luci-app-advanced-reboot: show OpenWrt info on compatible NAND routers 3312/head
authorStan Grishin <stangri@melmac.net>
Fri, 15 Nov 2019 23:41:58 +0000 (16:41 -0700)
committerStan Grishin <stangri@melmac.net>
Fri, 15 Nov 2019 23:41:58 +0000 (16:41 -0700)
Signed-off-by: Stan Grishin <stangri@melmac.net>
applications/luci-app-advanced-reboot/Makefile
applications/luci-app-advanced-reboot/README.md
applications/luci-app-advanced-reboot/luasrc/controller/advanced_reboot.lua
applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/advanced_reboot.htm
applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/alternative_reboot.htm
applications/luci-app-advanced-reboot/root/etc/uci-defaults/40_luci-advanced-reboot [new file with mode: 0644]

index 329acece4fcab625e905831045b0ec93a22e3d2c..a08d57fd8b12425a9e3074d07c1210def7a2997f 100644 (file)
@@ -3,7 +3,7 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_LICENSE:=GPL-3.0+
+PKG_LICENSE:=GPL-3.0-or-later
 PKG_MAINTAINER:=Stan Grishin <stangri@melmac.net>
 
 LUCI_TITLE:=Advanced Linksys Reboot Web UI
@@ -11,9 +11,9 @@ LUCI_DESCRIPTION:=Provides Web UI (found under System/Advanced Reboot) to reboot
        an alternative partition. Also provides Web UI to shut down (power off) your device.    Supported dual-partition\
        routers are listed at https://github.com/openwrt/luci/blob/master/applications/luci-app-advanced-reboot/README.md
 
-LUCI_DEPENDS:=+luci-mod-admin-full
+LUCI_DEPENDS:=+luci-compat +luci-mod-admin-full
 LUCI_PKGARCH:=all
-PKG_RELEASE:=42
+PKG_RELEASE:=43
 
 include ../../luci.mk
 
index 61e43637d1dcd6f4905e5dfd6e384cccf40bc089..50ca1bc2d6868d3382aca32405a7d6fec3c2f304 100644 (file)
@@ -22,11 +22,11 @@ Currently supported dual-partition devices include:
 - Linksys WRT32X
 - ZyXEL NBG6817
 
-If you're interested in having your device supported, please post in [OpenWrt Forum Support Thread](https://forum.openwrt.org/t/web-ui-to-reboot-to-another-partition-dual-partition-routers/3423).
+If your device is not in the list above, however it is a [dual-firmware device](https://openwrt.org/tag/dual_firmware?do=showtag&tag=dual_firmware) and you're interested in having your device supported, please post in [OpenWrt Forum Support Thread](https://forum.openwrt.org/t/web-ui-to-reboot-to-another-partition-dual-partition-routers/3423).
 
 ## Screenshot (luci-app-advanced-reboot)
 
-![screenshot](https://raw.githubusercontent.com/stangri/openwrt_packages/master/screenshots/luci-app-advanced-reboot/screenshot01.png "screenshot")
+![screenshot](https://raw.githubusercontent.com/stangri/openwrt_packages/master/screenshots/luci-app-advanced-reboot/screenshot02.png "screenshot")
 
 ## How to install
 
index 6b8cba4c4096f66de0ca987853c909b40335688e..8b97f2e560b7b1eddcffd2f58a89c77b5b162fe5 100644 (file)
 
 module("luci.controller.advanced_reboot", package.seeall)
 
+local util = require "luci.util"
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
+local http = require "luci.http"
+local dispatcher = require "luci.dispatcher"
+local i18n = require "luci.i18n"
+local ltemplate = require "luci.template"
+local ip = require "luci.ip"
+local http = require "luci.http"
+local sys = require "luci.sys"
+local dispatcher = require "luci.dispatcher"
+local uci = require "luci.model.uci".cursor()
+
+function is_alt_mountable(p1_mtd, p2_mtd)
+       if p1_mtd:sub(1,3) == "mtd" and
+                                p2_mtd:sub(1,3) == "mtd" and
+                                fs.access("/usr/sbin/ubiattach") and
+                                fs.access("/usr/sbin/ubiblock") and 
+                                fs.access("/bin/mount") then
+               return true
+       else
+               return false
+       end
+end
+
+function get_partition_os_info(op_ubi)
+       local cp_info, ap_info
+       if fs.access("/etc/os-release") then
+               cp_info = util.trim(util.exec('. /etc/os-release && echo "$PRETTY_NAME"'))
+       end
+       alt_partition_unmount(op_ubi)
+       alt_partition_mount(op_ubi)
+       if fs.access("/alt/rom/etc/os-release") then
+               ap_info = util.trim(util.exec('. /alt/rom/etc/os-release && echo "$PRETTY_NAME"'))
+       end
+       alt_partition_unmount(op_ubi)
+       return cp_info, ap_info
+end
+
+function alt_partition_mount(op_ubi)
+       local ubi_dev
+       util.exec('for i in rom overlay firmware; do [ ! -d "$i" ] && mkdir -p "/alt/${i}"; done')
+       util.exec("ubidetach -m " .. tostring(op_ubi))
+       ubi_dev = tostring(util.exec("ubiattach -m " .. tostring(op_ubi)))
+       _, _, ubi_dev = ubi_dev:find("UBI device number (%d+)")
+       if not ubi_dev then 
+               util.exec("ubidetach -m " .. tostring(op_ubi))
+               return 
+       end
+       util.exec("ubiblock --create /dev/ubi" .. ubi_dev .. "_0")
+       util.exec("mount -t squashfs -o ro /dev/ubiblock" .. ubi_dev .. "_0 /alt/rom")
+       util.exec("mount -t ubifs /dev/ubi1_" .. ubi_dev .. " /alt/overlay")
+       util.exec("mount -t overlay overlay -o noatime,lowerdir=/alt/rom,upperdir=/alt/overlay/upper,workdir=/alt/overlay/work /alt/firmware")
+end
+
+function alt_partition_unmount(op_ubi)
+       util.exec("umount /alt/firmware")
+       util.exec("umount /alt/overlay")
+       util.exec("umount /alt/rom")
+       util.exec("ubiblock --remove /dev/ubi1_0")
+       util.exec("ubidetach -m " .. tostring(op_ubi))
+       util.exec('rm -rf /alt')
+end
+
 devices = {
-  -- deviceName, boardName, partition1, partition2, offset, envVar1, envVar1Value1, envVar1Value2, envVar2, envVar2Value1, envVar2Value2
-  {"Linksys EA3500", "linksys-audi", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys EA6350v3", "linksys-ea6350v3", "mtd10", "mtd12", 192, "boot_part", 1, 2},
-  {"Linksys EA8300", "linksys-ea8300", "mtd10", "mtd12", 192, "boot_part", 1, 2},
-  {"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2},
+       -- deviceName, boardName, part1MTD, part2MTD, offset, envVar1, envVar1Value1, envVar1Value2, envVar2, envVar2Value1, envVar2Value2
+       {"Linksys EA3500", "linksys-audi", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys EA6350v3", "linksys-ea6350v3", "mtd10", "mtd12", 192, "boot_part", 1, 2},
+       {"Linksys EA8300", "linksys-ea8300", "mtd10", "mtd12", 192, "boot_part", 1, 2},
+       {"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2},
 --  {"Linksys EA9500", "linksys-panamera", "mtd3", "mtd6", 28, "boot_part", 1, 2},
-  {"Linksys WRT1200AC", "linksys-caiman", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys WRT1900AC", "linksys-mamba", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys WRT1900ACv2", "linksys-cobra", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys WRT1900ACS", "linksys-shelby", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys WRT3200ACM", "linksys-rango", "mtd5", "mtd7", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys WRT32X", "linksys-venom", "mtd5", "mtd7", nil, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"ZyXEL NBG6817","nbg6817","mmcblk0p4","mmcblk0p7", 32, nil, 255, 1}
+       {"Linksys WRT1200AC", "linksys-caiman", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys WRT1900AC", "linksys-mamba", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys WRT1900ACv2", "linksys-cobra", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys WRT1900ACS", "linksys-shelby", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys WRT3200ACM", "linksys-rango", "mtd5", "mtd7", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"Linksys WRT32X", "linksys-venom", "mtd5", "mtd7", nil, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+       {"ZyXEL NBG6817", "nbg6817", "mmcblk0p4", "mmcblk0p7", 32, nil, 255, 1}
 }
 
-errorMessage = nil
-rom_board_name = luci.util.trim(luci.sys.exec("cat /tmp/sysinfo/board_name"))
+-- local errorMessage, d
+-- local device_name, p1_mtd, p2_mtd, offset, bev1, bev1p1, bev1p2, bev2, bev2p1, bev2p2
+romBoardName = util.trim(util.exec("cat /tmp/sysinfo/board_name"))
+
 for i=1, #devices do
-  device_board_name = devices[i][2]:gsub('%p','')
-  if rom_board_name and rom_board_name:gsub('%p',''):match(device_board_name) then
-    device_name = devices[i][1]
-    partition_one_mtd = devices[i][3] or nil
-    partition_two_mtd = devices[i][4] or nil
-    partition_skip = devices[i][5] or nil
-    boot_envvar1 = devices[i][6] or nil
-    boot_envvar1_partition_one = tonumber(devices[i][7]) or nil
-    boot_envvar1_partition_two = tonumber(devices[i][8]) or nil
-    boot_envvar2 = devices[i][9] or nil
-    boot_envvar2_partition_one = devices[i][10] or nil
-    boot_envvar2_partition_two = devices[i][11] or nil
-    if partition_one_mtd and partition_skip then
-      partition_one_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_one_mtd .. " bs=1 skip=" .. partition_skip .. " count=128" .. "  2>/dev/null"))
-      n, partition_one_version = string.match(partition_one_label, '(Linux)-([%d|.]+)')
-    end
-    if partition_two_mtd and partition_skip then
-      partition_two_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_two_mtd .. " bs=1 skip=" .. partition_skip .. " count=128" .. "  2>/dev/null"))
-      n, partition_two_version = string.match(partition_two_label, '(Linux)-([%d|.]+)')
-    end
-    if partition_one_label and string.find(partition_one_label, "LEDE") then partition_one_os = "LEDE" end
-    if partition_one_label and string.find(partition_one_label, "OpenWrt") then partition_one_os = "OpenWrt" end
-    if partition_one_label and string.find(partition_one_label, "Linksys") then partition_one_os = "Linksys" end
-    if partition_two_label and string.find(partition_two_label, "LEDE") then partition_two_os = "LEDE" end
-    if partition_two_label and string.find(partition_two_label, "OpenWrt") then partition_two_os = "OpenWrt" end
-    if partition_two_label and string.find(partition_two_label, "Linksys") then partition_two_os = "Linksys" end
-    if device_name and device_name == "ZyXEL NBG6817" then
-      if not partition_one_os then partition_one_os = "ZyXEL" end
-      if not partition_two_os then partition_two_os = "ZyXEL" end
-    end
-    if device_name and device_name == "Linksys WRT32X" then
-      if not partition_one_os then partition_one_os = "Unknown/Compressed" end
-      if not partition_two_os then partition_two_os = "Unknown/Compressed" end
-    end
-    if not partition_one_os then partition_one_os = "Unknown" end
-    if not partition_two_os then partition_two_os = "Unknown" end
-    if partition_one_os and partition_one_version then partition_one_os = partition_one_os .. " (Linux " .. partition_one_version .. ")" end
-    if partition_two_os and partition_two_version then partition_two_os = partition_two_os .. " (Linux " .. partition_two_version .. ")" end
+       d = devices[i][2]:gsub('%p','')
+       if romBoardName and romBoardName:gsub('%p',''):match(d) then
+               device_name = devices[i][1]
+               p1_mtd = devices[i][3] or nil
+               p2_mtd = devices[i][4] or nil
+               offset = devices[i][5] or nil
+               bev1 = devices[i][6] or nil
+               bev1p1 = tonumber(devices[i][7]) or nil
+               bev1p2 = tonumber(devices[i][8]) or nil
+               bev2 = devices[i][9] or nil
+               bev2p1 = devices[i][10] or nil
+               bev2p2 = devices[i][11] or nil
+               if p1_mtd and offset then
+                       p1_label = util.trim(util.exec("dd if=/dev/" .. p1_mtd .. " bs=1 skip=" .. offset .. " count=128" .. "  2>/dev/null"))
+                       n, p1_version = p1_label:match('(Linux)-([%d|.]+)')
+               end
+               if p2_mtd and offset then
+                       p2_label = util.trim(util.exec("dd if=/dev/" .. p2_mtd .. " bs=1 skip=" .. offset .. " count=128" .. "  2>/dev/null"))
+                       n, p2_version = p2_label:match('(Linux)-([%d|.]+)')
+               end
+               if p1_label and p1_label:find("LEDE") then p1_os = "LEDE" end
+               if p1_label and p1_label:find("OpenWrt") then p1_os = "OpenWrt" end
+               if p1_label and p1_label:find("Linksys") then p1_os = "Linksys" end
+               if p2_label and p2_label:find("LEDE") then p2_os = "LEDE" end
+               if p2_label and p2_label:find("OpenWrt") then p2_os = "OpenWrt" end
+               if p2_label and p2_label:find("Linksys") then p2_os = "Linksys" end
+               if device_name == "ZyXEL NBG6817" then
+                       if not p1_os then p1_os = "ZyXEL" end
+                       if not p2_os then p2_os = "ZyXEL" end
+               end
+               if device_name == "Linksys WRT32X" then
+                       if not p1_os then p1_os = "Unknown/Compressed" end
+                       if not p2_os then p2_os = "Unknown/Compressed" end
+               end
+               if not p1_os then p1_os = "Unknown" end
+               if not p2_os then p2_os = "Unknown" end
+               if p1_os and p1_version then p1_os = p1_os .. " (Linux " .. p1_version .. ")" end
+               if p2_os and p2_version then p2_os = p2_os .. " (Linux " .. p2_version .. ")" end
 
-    if device_name and device_name == "ZyXEL NBG6817" then
-      if not zyxelFlagPartition then zyxelFlagPartition = luci.util.trim(luci.sys.exec("source /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
-      if not zyxelFlagPartition then
-        errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
-        luci.util.perror(luci.i18n.translate("Unable to find Dual Boot Flag Partition."))
-      else
-        current_partition = tonumber(luci.sys.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
-      end
-    else
-      if nixio.fs.access("/usr/sbin/fw_printenv") and nixio.fs.access("/usr/sbin/fw_setenv") then
-        current_partition = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1)))
-      end
-    end
-    other_partition = current_partition == boot_envvar1_partition_two and boot_envvar1_partition_one or boot_envvar1_partition_two
-  end
+               if device_name == "ZyXEL NBG6817" then
+                       if not zyxelFlagPartition then zyxelFlagPartition = util.trim(util.exec(". /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
+                       if not zyxelFlagPartition then
+                               errorMessage = errorMessage or "" .. i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
+                               util.perror(i18n.translate("Unable to find Dual Boot Flag Partition."))
+                       else
+                               current_partition = tonumber(util.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
+                       end
+               else
+                       if fs.access("/usr/sbin/fw_printenv") and fs.access("/usr/sbin/fw_setenv") then
+                               current_partition = tonumber(util.trim(util.exec("fw_printenv -n " .. bev1)))
+                       end
+               end
+               other_partition = current_partition == bev1p2 and bev1p1 or bev1p2
+               
+               if is_alt_mountable(p1_mtd, p2_mtd) then
+                       if current_partition == bev1p1 then
+                               op_ubi = tonumber(p2_mtd:sub(4)) + 1
+                       else
+                               op_ubi = tonumber(p1_mtd:sub(4)) + 1
+                       end
+                       local cp_info, ap_info = get_partition_os_info(op_ubi)
+                       if current_partition == bev1p1 then
+                               p1_os = cp_info or p1_os
+                               p2_os = ap_info or p2_os
+                       else
+                               p1_os = ap_info or p1_os
+                               p2_os = cp_info or p2_os
+                       end
+               end
+       end
 end
 
 function index()
-  entry({"admin", "system", "advanced_reboot"}, template("advanced_reboot/advanced_reboot"), _("Advanced Reboot"), 90)
-  entry({"admin", "system", "advanced_reboot", "reboot"}, post("action_reboot"))
-  entry({"admin", "system", "advanced_reboot", "alternative_reboot"}, post("action_altreboot"))
-  entry({"admin", "system", "advanced_reboot", "power_off"}, post("action_poweroff"))
+       entry({"admin", "system", "advanced_reboot"}, template("advanced_reboot/advanced_reboot"), _("Advanced Reboot"), 90)
+       entry({"admin", "system", "advanced_reboot", "reboot"}, post("action_reboot"))
+       entry({"admin", "system", "advanced_reboot", "alternative_reboot"}, post("action_altreboot"))
+       entry({"admin", "system", "advanced_reboot", "power_off"}, post("action_poweroff"))
 end
 
 function action_reboot()
-  local uci = require "luci.model.uci".cursor()
-  local ip  = uci:get("network", "lan", "ipaddr")
-  luci.template.render("advanced_reboot/applyreboot", {
-        title = luci.i18n.translate("Rebooting..."),
-        msg   = luci.i18n.translate("The system is rebooting now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
-        addr  = luci.ip.new(type(ip) == "string" and ip or "192.168.1.1") or "192.168.1.1"
-      })
-  luci.sys.reboot()
+       ltemplate.render("admin_system/applyreboot", {
+                               title = i18n.translate("Rebooting..."),
+                               msg   = i18n.translate("The system is rebooting now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+                               addr  = ip.new(type(ip) == "string" and ip or "192.168.1.1") or "192.168.1.1"
+                       })
+       sys.reboot()
 end
 
 function action_altreboot()
-  local uci = require "luci.model.uci".cursor()
-  local zyxelFlagPartition, zyxelBootFlag, zyxelNewBootFlag, errorCode, curEnvSetting, newEnvSetting
-  errorMessage = nil
-  errorCode = 0
-  if luci.http.formvalue("cancel") then
-    luci.http.redirect(luci.dispatcher.build_url('admin/system/advanced_reboot'))
-    return
-  end
-  local step = tonumber(luci.http.formvalue("step") or 1)
-  if step == 1 then
-    if device_name and nixio.fs.access("/usr/sbin/fw_printenv") and nixio.fs.access("/usr/sbin/fw_setenv") then
-      luci.template.render("advanced_reboot/alternative_reboot",{})
-    else
-      luci.template.render("advanced_reboot/advanced_reboot",{errorMessage = luci.i18n.translate("No access to fw_printenv or fw_printenv!")})
-    end
-  elseif step == 2 then
-    if boot_envvar1 or boot_envvar2 then -- Linksys devices
-      if boot_envvar1 then
-        curEnvSetting = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1)))
-        if not curEnvSetting then
-          errorMessage = errorMessage .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar1 .. ". "
-          luci.util.perror(luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar1 .. ".")
-        else
-          newEnvSetting = curEnvSetting == boot_envvar1_partition_one and boot_envvar1_partition_two or boot_envvar1_partition_one
-          errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar1 .. " " .. newEnvSetting)
-            if errorCode ~= 0 then
-              errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
-              luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
-            end
-        end
-      end
-      if boot_envvar2 then
-        curEnvSetting = luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar2))
-        if not curEnvSetting then
-          errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ". "
-          luci.util.perror(luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ".")
-        else
-          newEnvSetting = curEnvSetting == boot_envvar2_partition_one and boot_envvar2_partition_two or boot_envvar2_partition_one
-          errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar2 .. " '" .. newEnvSetting .. "'")
-          if errorCode ~= 0 then
-            errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
-            luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
-          end
-        end
-      end
-    else -- NetGear device
-      if not zyxelFlagPartition then zyxelFlagPartition = luci.util.trim(luci.sys.exec("source /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
-      if not zyxelFlagPartition then
-        errorMessage = errorMessage .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
-        luci.util.perror(luci.i18n.translate("Unable to find Dual Boot Flag Partition."))
-      else
-        zyxelBootFlag = tonumber(luci.sys.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
-        zyxelNewBootFlag = zyxelBootFlag and zyxelBootFlag == 1 and "\\xff" or "\\x01"
-        if zyxelNewBootFlag then
-          errorCode = luci.sys.call("printf \"" .. zyxelNewBootFlag .. "\" >" .. zyxelFlagPartition )
-          if errorCode ~= 0 then
-            errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
-            luci.util.perror(luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ".")
-          end
-        end
-      end
-    end
-    if not errorMessage then
-      luci.template.render("advanced_reboot/applyreboot", {
-            title = luci.i18n.translate("Rebooting..."),
-            msg   = luci.i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
-            addr  = luci.ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
-          })
-      luci.sys.reboot()
-    else
-      luci.template.render("advanced_reboot/advanced_reboot",{
-        rom_board_name=rom_board_name,
-        device_name=device_name,
-        boot_envvar1_partition_one=boot_envvar1_partition_one,
-        partition_one_os=partition_one_os,
-        boot_envvar1_partition_two=boot_envvar1_partition_two,
-        partition_two_os=partition_two_os,
-        current_partition=current_partition,
-        errorMessage = errorMessage})
-    end
-  end
+       local zyxelFlagPartition, zyxelBootFlag, zyxelNewBootFlag, errorCode, curEnvSetting, newEnvSetting
+       errorMessage = nil
+       errorCode = 0
+       if http.formvalue("cancel") then
+               http.redirect(dispatcher.build_url('admin/system/advanced_reboot'))
+               return
+       end
+       local step = tonumber(http.formvalue("step") or 1)
+       if step == 1 then
+               if fs.access("/usr/sbin/fw_printenv") and fs.access("/usr/sbin/fw_setenv") then
+                       ltemplate.render("advanced_reboot/alternative_reboot",{})
+               else
+                       ltemplate.render("advanced_reboot/advanced_reboot",{errorMessage = i18n.translate("No access to fw_printenv or fw_printenv!")})
+               end
+       elseif step == 2 then
+               if bev1 or bev2 then -- Linksys devices
+                       if bev1 then
+                               curEnvSetting = tonumber(util.trim(util.exec("fw_printenv -n " .. bev1)))
+                               if not curEnvSetting then
+                                       errorMessage = errorMessage .. i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev1 .. ". "
+                                       util.perror(i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev1 .. ".")
+                               else
+                                       newEnvSetting = curEnvSetting == bev1p1 and bev1p2 or bev1p1
+                                       errorCode = sys.call("fw_setenv " .. bev1 .. " " .. newEnvSetting)
+                                               if errorCode ~= 0 then
+                                                       errorMessage = errorMessage or "" .. i18n.translate("Unable to set firmware environment variable") .. ": " .. bev1 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ". "
+                                                       util.perror(i18n.translate("Unable to set firmware environment variable") .. ": " .. bev1 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ".")
+                                               end
+                               end
+                       end
+                       if bev2 then
+                               curEnvSetting = util.trim(util.exec("fw_printenv -n " .. bev2))
+                               if not curEnvSetting then
+                                       errorMessage = errorMessage or "" .. i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev2 .. ". "
+                                       util.perror(i18n.translate("Unable to obtain firmware environment variable") .. ": " .. bev2 .. ".")
+                               else
+                                       newEnvSetting = curEnvSetting == bev2p1 and bev2p2 or bev2p1
+                                       errorCode = sys.call("fw_setenv " .. bev2 .. " '" .. newEnvSetting .. "'")
+                                       if errorCode ~= 0 then
+                                               errorMessage = errorMessage or "" .. i18n.translate("Unable to set firmware environment variable") .. ": " .. bev2 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ". "
+                                               util.perror(i18n.translate("Unable to set firmware environment variable") .. ": " .. bev2 .. " " .. i18n.translate("to") .. " " .. newEnvSetting .. ".")
+                                       end
+                               end
+                       end
+               else -- NetGear device
+                       if not zyxelFlagPartition then zyxelFlagPartition = util.trim(util.exec(". /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
+                       if not zyxelFlagPartition then
+                               errorMessage = errorMessage .. i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
+                               util.perror(i18n.translate("Unable to find Dual Boot Flag Partition."))
+                       else
+                               zyxelBootFlag = tonumber(util.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
+                               zyxelNewBootFlag = zyxelBootFlag and zyxelBootFlag == 1 and "\\xff" or "\\x01"
+                               if zyxelNewBootFlag then
+                                       errorCode = sys.call("printf \"" .. zyxelNewBootFlag .. "\" >" .. zyxelFlagPartition )
+                                       if errorCode ~= 0 then
+                                               errorMessage = errorMessage or "" .. i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
+                                               util.perror(i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ".")
+                                       end
+                               end
+                       end
+               end
+               if not errorMessage then
+                       ltemplate.render("admin_system/applyreboot", {
+                                               title = i18n.translate("Rebooting..."),
+                                               msg   = i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+                                               addr  = ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
+                                       })
+                       sys.reboot()
+               else
+                       ltemplate.render("advanced_reboot/advanced_reboot",{
+                               romBoardName=romBoardName,
+                               device_name=device_name,
+                               bev1p1=bev1p1,
+                               p1_os=p1_os,
+                               bev1p2=bev1p2,
+                               p2_os=p2_os,
+                               current_partition=current_partition,
+                               errorMessage = errorMessage})
+               end
+       end
 end
 
 function action_poweroff()
-  local uci = require "luci.model.uci".cursor()
-  if luci.http.formvalue("cancel") then
-    luci.http.redirect(luci.dispatcher.build_url('admin/system/advanced_reboot'))
-    return
-  end
-  local step = tonumber(luci.http.formvalue("step") or 1)
-  if step == 1 then
-    if nixio.fs.access("/sbin/poweroff") then
-      luci.template.render("advanced_reboot/power_off",{})
-    else
-      luci.template.render("advanced_reboot/advanced_reboot",{})
-    end
-  elseif step == 2 then
-    luci.template.render("advanced_reboot/applyreboot", {
-          title = luci.i18n.translate("Shutting down..."),
-          msg   = luci.i18n.translate("The system is shutting down now.<br /> DO NOT POWER OFF THE DEVICE!<br /> It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
-          addr  = luci.ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
-        })
-    luci.sys.call("/sbin/poweroff")
-  end
+       local uci = require "luci.model.uci".cursor()
+       if http.formvalue("cancel") then
+               http.redirect(dispatcher.build_url('admin/system/advanced_reboot'))
+               return
+       end
+       local step = tonumber(http.formvalue("step") or 1)
+       if step == 1 then
+               if fs.access("/sbin/poweroff") then
+                       ltemplate.render("advanced_reboot/power_off",{})
+               else
+                       ltemplate.render("advanced_reboot/advanced_reboot",{})
+               end
+       elseif step == 2 then
+               ltemplate.render("admin_system/applyreboot", {
+                                       title = i18n.translate("Shutting down..."),
+                                       msg   = i18n.translate("The system is shutting down now.<br /> DO NOT POWER OFF THE DEVICE!<br /> It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+                                       addr  = ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
+                               })
+               sys.call("/sbin/poweroff")
+       end
 end
index 5c14f52ff8db2106264a7a2b936bcb5eded5d3d5..f3d8338c47e069b810a9783d90f5c97d21fcc06d 100644 (file)
 
 <%- if device_name then -%>
 <fieldset class="cbi-section">
-  <legend><%=device_name%><%: Partitions%></legend>
-  <div class="table cbi-section-table" id="partitions">
-    <div class="tr cbi-section-table-titles">
-      <div class="th cbi-section-table-cell"><%:Partition%></div>
-      <div class="th cbi-section-table-cell"><%:Status%></div>
-      <div class="th cbi-section-table-cell"><%:Firmware/OS (Kernel)%></div>
-      <div class="th cbi-section-table-cell"><%:Action%></div>
-    </div>
-    <div class="tr cbi-section-table-row">
-      <div class="td">
-        <%=string.format("%X", boot_envvar1_partition_one)%>
-      </div>
-      <div class="td">
-        <%- if boot_envvar1_partition_one == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>
-      </div>
-      <div class="td">
-        <%=partition_one_os%>
-      </div>
-      <div class="td">
-        <%- if boot_envvar1_partition_one == current_partition then -%>
-        <form method="post" action="<%=url('admin/system/advanced_reboot/reboot')%>">
-          <input type="hidden" name="token" value="<%=token%>" />
-          <input id="reboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to current partition%>" />
-        </form>
-      <%- else -%>
-      <form method="post" action="<%=url('admin/system/advanced_reboot/alternative_reboot')%>">
-        <input type="hidden" name="token" value="<%=token%>" />
-        <input id="altreboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to alternative partition...%>" />
-      </form>
-        <%- end -%>
-      </div>
-    </div>
-    <div class="tr cbi-section-table-row">
-      <div class="td">
-        <%=string.format("%X", boot_envvar1_partition_two)%>
-      </div>
-      <div class="td">
-        <%- if boot_envvar1_partition_two == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>
-      </div>
-      <div class="td">
-        <%=partition_two_os%>
-      </div>
-      <div class="td">
-        <%- if boot_envvar1_partition_two == current_partition then -%>
-          <form method="post" action="<%=url('admin/system/advanced_reboot/reboot')%>">
-               <input type="hidden" name="token" value="<%=token%>" />
-            <input id="reboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to current partition%>" />
-          </form>
-        <%- else -%>
-        <form method="post" action="<%=url('admin/system/advanced_reboot/alternative_reboot')%>">
-          <input type="hidden" name="token" value="<%=token%>" />
-          <input id="altreboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to alternative partition...%>" />
-        </form>
-        <%- end -%>
-      </div>
-    </div>
-  </div>
+       <legend><%=device_name%><%: Partitions%></legend>
+       <div class="table cbi-section-table" id="partitions">
+               <div class="tr cbi-section-table-titles">
+                       <div class="th cbi-section-table-cell"><%:Partition%></div>
+                       <div class="th cbi-section-table-cell"><%:Status%></div>
+                       <div class="th cbi-section-table-cell"><%:Firmware%></div>
+                       <div class="th cbi-section-table-cell"><%:Reboot%></div>
+               </div>
+               <div class="tr cbi-section-table-row cbi-rowstyle-1">
+                       <div class="td">
+                               <%=string.format("%X", bev1p1)%>
+                       </div>
+                       <div class="td">
+                               <%- if bev1p1 == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>
+                       </div>
+                       <div class="td">
+                               <%=p1_os%>
+                       </div>
+                       <div class="td">
+                               <%- if bev1p1 == current_partition then -%>
+                               <form method="post" action="<%=url('admin/system/advanced_reboot/reboot')%>">
+                                       <input type="hidden" name="token" value="<%=token%>" />
+                                       <input id="reboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to current partition%>" />
+                               </form>
+                       <%- else -%>
+                       <form method="post" action="<%=url('admin/system/advanced_reboot/alternative_reboot')%>">
+                               <input type="hidden" name="token" value="<%=token%>" />
+                               <input id="altreboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to alternative partition...%>" />
+                       </form>
+                               <%- end -%>
+                       </div>
+               </div>
+               <div class="tr cbi-section-table-row cbi-rowstyle-2">
+                       <div class="td">
+                               <%=string.format("%X", bev1p2)%>
+                       </div>
+                       <div class="td">
+                               <%- if bev1p2 == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>
+                       </div>
+                       <div class="td">
+                               <%=p2_os%>
+                       </div>
+                       <div class="td">
+                               <%- if bev1p2 == current_partition then -%>
+                                       <form method="post" action="<%=url('admin/system/advanced_reboot/reboot')%>">
+                                               <input type="hidden" name="token" value="<%=token%>" />
+                                               <input id="reboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to current partition%>" />
+                                       </form>
+                               <%- else -%>
+                               <form method="post" action="<%=url('admin/system/advanced_reboot/alternative_reboot')%>">
+                                       <input type="hidden" name="token" value="<%=token%>" />
+                                       <input id="altreboot-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Reboot to alternative partition...%>" />
+                               </form>
+                               <%- end -%>
+                       </div>
+               </div>
+       </div>
 </fieldset>
 <%- else -%>
-  <%- if rom_board_name then -%>
-    <p class="alert-message warning"><%=pcdata(translatef("Warning: Device (%s) is unknown or isn't a dual-partition device!", rom_board_name))%></p>
-  <%- else -%>
-    <p class="alert-message warning"><%=pcdata(translatef("Warning: Unable to obtain device information!"))%></p>
-  <%- end -%>
+       <%- if rom_board_name then -%>
+               <p class="alert-message warning"><%=pcdata(translatef("Warning: Device (%s) is unknown or isn't a dual-partition device!", rom_board_name))%></p>
+       <%- else -%>
+               <p class="alert-message warning"><%=pcdata(translatef("Warning: Unable to obtain device information!"))%></p>
+       <%- end -%>
 <%- end -%>
 
 <hr />
 <%- if nixio.fs.access("/sbin/poweroff") then -%>
 <form method="post" action="<%=url('admin/system/advanced_reboot/power_off')%>">
        <input type="hidden" name="token" value="<%=token%>" />
-  <input id="poweroff-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Perform power off...%>" />
+       <input id="poweroff-button" type="submit" class="cbi-button cbi-button-apply important" value="<%:Perform power off...%>" />
 </form>
 <%- else -%>
-  <p class="alert-message warning"><%:Warning: This system does not support powering off!%></p>
+       <p class="alert-message warning"><%:Warning: This system does not support powering off!%></p>
 <%- end -%>
 
 <%+footer%>
index b15f16b0d573277585e8fbf8450000e5649a2bde..db11020628f97f519e0f48514177e53e4219ed40 100644 (file)
 <h2 name="content"><%:Reboot Device to an Alternative Partition%> - <%:Confirm%></h2>
 <p>
        <%_ WARNING: An alternative partition might have its own settings and completely different firmware.<br /><br />
-    As your network configuration and WiFi SSID/password on alternative partition might be different,
-      you might have to adjust your computer settings to be able to access your device once it reboots.<br /><br />
-    Please also be aware that alternative partition firmware might not provide an easy way to switch active partition
-      and boot back to the currently active partition.<br /><br />
+               As your network configuration and WiFi SSID/password on alternative partition might be different,
+                       you might have to adjust your computer settings to be able to access your device once it reboots.<br /><br />
+               Please also be aware that alternative partition firmware might not provide an easy way to switch active partition
+                       and boot back to the currently active partition.<br /><br />
                Click "Proceed" below to reboot device to an alternative partition. %>
 </p>
 
diff --git a/applications/luci-app-advanced-reboot/root/etc/uci-defaults/40_luci-advanced-reboot b/applications/luci-app-advanced-reboot/root/etc/uci-defaults/40_luci-advanced-reboot
new file mode 100644 (file)
index 0000000..e1a8f1e
--- /dev/null
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+rm -rf /var/luci-modulecache/; rm -f /var/luci-indexcache;
+exit 0
+