diff options
| author | Marcin Leksmark | 2025-09-11 14:40:20 +0000 |
|---|---|---|
| committer | Hauke Mehrtens | 2025-11-20 22:46:27 +0000 |
| commit | 485f9b0d31fb406f3f4f0f4327cd6320443e550e (patch) | |
| tree | 1a7f3cc1131bd09e7079a241cd4924a53f971b4f | |
| parent | f9eaa1cf1f3bb4e6904b629ecc03e93534c67f2a (diff) | |
| download | openwrt-485f9b0d31fb406f3f4f0f4327cd6320443e550e.tar.gz | |
ramips: add support for D-Link DIR-2660 A2
This patch adds support for D-Link DIR-2660 A2.
Based on the commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b5dd746cbb1aaf91f4b68e9f3eda97413550d904,
Both devices look identical, except for the A1/A2 designation.
You can safely install the A1 firmware for the A2 – I've been testing it for several months as a DUMB AP – without any problems.
Specifications:
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 2.0, 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white),
WiFi 5G (white), USB 3.0 (white), USB 2.0 (white)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
Signed-off-by: Marcin Leksmark <lexmark3200@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20020
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a957b5721e..6b4dd01a28 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1006,6 +1006,9 @@ define Device/dlink_dir-2660-a1 $(Device/dlink_dir_nand_128m) DEVICE_MODEL := DIR-2660 DEVICE_VARIANT := A1 + DEVICE_ALT0_VENDOR := D-Link + DEVICE_ALT0_MODEL := DIR-2660 + DEVICE_ALT0_VARIANT := A2 endef TARGET_DEVICES += dlink_dir-2660-a1 |