diff options
| author | George Moussalem | 2025-04-20 11:22:09 +0000 |
|---|---|---|
| committer | Robert Marko | 2025-04-21 11:04:09 +0000 |
| commit | 6782d0e66fd607a3536d5fd94e998d2d700ffeaf (patch) | |
| tree | c40bf14be23b6e8f18fc98a42a6c33e006c5d401 | |
| parent | 97f09fa25e2a463fcff0241faa3f5e1dadf51a10 (diff) | |
| download | openwrt-6782d0e66fd607a3536d5fd94e998d2d700ffeaf.tar.gz | |
arm64: dts: qcom: ipq5018: add #clock-cells to GE Phy
The IPQ5018 GE Phy driver registers two fixed rate clocks which are
passed on to the GCC which gatekeeps and passes them back to the phy.
Fix 'bad phandle' warning and tell consumer (GCC) how many cells to
expect when compiling.
Warning (clocks_property): /soc@0/clock-controller@1800000: Missing property '#clock-cells' in node /soc@0/mdio@88000/ethernet-phy@7 or bad phandle (referred from clocks[5])
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18548
Signed-off-by: Robert Marko <robimarko@gmail.com>
| -rw-r--r-- | target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch | 16 | ||||
| -rw-r--r-- | target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch | 2 |
2 files changed, 11 insertions, 7 deletions
diff --git a/target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch b/target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch index 9ac109858d..29606309e9 100644 --- a/target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch +++ b/target/linux/qualcommax/patches-6.6/0713-arm64-dts-qcom-ipq5018-add-ge_phy-node.patch @@ -13,26 +13,30 @@ Signed-off-by: George Moussalem <george.moussalem@outlook.com> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi -@@ -200,6 +200,18 @@ - clocks = <&gcc GCC_MDIO0_AHB_CLK>; +@@ -210,6 +210,22 @@ + clocks = <&gcc GCC_MDIO1_AHB_CLK>; clock-names = "gcc_mdio_ahb_clk"; status = "disabled"; + + ge_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id004d.d0c0"; + reg = <7>; ++ ++ clocks = <&gcc GCC_GEPHY_RX_CLK>, ++ <&gcc GCC_GEPHY_TX_CLK>; ++ + resets = <&gcc GCC_GEPHY_BCR>, + <&gcc GCC_GEPHY_MDC_SW_ARES>, + <&gcc GCC_GEPHY_DSP_HW_ARES>, + <&gcc GCC_GEPHY_RX_ARES>, + <&gcc GCC_GEPHY_TX_ARES>; -+ clocks = <&gcc GCC_GEPHY_RX_CLK>, -+ <&gcc GCC_GEPHY_TX_CLK>; ++ ++ #clock-cells = <1>; + }; }; - mdio1: mdio@90000 { -@@ -394,8 +406,8 @@ + cmn_pll: clock-controller@9b000 { +@@ -394,8 +410,8 @@ <&pcie0_phy>, <&pcie1_phy>, <0>, diff --git a/target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch b/target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch index 786345f640..926fd75d91 100644 --- a/target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch +++ b/target/linux/qualcommax/patches-6.6/0816-arm64-dts-qcom-ipq5018-add-wifi-support.patch @@ -13,7 +13,7 @@ Signed-off-by: George Moussalem <george.moussalem@outlook.com> --- --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi -@@ -692,6 +692,225 @@ +@@ -696,6 +696,225 @@ }; }; |