
+
+       macaddr_art_6: macaddr@6 {
+               reg = <0x6 0x6>;
+       };
+};
index 33a72358b3ac6b33535fa901213431874af2bee6..dc85fb60bfb81297bc00f98ae7ceafd188cc1d63 100644 (file)
@@ -2528,6 +2528,16 @@ define Device/yuncore_a782
 endef
 TARGET_DEVICES += yuncore_a782
 
+define Device/yuncore_a930
+  SOC := qca9533
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := A930
+  IMAGE_SIZE := 16000k
+  IMAGES += tftp.bin
+  IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
+endef
+TARGET_DEVICES += yuncore_a930
+
 define Device/yuncore_xd3200
   SOC := qca9563
   DEVICE_VENDOR := YunCore