kernel: Move an upstreamed patch under backports

This CFI patch was accepted upstream for 5.13. Move it away from under
ath79 and place under backports to be removed in due time.

Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>

diff --git a/target/linux/ath79/patches-5.10/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch b/target/linux/ath79/patches-5.10/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch
deleted file mode 100644 (file)
index 35ea92a..0000000
--- a/target/linux/ath79/patches-5.10/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From f1f811410af297c848e9ec17eaa280d190fdce10 Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <sandberg@mailfence.com>
-Date: Tue, 23 Feb 2021 18:09:31 +0200
-Subject: [PATCH] mtd: cfi_cmdset_0002: AMD chip 0x2201 - write words
-
-Buffer writes do not work with AMD chip 0x2201. The chip in question
-is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
-talks about writing buffers being possible. While waiting for a neater
-solution resort to writing word-sized chunks only.
-
-Without the patch kernel logs will be flooded with entries like below:
-
-jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
-jffs2_build_filesystem(): unlocking the mtd device...
-done.
-jffs2_build_filesystem(): erasing all blocks after the end marker...
-MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
-jffs2: Write clean marker to block at 0x01920000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
-jffs2: Write clean marker to block at 0x01880000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
-jffs2: Write clean marker to block at 0x01860000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
-jffs2: Write clean marker to block at 0x01820000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
-jffs2: Write clean marker to block at 0x01800000 failed: -5
-...
-
-Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
-
-[1] https://www.cypress.com/file/219941/download
-or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
-
-Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru
- {
-       struct map_info *map = mtd->priv;
-       struct cfi_private *cfi = map->fldrv_priv;
-+
-+      if ((cfi->mfr == CFI_MFR_AMD) && (cfi->id == 0x2201))
-+              return;
-+
-       if (cfi->cfiq->BufWriteTimeoutTyp) {
-               pr_debug("Using buffer write method\n");
-               mtd->_write = cfi_amdstd_write_buffers;

diff --git a/target/linux/ath79/patches-5.4/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch b/target/linux/ath79/patches-5.4/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch
deleted file mode 100644 (file)
index 35ea92a..0000000
--- a/target/linux/ath79/patches-5.4/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From f1f811410af297c848e9ec17eaa280d190fdce10 Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <sandberg@mailfence.com>
-Date: Tue, 23 Feb 2021 18:09:31 +0200
-Subject: [PATCH] mtd: cfi_cmdset_0002: AMD chip 0x2201 - write words
-
-Buffer writes do not work with AMD chip 0x2201. The chip in question
-is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
-talks about writing buffers being possible. While waiting for a neater
-solution resort to writing word-sized chunks only.
-
-Without the patch kernel logs will be flooded with entries like below:
-
-jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
-jffs2_build_filesystem(): unlocking the mtd device...
-done.
-jffs2_build_filesystem(): erasing all blocks after the end marker...
-MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
-jffs2: Write clean marker to block at 0x01920000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
-jffs2: Write clean marker to block at 0x01880000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
-jffs2: Write clean marker to block at 0x01860000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
-jffs2: Write clean marker to block at 0x01820000 failed: -5
-MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
-jffs2: Write clean marker to block at 0x01800000 failed: -5
-...
-
-Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
-
-[1] https://www.cypress.com/file/219941/download
-or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
-
-Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru
- {
-       struct map_info *map = mtd->priv;
-       struct cfi_private *cfi = map->fldrv_priv;
-+
-+      if ((cfi->mfr == CFI_MFR_AMD) && (cfi->id == 0x2201))
-+              return;
-+
-       if (cfi->cfiq->BufWriteTimeoutTyp) {
-               pr_debug("Using buffer write method\n");
-               mtd->_write = cfi_amdstd_write_buffers;

diff --git a/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch b/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
new file mode 100644 (file)
index 0000000..3af641e
--- /dev/null
+++ b/target/linux/generic/backport-5.10/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
@@ -0,0 +1,54 @@
+From 7e4404113686868858a34210c28ae122e967aa64 Mon Sep 17 00:00:00 2001
+From: Mauri Sandberg <sandberg@mailfence.com>
+Date: Tue, 9 Mar 2021 19:48:59 +0200
+Subject: [PATCH] mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip
+ 0x2201
+
+Buffer writes do not work with AMD chip 0x2201. The chip in question
+is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
+talks about writing buffers being possible. While waiting for a neater
+solution resort to writing word-sized chunks only.
+
+Without the patch kernel logs will be flooded with entries like below:
+
+jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
+jffs2_build_filesystem(): unlocking the mtd device...
+done.
+jffs2_build_filesystem(): erasing all blocks after the end marker...
+MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
+jffs2: Write clean marker to block at 0x01920000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
+jffs2: Write clean marker to block at 0x01880000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
+jffs2: Write clean marker to block at 0x01860000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
+jffs2: Write clean marker to block at 0x01820000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
+jffs2: Write clean marker to block at 0x01800000 failed: -5
+...
+
+Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
+
+[1] https://www.cypress.com/file/219941/download
+or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
+
+Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
+Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
+Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru
+ {
+       struct map_info *map = mtd->priv;
+       struct cfi_private *cfi = map->fldrv_priv;
++
++      if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201)
++              return;
++
+       if (cfi->cfiq->BufWriteTimeoutTyp) {
+               pr_debug("Using buffer write method\n");
+               mtd->_write = cfi_amdstd_write_buffers;

diff --git a/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch b/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
new file mode 100644 (file)
index 0000000..3af641e
--- /dev/null
+++ b/target/linux/generic/backport-5.4/408-v5.13-mtd-cfi_cmdset_0002-Disable-buffered-writes-for-AMD.patch
@@ -0,0 +1,54 @@
+From 7e4404113686868858a34210c28ae122e967aa64 Mon Sep 17 00:00:00 2001
+From: Mauri Sandberg <sandberg@mailfence.com>
+Date: Tue, 9 Mar 2021 19:48:59 +0200
+Subject: [PATCH] mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip
+ 0x2201
+
+Buffer writes do not work with AMD chip 0x2201. The chip in question
+is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1]
+talks about writing buffers being possible. While waiting for a neater
+solution resort to writing word-sized chunks only.
+
+Without the patch kernel logs will be flooded with entries like below:
+
+jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
+jffs2_build_filesystem(): unlocking the mtd device...
+done.
+jffs2_build_filesystem(): erasing all blocks after the end marker...
+MTD do_write_buffer_wait(): software timeout, address:0x01ec000a.
+jffs2: Write clean marker to block at 0x01920000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01e2000a.
+jffs2: Write clean marker to block at 0x01880000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01e0000a.
+jffs2: Write clean marker to block at 0x01860000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01dc000a.
+jffs2: Write clean marker to block at 0x01820000 failed: -5
+MTD do_write_buffer_wait(): software timeout, address:0x01da000a.
+jffs2: Write clean marker to block at 0x01800000 failed: -5
+...
+
+Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16.
+
+[1] https://www.cypress.com/file/219941/download
+or  https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1
+
+Signed-off-by: Mauri Sandberg <sandberg@mailfence.com>
+Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
+Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(stru
+ {
+       struct map_info *map = mtd->priv;
+       struct cfi_private *cfi = map->fldrv_priv;
++
++      if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201)
++              return;
++
+       if (cfi->cfiq->BufWriteTimeoutTyp) {
+               pr_debug("Using buffer write method\n");
+               mtd->_write = cfi_amdstd_write_buffers;

diff --git a/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
index 659a6386aef8ba6d19533caa49d0b5c1cf8ee71a..9983971af5b4935c2dfdd14ebe79b81422023540 100644 (file)
--- a/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ b/target/linux/generic/pending-5.10/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -909,7 +909,7 @@ static int get_chip(struct map_info *map
+@@ -913,7 +913,7 @@ static int get_chip(struct map_info *map
                return 0;
  
        case FL_ERASING:

diff --git a/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
index 79276b1b87945f04692299974d9ae3a71818ab2c..0bda2ed971c0ad5cff867d561a12c5cfb661f980 100644 (file)
--- a/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ b/target/linux/generic/pending-5.10/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
@@ -7,7 +7,7 @@ Signed-off-by: George Kashperko <george@znau.edu.ua>
  1 file changed, 1 insertion(+)
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2053,6 +2053,7 @@ static int __xipram do_write_buffer(stru
+@@ -2057,6 +2057,7 @@ static int __xipram do_write_buffer(stru
  
        /* Write Buffer Load */
        map_write(map, CMD(0x25), cmd_adr);

diff --git a/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
index 659a6386aef8ba6d19533caa49d0b5c1cf8ee71a..9983971af5b4935c2dfdd14ebe79b81422023540 100644 (file)
--- a/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ b/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -909,7 +909,7 @@ static int get_chip(struct map_info *map
+@@ -913,7 +913,7 @@ static int get_chip(struct map_info *map
                return 0;
  
        case FL_ERASING:

diff --git a/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
index 8d2195e13324316c6222e5d3ff2074d7da3e3f00..bedd53ccbaee685d38c6153455310c5bc05716bb 100644 (file)
--- a/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ b/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
@@ -7,7 +7,7 @@ Signed-off-by: George Kashperko <george@znau.edu.ua>
  1 file changed, 1 insertion(+)
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2054,6 +2054,7 @@ static int __xipram do_write_buffer(stru
+@@ -2058,6 +2058,7 @@ static int __xipram do_write_buffer(stru
  
        /* Write Buffer Load */
        map_write(map, CMD(0x25), cmd_adr);