qualcommax: remove PCIe bridge nodes

PCIe bridge nodes are now present in the SoC DTSI, so drop our downstream
ones as otherwise ath1*k BDF matching will fail.

Link: https://github.com/openwrt/openwrt/pull/18789
Signed-off-by: Robert Marko <robimarko@gmail.com>

11 files changed, 12 insertions, 87 deletions

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr5500.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr5500.dts
index 99bd9a71a2..a11d033a96 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr5500.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr5500.dts
@@ -307,12 +307,7 @@
 
 	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts
index 4792ed5d43..04bb6fc79a 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts
@@ -154,12 +154,7 @@
 
 	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
index d25ff0f1cb..a9c04176ec 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-spnmx56.dts
@@ -165,12 +165,7 @@
 
 	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-xe3-4.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-xe3-4.dts
index 9aa201ab6b..5399ee387c 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-xe3-4.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-xe3-4.dts
@@ -155,12 +155,7 @@
 	status = "okay";
 	perst-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-mr7500.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-mr7500.dts
index 9cfd3a5239..46382582e3 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-mr7500.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-mr7500.dts
@@ -521,12 +521,8 @@
 
 &pcie0 {
 	status = "okay";
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-		
+
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 			/* ath11k has no DT compatible for PCI cards */
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
index c6889df25d..8236d98d3c 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
@@ -50,12 +50,7 @@
 
 	perst-gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi0: wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
index ec66d47d16..00a96fbdba 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
@@ -535,12 +535,7 @@
 
 	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
@@ -562,12 +557,7 @@
 
 	perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;
 
-	bridge@1,0 {
-		reg = <0x00010000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
index 289680d678..231a38f2c4 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts
@@ -281,13 +281,6 @@
 	status = "okay";
 
 	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00020000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-	};
 };
 
 &pcie_qmp1 {
@@ -299,12 +292,7 @@
 
 	perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
 
-	bridge@1,0 {
-		reg = <0x00010000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts
index 9d28f2ad0d..8aae541507 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts
@@ -522,12 +522,7 @@
 
 	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi0: wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx8500.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx8500.dts
index 70f4438ab0..4d5471153e 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx8500.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx8500.dts
@@ -498,12 +498,7 @@
 
 	perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
 
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
+	pcie@0 {
 		wifi@1,0 {
 			status = "okay";
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts
index 5b2c1d570f..51c4ac99dd 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts
@@ -451,13 +451,6 @@
 	status = "okay";
 
 	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00020000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-	};
 };
 
 &pcie_qmp1 {
@@ -468,13 +461,6 @@
 	status = "okay";
 
 	perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;
-
-	bridge@1,0 {
-		reg = <0x00010000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-	};
 };
 
 &wifi {