diff options
| author | Sander Vanheule | 2025-02-22 11:06:10 +0000 |
|---|---|---|
| committer | Sander Vanheule | 2025-02-22 11:31:24 +0000 |
| commit | 890293c13cc0c7e23577cb92c36edcc9911b4400 (patch) | |
| tree | db335d40d29a381b9b32670f104f8f263de4541b | |
| parent | 6936deac67e5f0d950bcc26e56bc90b15b12db12 (diff) | |
| download | openwrt-890293c13cc0c7e23577cb92c36edcc9911b4400.tar.gz | |
realtek: add PoE enable line to Netgear GS310TP
By switching to the new RTL8231 driver in commit b7af54d5c18c ("realtek:
Simple conversions to RTL8231 MFD driver"), the bootloader state of the
RTL8231's pins is now maintained. As the bootloader de-asserts the PoE
enable signal, this means PoE output is no longer available.
Add a gpio-hog with high output, restoring the line value from when the
pin was configured (by default) as an input with a pull-up resistor.
This will hard-enable the PoE output, but the individual ports can still
be administratively disabled by realtek-poe or a similar tool.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
| -rw-r--r-- | target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts index a6f7181c11..9d58b3028a 100644 --- a/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts +++ b/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts @@ -8,6 +8,15 @@ }; +&gpio1 { + poe-enable { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-enable"; + }; +}; + &firmware { openwrt,ih-magic = <0x4e474335>; }; |