diff options
| author | Rosen Penev | 2025-05-26 01:26:22 +0000 |
|---|---|---|
| committer | Robert Marko | 2025-08-25 08:21:33 +0000 |
| commit | 48c7a40745c076fb5b237b38b3cc2ec314b15f3e (patch) | |
| tree | a50897519d38a17f7fd96828d3c4fb53f85da446 | |
| parent | 5eef79a249017eafec422117412bc72a320edfe6 (diff) | |
| download | openwrt-48c7a40745c076fb5b237b38b3cc2ec314b15f3e.tar.gz | |
ath79: iodata: set ath9k LED pin
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
Set the pcie device to qcom,ath10k as the Documentation says, The pci
line implies it's ath9k when it's actually ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18873
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts | 11 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi | 13 |
2 files changed, 11 insertions, 13 deletions
diff --git a/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts b/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts index 6eb072ef2f..6e4ec5cbfe 100644 --- a/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts +++ b/target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts @@ -40,12 +40,6 @@ gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - wlan2g { - label = "green:wlan2g"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - wlan5g { label = "green:wlan5g"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; @@ -219,4 +213,9 @@ nvmem-cells = <&cal_art_1000>; nvmem-cell-names = "calibration"; + + led { + led-sources = <12>; + led-active-low; + }; }; diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi index bc05ec559a..690e0918d9 100644 --- a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi +++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi @@ -35,12 +35,6 @@ linux,default-trigger = "phy0tpt"; }; - wlan2g { - label = "green:wlan2g"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - notification { label = "amber:notification"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; @@ -185,7 +179,7 @@ status = "okay"; wifi@0,0 { - compatible = "pci168c,003c"; + compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>; nvmem-cell-names = "calibration"; @@ -205,4 +199,9 @@ nvmem-cells = <&cal_art_1000>; nvmem-cell-names = "calibration"; + + led { + led-sources = <22>; + led-active-low; + }; }; |