ath10k-ct: adjust tx power reduction for US regulatory domain
authorSven Eckelmann <sven@narfation.org>
Tue, 11 Jun 2019 12:53:12 +0000 (14:53 +0200)
committerChristian Lamparter <chunkeey@gmail.com>
Fri, 14 Jun 2019 22:40:25 +0000 (00:40 +0200)
FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4):

> (4) The conducted output power limit
> specified in paragraph (b) of this section
> is based on the use of antennas
> with directional gains that do not exceed
> 6 dBi. Except as shown in paragraph
> (c) of this section, if transmitting
> antennas of directional gain greater
> than 6 dBi are used, the conducted
> output power from the intentional radiator
> shall be reduced below the stated
> values in paragraphs (b)(1), (b)(2),
> and (b)(3) of this section, as appropriate,
> by the amount in dB that the
> directional gain of the antenna exceeds
> 6 dBi.

https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf

Signed-off-by: Sven Eckelmann <sven@narfation.org>
package/kernel/ath10k-ct/patches/205-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch [new file with mode: 0644]

diff --git a/package/kernel/ath10k-ct/patches/205-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch b/package/kernel/ath10k-ct/patches/205-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch
new file mode 100644 (file)
index 0000000..ff8631e
--- /dev/null
@@ -0,0 +1,101 @@
+From: Sven Eckelmann <seckelmann@datto.com>
+Date: Wed, 28 Nov 2018 16:16:27 +0100
+Subject: ath10k: adjust tx power reduction for US regulatory domain
+
+FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4):
+
+> (4) The conducted output power limit
+> specified in paragraph (b) of this section
+> is based on the use of antennas
+> with directional gains that do not exceed
+> 6 dBi. Except as shown in paragraph
+> (c) of this section, if transmitting
+> antennas of directional gain greater
+> than 6 dBi are used, the conducted
+> output power from the intentional radiator
+> shall be reduced below the stated
+> values in paragraphs (b)(1), (b)(2),
+> and (b)(3) of this section, as appropriate,
+> by the amount in dB that the
+> directional gain of the antenna exceeds
+> 6 dBi.
+
+https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf
+
+Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
+
+Forwarded: no
+
+--- a/ath10k-4.19/mac.c
++++ b/ath10k-4.19/mac.c
+@@ -1153,6 +1153,40 @@ static inline int ath10k_vdev_setup_sync
+       return ar->last_wmi_vdev_start_status;
+ }
++static u32 ath10k_get_max_antenna_gain(struct ath10k *ar,
++                                     u32 ch_max_antenna_gain)
++{
++      u32 max_antenna_gain;
++
++      if (ar->dfs_detector && ar->dfs_detector->region == NL80211_DFS_FCC) {
++              /* FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4):
++               *
++               * > (4) The conducted output power limit
++               * > specified in paragraph (b) of this section
++               * > is based on the use of antennas
++               * > with directional gains that do not exceed
++               * > 6 dBi. Except as shown in paragraph
++               * > (c) of this section, if transmitting
++               * > antennas of directional gain greater
++               * > than 6 dBi are used, the conducted
++               * > output power from the intentional radiator
++               * > shall be reduced below the stated
++               * > values in paragraphs (b)(1), (b)(2),
++               * > and (b)(3) of this section, as appropriate,
++               * > by the amount in dB that the
++               * > directional gain of the antenna exceeds
++               * > 6 dBi.
++               *
++               * https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf
++               */
++              max_antenna_gain = 6;
++      } else {
++              max_antenna_gain = 0;
++      }
++
++      return max(ch_max_antenna_gain, max_antenna_gain);
++}
++
+ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
+ {
+       struct cfg80211_chan_def *chandef = NULL;
+@@ -1185,7 +1219,8 @@ static int ath10k_monitor_vdev_start(str
+       arg.channel.min_power = 0;
+       arg.channel.max_power = channel->max_power * 2;
+       arg.channel.max_reg_power = channel->max_reg_power * 2;
+-      arg.channel.max_antenna_gain = channel->max_antenna_gain;
++      arg.channel.max_antenna_gain = ath10k_get_max_antenna_gain(ar,
++                                              channel->max_antenna_gain);
+       reinit_completion(&ar->vdev_setup_done);
+@@ -1627,7 +1662,8 @@ static int ath10k_vdev_start_restart(str
+       arg.channel.min_power = 0;
+       arg.channel.max_power = chandef->chan->max_power * 2;
+       arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
+-      arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
++      arg.channel.max_antenna_gain = ath10k_get_max_antenna_gain(ar,
++                                      chandef->chan->max_antenna_gain);
+       /* CT Firmware can support 32+ VDEVS, but can only support
+        * beacon-ing devs with dev ids 0 - 31 due to firmware limitations.
+@@ -3799,7 +3835,8 @@ static int ath10k_update_channel_list(st
+                       ch->min_power = 0;
+                       ch->max_power = channel->max_power * 2;
+                       ch->max_reg_power = channel->max_reg_power * 2;
+-                      ch->max_antenna_gain = channel->max_antenna_gain;
++                      ch->max_antenna_gain = ath10k_get_max_antenna_gain(ar,
++                                              channel->max_antenna_gain);
+                       ch->reg_class_id = 0; /* FIXME */
+                       /* FIXME: why use only legacy modes, why not any