realtek: pcs: rtl931x: use hardware mode for configuration

Pass the SerDes hardware mode to rtpcs_931x_sds_config_mode instead of
the PHY_INTERFACE_MODE_* mode and use it. Replace matched modes
accordingly.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c b/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
index 381d205d0d884865f359cc6828247799dc36e505..1ed8858ff18db4eceee7b8f08a8f0cf548284517 100644 (file)
--- a/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
+++ b/target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
@@ -2677,15 +2677,15 @@ static sds_config sds_config_10p3125g_cmu_type1[] = {
 };
 
 static int rtpcs_931x_sds_config_mode(struct rtpcs_serdes *sds,
-                                     phy_interface_t mode, int chiptype)
+                                     enum rtpcs_sds_mode hw_mode, int chiptype)
 {
        struct rtpcs_serdes *even_sds = rtpcs_sds_get_even(sds);
 
-       switch (mode) {
-       case PHY_INTERFACE_MODE_NA:
+       switch (hw_mode) {
+       case RTPCS_SDS_MODE_OFF:
                break;
 
-       case PHY_INTERFACE_MODE_XGMII: /* MII_XSGMII */
+       case RTPCS_SDS_MODE_XSGMII:
 
                if (chiptype) {
                        /* fifo inv clk */
@@ -2700,7 +2700,12 @@ static int rtpcs_931x_sds_config_mode(struct rtpcs_serdes *sds,
                rtpcs_sds_write_bits(sds, 0x80, 0xE, 12, 12, 1);
                break;
 
-       case PHY_INTERFACE_MODE_USXGMII: /* MII_USXGMII_10GSXGMII/10GDXGMII/10GQXGMII: */
+       case RTPCS_SDS_MODE_USXGMII_10GSXGMII:
+       case RTPCS_SDS_MODE_USXGMII_10GDXGMII:
+       case RTPCS_SDS_MODE_USXGMII_10GQXGMII:
+       case RTPCS_SDS_MODE_USXGMII_5GSXGMII:
+       case RTPCS_SDS_MODE_USXGMII_5GDXGMII:
+       case RTPCS_SDS_MODE_USXGMII_2_5GSXGMII:
                u32 op_code = 0x6003;
 
                if (chiptype) {
@@ -2742,8 +2747,8 @@ static int rtpcs_931x_sds_config_mode(struct rtpcs_serdes *sds,
                }
                break;
 
-       case PHY_INTERFACE_MODE_10GBASER: /* MII_10GR / MII_10GR1000BX_AUTO: */
-                                         /* configure 10GR fiber mode=1 */
+       case RTPCS_SDS_MODE_10GBASER: /* 10GR1000BX_AUTO */
+               /* configure 10GR fiber mode=1 */
                rtpcs_sds_write_bits(sds, 0x1f, 0xb, 1, 1, 1);
 
                /* init fiber_1g */
@@ -2759,7 +2764,7 @@ static int rtpcs_931x_sds_config_mode(struct rtpcs_serdes *sds,
                rtpcs_sds_write_bits(sds, 0x1f, 0x7, 10, 4, 0x7f);
                break;
 
-       case PHY_INTERFACE_MODE_1000BASEX: /* MII_1000BX_FIBER */
+       case RTPCS_SDS_MODE_1000BASEX:
                rtpcs_sds_write_bits(sds, 0x43, 0x13, 15, 14, 0);
 
                rtpcs_sds_write_bits(sds, 0x42, 0x0, 12, 12, 1);
@@ -2767,18 +2772,18 @@ static int rtpcs_931x_sds_config_mode(struct rtpcs_serdes *sds,
                rtpcs_sds_write_bits(sds, 0x42, 0x0, 13, 13, 0);
                break;
 
-       case PHY_INTERFACE_MODE_SGMII:
+       case RTPCS_SDS_MODE_SGMII:
                rtpcs_sds_write_bits(sds, 0x24, 0x9, 15, 15, 0);
 
                /* this was in rtl931x_phylink_mac_config in dsa/rtl83xx/dsa.c before */
                rtpcs_931x_sds_cmu_band_set(sds, true, 62, PHY_INTERFACE_MODE_SGMII);
                break;
 
-       case PHY_INTERFACE_MODE_2500BASEX:
+       case RTPCS_SDS_MODE_2500BASEX:
                rtpcs_sds_write_bits(sds, 0x41, 0x14, 8, 8, 1);
                break;
 
-       case PHY_INTERFACE_MODE_QSGMII:
+       case RTPCS_SDS_MODE_QSGMII:
        default:
                return -ENOTSUPP;
        }
@@ -2861,7 +2866,7 @@ static int rtpcs_931x_setup_serdes(struct rtpcs_serdes *sds,
                return -ENOTSUPP;
        }
 
-       ret = rtpcs_931x_sds_config_mode(sds, mode, chiptype);
+       ret = rtpcs_931x_sds_config_mode(sds, hw_mode, chiptype);
        if (ret < 0)
                return ret;