mediatek: update openembed som7981 support

The board has been redesigned due to previous hardware bugs
(with other reasons maybe).

Changes in new board:
- Added a gpio beeper
- Added a Atmel i2c eeprom
- Added a Atmel i2c ECC accelerator
- Added a Philips RTC module
- Added two RS485
- Removed WPS button
- Replaced USB3 port with M.2 B-key for LTE modules
- Swapped GbE LEDs gpio

Also assigned wifi mac with nvmem binding, added iface setup for failsafe,
increased phy assert time for rtl8221b, and updated LED labels.

Keeping compatibility for old version is not necessary here as only
few samples were sent to those interested in it.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/17253
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

5 files changed, 99 insertions, 27 deletions

diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
index 0deab42481..1025d1f1e1 100644
--- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
+++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
@@ -2,7 +2,8 @@ set_preinit_iface() {
 	case $(board_name) in
 	cudy,m3000-v1|\
 	cudy,tr3000-v1|\
-	glinet,gl-mt3000)
+	glinet,gl-mt3000|\
+	openembed,som7981)
 		ip link set eth1 up
 		ifname=eth1
 		;;
diff --git a/target/linux/mediatek/dts/mt7981b-openembed-som7981.dts b/target/linux/mediatek/dts/mt7981b-openembed-som7981.dts
index 0e9dea1ddb..d5c868567b 100644
--- a/target/linux/mediatek/dts/mt7981b-openembed-som7981.dts
+++ b/target/linux/mediatek/dts/mt7981b-openembed-som7981.dts
@@ -12,9 +12,10 @@
 	compatible = "openembed,som7981", "mediatek,mt7981";
 
 	aliases {
-		led-boot = &wlan2g_led;
-		led-failsafe = &wlan2g_led;
-		led-upgrade = &wlan2g_led;
+		led-boot = &act_led;
+		led-failsafe = &act_led;
+		led-running = &act_led;
+		led-upgrade = &act_led;
 		serial0 = &uart0;
 	};
 
@@ -26,6 +27,11 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -34,12 +40,6 @@
 			linux,code = <KEY_RESTART>;
 			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
 		};
-
-		button-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-		};
 	};
 
 	gpio-leds {
@@ -47,28 +47,27 @@
 
 		led-0 {
 			function = LED_FUNCTION_LAN;
-			color = <LED_COLOR_ID_AMBER>;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
 		};
 
 		led-1 {
 			function = LED_FUNCTION_LAN;
-			color = <LED_COLOR_ID_GREEN>;
+			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wlan2g_led: led-2 {
-			function = LED_FUNCTION_WLAN_2GHZ;
-			color = <LED_COLOR_ID_RED>;
+		led-2 {
+			function = LED_FUNCTION_PANIC;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
+			panic-indicator;
 		};
 
-		led-3 {
-			function = LED_FUNCTION_WLAN_5GHZ;
+		act_led: led-3 {
+			function = LED_FUNCTION_ACTIVITY;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
 		};
 	};
 };
@@ -97,14 +96,38 @@
 	};
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		page-size = <32>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
 &mdio_bus {
 	phy0: ethernet-phy@5 {
 		reg = <5>;
 		compatible = "ethernet-phy-ieee802.3-c45";
 		phy-mode = "2500base-x";
 		reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <50000>;
+		reset-assert-us = <15000>;
+		reset-deassert-us = <68000>;
 		realtek,aldps-enable;
 	};
 };
@@ -184,6 +207,13 @@
 };
 
 &pio {
+	i2c0_pins: i2c0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
 	spi0_flash_pins: spi0-pins {
 		mux {
 			function = "spi";
@@ -202,12 +232,45 @@
 			mediatek,pull-down-adv = <0>;
 		};
 	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_3";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_tx_rx";
+		};
+	};
+
+	wwan_rst_h: wwan-rst-h {
+		pins = "GPIO_WPS";
+		drive-strength = <8>;
+		mediatek,pull-down-adv = <0>;
+		output-low;
+	};
 };
 
 &uart0 {
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
 &usb_phy {
 	status = "okay";
 };
@@ -220,8 +283,16 @@
 	nvmem-cells = <&eeprom_factory_0>;
 	nvmem-cell-names = "eeprom";
 	status = "okay";
+
+	band@1 {
+		reg = <1>;
+		nvmem-cells = <&macaddr_factory_a 0>;
+		nvmem-cell-names = "mac-address";
+	};
 };
 
 &xhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wwan_rst_h>;
 	status = "okay";
 };
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 2496323d87..ca4961c655 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -71,8 +71,8 @@ nradio,c8-668gl)
 	ucidef_set_led_netdev "5g" "5G" "blue:indicator-0" "eth1" "link"
 	;;
 openembed,som7981)
-	ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
-	ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
+	ucidef_set_led_netdev "lanact" "LANACT" "amber:lan" "eth1" "rx tx"
+	ucidef_set_led_netdev "lanlink" "LANLINK" "green:lan" "eth1" "link"
 	;;
 openwrt,one)
 	ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 41c425e557..3f5554d269 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -141,9 +141,6 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && echo "$hw_mac_addr" > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
 		;;
-	openembed,som7981)
-		[ "$PHYNBR" = "1" ] && cat /sys/class/net/eth0/address > /sys${DEVPATH}/macaddress
-		;;
 	qihoo,360t7)
 		addr=$(mtd_get_mac_ascii factory lanMac)
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index abc6fc1e09..91706f8c73 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -1215,7 +1215,10 @@ define Device/openembed_som7981
   DEVICE_MODEL := SOM7981
   DEVICE_DTS := mt7981b-openembed-som7981
   DEVICE_DTS_DIR := ../dts
-  DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
+  DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
+	kmod-crypto-hw-atmel kmod-eeprom-at24 kmod-gpio-beeper kmod-rtc-pcf8563 \
+	kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option \
+	kmod-usb3 uqmi
   UBINIZE_OPTS := -E 5
   BLOCKSIZE := 128k
   PAGESIZE := 2048