diff options
| author | Sven Huang | 2024-06-01 03:53:31 +0000 |
|---|---|---|
| committer | Hauke Mehrtens | 2024-06-16 22:01:51 +0000 |
| commit | 5560791bbd6d6c90ba6c96558445e851e8581eba (patch) | |
| tree | a25ac67899287bf4986114c9014dc0617754b2ef | |
| parent | 2da2705a441a0cfbfec10bbae5bd76e889dc3266 (diff) | |
| download | openwrt-5560791bbd6d6c90ba6c96558445e851e8581eba.tar.gz | |
ramips: add support for OpenFi 5Pro Travel Router
OpenFi 5Pro is a DualBand Travel Router, based on MT7621A.
Specification:
- Type : Travel Wi-Fi Router(built-in Type-C Power Cable)
- Size : 63 x 93 x 24mm
- Power : Internal Type-C Cable PD/DC 5V@2A
- SoC : MediaTek MT7621A
- RAM : DDR3 512 MB
- Flash : SPI-NOR 64MB (W25Q512)
- WLAN : 2.4/5GHz 2T2R (MediaTek MT7603e/MT7613)
- Ethernet : 2x 10/100/1000Mbps
- USB : 1 x USB 2.0
- SDHCI : 1 x TF Slot (Max 512GB)
- LEDs : 3 x LEDs (GPIO#16 gpio#17 gpio#14)
- Button : 1 x Reset (GPIO#18), 1 x WPS (GPIO#13)
- UART : 1 x UART for Debug, 115200 8N1 (Pinout: GND TX RX 3.3V)
- UART 2 : 1xUART2 (Pinout: GND TX2 RX2 3.3V )
How to upgrade image in uboot
1. press reset button when boot for 5sec.
2. access 192.168.21.1 in web ui.
3. select image and upload
Signed-off-by: Sven Huang <1036456939@qq.com>
| -rwxr-xr-x | target/linux/ramips/dts/mt7621_openfi_5pro.dts | 188 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 10 | ||||
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 1 |
3 files changed, 199 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_openfi_5pro.dts b/target/linux/ramips/dts/mt7621_openfi_5pro.dts new file mode 100755 index 0000000000..0ac503207c --- /dev/null +++ b/target/linux/ramips/dts/mt7621_openfi_5pro.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "openfi,5pro", "mediatek,mt7621-soc";
+ model = "OpenFi 5Pro";
+
+ aliases {
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_blue;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_blue;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN_ONLINE;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ linux,default-trigger = "phy0tpt";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ broken-flash-reset;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x4da8>;
+ };
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
+ };
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3fb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+ status = "okay";
+ label = "wan";
+ phy-handle = <ðphy0>;
+
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+ðphy0 {
+ /delete-property/ interrupts;
+};
+
+&switch0 {
+ ports {
+ port@1 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index ef374d6f4d..13b6a51966 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2148,6 +2148,16 @@ define Device/netis_wf2881 endef TARGET_DEVICES += netis_wf2881 +define Device/openfi_5pro + $(Device/dsa-migration) + IMAGE_SIZE := 65216k + DEVICE_VENDOR := OpenFi + DEVICE_MODEL := 5Pro + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb3 \ + kmod-sdhci-mt7620 +endef +TARGET_DEVICES += openfi_5pro + define Device/oraybox_x3a $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 247a27d145..386a3bb41d 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -66,6 +66,7 @@ ramips_setup_interfaces() ;; asiarf,ap7621-001|\ humax,e10|\ + openfi,5pro|\ wavlink,ws-wn572hp3-4g|\ winstars,ws-wn583a6) ucidef_set_interfaces_lan_wan "lan" "wan" |