#include <asm/arch/pch.h>
#include <asm/arch/rcb.h>
-struct cpu_broadwell_priv {
- bool ht_disabled;
-};
-
-/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */
-static const u8 power_limit_time_sec_to_msr[] = {
- [0] = 0x00,
- [1] = 0x0a,
- [2] = 0x0b,
- [3] = 0x4b,
- [4] = 0x0c,
- [5] = 0x2c,
- [6] = 0x4c,
- [7] = 0x6c,
- [8] = 0x0d,
- [10] = 0x2d,
- [12] = 0x4d,
- [14] = 0x6d,
- [16] = 0x0e,
- [20] = 0x2e,
- [24] = 0x4e,
- [28] = 0x6e,
- [32] = 0x0f,
- [40] = 0x2f,
- [48] = 0x4f,
- [56] = 0x6f,
- [64] = 0x10,
- [80] = 0x30,
- [96] = 0x50,
- [112] = 0x70,
- [128] = 0x11,
-};
-
-/* Convert POWER_LIMIT_1_TIME MSR value to seconds */
-static const u8 power_limit_time_msr_to_sec[] = {
- [0x00] = 0,
- [0x0a] = 1,
- [0x0b] = 2,
- [0x4b] = 3,
- [0x0c] = 4,
- [0x2c] = 5,
- [0x4c] = 6,
- [0x6c] = 7,
- [0x0d] = 8,
- [0x2d] = 10,
- [0x4d] = 12,
- [0x6d] = 14,
- [0x0e] = 16,
- [0x2e] = 20,
- [0x4e] = 24,
- [0x6e] = 28,
- [0x0f] = 32,
- [0x2f] = 40,
- [0x4f] = 48,
- [0x6f] = 56,
- [0x10] = 64,
- [0x30] = 80,
- [0x50] = 96,
- [0x70] = 112,
- [0x11] = 128,
-};
-
int arch_cpu_init_dm(void)
{
struct udevice *dev;
pci_x86_write_config(bus, PCH_DEV_LPC, LPC_EN, COMA_LPC_EN,
PCI_SIZE_16);
}
-
-/*
- * The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate
- * the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly
- * when a core is woken up
- */
-static int pcode_ready(void)
-{
- int wait_count;
- const int delay_step = 10;
-
- wait_count = 0;
- do {
- if (!(readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) &
- MAILBOX_RUN_BUSY))
- return 0;
- wait_count += delay_step;
- udelay(delay_step);
- } while (wait_count < 1000);
-
- return -ETIMEDOUT;
-}
-
-static u32 pcode_mailbox_read(u32 command)
-{
- int ret;
-
- ret = pcode_ready();
- if (ret) {
- debug("PCODE: mailbox timeout on wait ready\n");
- return ret;
- }
-
- /* Send command and start transaction */
- writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
-
- ret = pcode_ready();
- if (ret) {
- debug("PCODE: mailbox timeout on completion\n");
- return ret;
- }
-
- /* Read mailbox */
- return readl(MCHBAR_REG(BIOS_MAILBOX_DATA));
-}
-
-static int pcode_mailbox_write(u32 command, u32 data)
-{
- int ret;
-
- ret = pcode_ready();
- if (ret) {
- debug("PCODE: mailbox timeout on wait ready\n");
- return ret;
- }
-
- writel(data, MCHBAR_REG(BIOS_MAILBOX_DATA));
-
- /* Send command and start transaction */
- writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
-
- ret = pcode_ready();
- if (ret) {
- debug("PCODE: mailbox timeout on completion\n");
- return ret;
- }
-
- return 0;
-}
-
-/* @dev is the CPU device */
-static void initialize_vr_config(struct udevice *dev)
-{
- int ramp, min_vid;
- msr_t msr;
-
- debug("Initializing VR config\n");
-
- /* Configure VR_CURRENT_CONFIG */
- msr = msr_read(MSR_VR_CURRENT_CONFIG);
- /*
- * Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid
- * on ULT systems
- */
- msr.hi &= 0xc0000000;
- msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A */
- msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A */
- msr.hi |= (0x14 << (32 - 32)); /* PSI1 threshold - 20A */
- msr.hi |= (1 << (62 - 32)); /* Enable PSI4 */
- /* Leave the max instantaneous current limit (12:0) to default */
- msr_write(MSR_VR_CURRENT_CONFIG, msr);
-
- /* Configure VR_MISC_CONFIG MSR */
- msr = msr_read(MSR_VR_MISC_CONFIG);
- /* Set the IOUT_SLOPE scalar applied to dIout in U10.1.9 format */
- msr.hi &= ~(0x3ff << (40 - 32));
- msr.hi |= (0x200 << (40 - 32)); /* 1.0 */
- /* Set IOUT_OFFSET to 0 */
- msr.hi &= ~0xff;
- /* Set entry ramp rate to slow */
- msr.hi &= ~(1 << (51 - 32));
- /* Enable decay mode on C-state entry */
- msr.hi |= (1 << (52 - 32));
- /* Set the slow ramp rate */
- msr.hi &= ~(0x3 << (53 - 32));
- /* Configure the C-state exit ramp rate */
- ramp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "intel,slow-ramp", -1);
- if (ramp != -1) {
- /* Configured slow ramp rate */
- msr.hi |= ((ramp & 0x3) << (53 - 32));
- /* Set exit ramp rate to slow */
- msr.hi &= ~(1 << (50 - 32));
- } else {
- /* Fast ramp rate / 4 */
- msr.hi |= (0x01 << (53 - 32));
- /* Set exit ramp rate to fast */
- msr.hi |= (1 << (50 - 32));
- }
- /* Set MIN_VID (31:24) to allow CPU to have full control */
- msr.lo &= ~0xff000000;
- min_vid = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "intel,min-vid", 0);
- msr.lo |= (min_vid & 0xff) << 24;
- msr_write(MSR_VR_MISC_CONFIG, msr);
-
- /* Configure VR_MISC_CONFIG2 MSR */
- msr = msr_read(MSR_VR_MISC_CONFIG2);
- msr.lo &= ~0xffff;
- /*
- * Allow CPU to control minimum voltage completely (15:8) and
- * set the fast ramp voltage in 10mV steps
- */
- if (cpu_get_family_model() == BROADWELL_FAMILY_ULT)
- msr.lo |= 0x006a; /* 1.56V */
- else
- msr.lo |= 0x006f; /* 1.60V */
- msr_write(MSR_VR_MISC_CONFIG2, msr);
-
- /* Set C9/C10 VCC Min */
- pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f);
-}
-
-static int calibrate_24mhz_bclk(void)
-{
- int err_code;
- int ret;
-
- ret = pcode_ready();
- if (ret)
- return ret;
-
- /* A non-zero value initiates the PCODE calibration */
- writel(~0, MCHBAR_REG(BIOS_MAILBOX_DATA));
- writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL,
- MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
-
- ret = pcode_ready();
- if (ret)
- return ret;
-
- err_code = readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) & 0xff;
-
- debug("PCODE: 24MHz BLCK calibration response: %d\n", err_code);
-
- /* Read the calibrated value */
- writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_READ_CALIBRATION,
- MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
-
- ret = pcode_ready();
- if (ret)
- return ret;
-
- debug("PCODE: 24MHz BLCK calibration value: 0x%08x\n",
- readl(MCHBAR_REG(BIOS_MAILBOX_DATA)));
-
- return 0;
-}
-
-static void configure_pch_power_sharing(void)
-{
- u32 pch_power, pch_power_ext, pmsync, pmsync2;
- int i;
-
- /* Read PCH Power levels from PCODE */
- pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER);
- pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT);
-
- debug("PCH Power: PCODE Levels 0x%08x 0x%08x\n", pch_power,
- pch_power_ext);
-
- pmsync = readl(RCB_REG(PMSYNC_CONFIG));
- pmsync2 = readl(RCB_REG(PMSYNC_CONFIG2));
-
- /*
- * Program PMSYNC_TPR_CONFIG PCH power limit values
- * pmsync[0:4] = mailbox[0:5]
- * pmsync[8:12] = mailbox[6:11]
- * pmsync[16:20] = mailbox[12:17]
- */
- for (i = 0; i < 3; i++) {
- u32 level = pch_power & 0x3f;
- pch_power >>= 6;
- pmsync &= ~(0x1f << (i * 8));
- pmsync |= (level & 0x1f) << (i * 8);
- }
- writel(pmsync, RCB_REG(PMSYNC_CONFIG));
-
- /*
- * Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values
- * pmsync2[0:4] = mailbox[23:18]
- * pmsync2[8:12] = mailbox_ext[6:11]
- * pmsync2[16:20] = mailbox_ext[12:17]
- * pmsync2[24:28] = mailbox_ext[18:22]
- */
- pmsync2 &= ~0x1f;
- pmsync2 |= pch_power & 0x1f;
-
- for (i = 1; i < 4; i++) {
- u32 level = pch_power_ext & 0x3f;
- pch_power_ext >>= 6;
- pmsync2 &= ~(0x1f << (i * 8));
- pmsync2 |= (level & 0x1f) << (i * 8);
- }
- writel(pmsync2, RCB_REG(PMSYNC_CONFIG2));
-}
-
-static int bsp_init_before_ap_bringup(struct udevice *dev)
-{
- int ret;
-
- initialize_vr_config(dev);
- ret = calibrate_24mhz_bclk();
- if (ret)
- return ret;
- configure_pch_power_sharing();
-
- return 0;
-}
-
-int cpu_config_tdp_levels(void)
-{
- msr_t platform_info;
-
- /* Bits 34:33 indicate how many levels supported */
- platform_info = msr_read(MSR_PLATFORM_INFO);
- return (platform_info.hi >> 1) & 3;
-}
-
-static void set_max_ratio(void)
-{
- msr_t msr, perf_ctl;
-
- perf_ctl.hi = 0;
-
- /* Check for configurable TDP option */
- if (turbo_get_state() == TURBO_ENABLED) {
- msr = msr_read(MSR_NHM_TURBO_RATIO_LIMIT);
- perf_ctl.lo = (msr.lo & 0xff) << 8;
- } else if (cpu_config_tdp_levels()) {
- /* Set to nominal TDP ratio */
- msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
- perf_ctl.lo = (msr.lo & 0xff) << 8;
- } else {
- /* Platform Info bits 15:8 give max ratio */
- msr = msr_read(MSR_PLATFORM_INFO);
- perf_ctl.lo = msr.lo & 0xff00;
- }
- msr_write(IA32_PERF_CTL, perf_ctl);
-
- debug("cpu: frequency set to %d\n",
- ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK);
-}
-
-int broadwell_init(struct udevice *dev)
-{
- struct cpu_broadwell_priv *priv = dev_get_priv(dev);
- int num_threads;
- int num_cores;
- msr_t msr;
- int ret;
-
- msr = msr_read(CORE_THREAD_COUNT_MSR);
- num_threads = (msr.lo >> 0) & 0xffff;
- num_cores = (msr.lo >> 16) & 0xffff;
- debug("CPU has %u cores, %u threads enabled\n", num_cores,
- num_threads);
-
- priv->ht_disabled = num_threads == num_cores;
-
- ret = bsp_init_before_ap_bringup(dev);
- if (ret)
- return ret;
-
- set_max_ratio();
-
- return ret;
-}
-
-static void configure_mca(void)
-{
- msr_t msr;
- const unsigned int mcg_cap_msr = 0x179;
- int i;
- int num_banks;
-
- msr = msr_read(mcg_cap_msr);
- num_banks = msr.lo & 0xff;
- msr.lo = 0;
- msr.hi = 0;
- /*
- * TODO(adurbin): This should only be done on a cold boot. Also, some
- * of these banks are core vs package scope. For now every CPU clears
- * every bank
- */
- for (i = 0; i < num_banks; i++)
- msr_write(MSR_IA32_MC0_STATUS + (i * 4), msr);
-}
-
-static void enable_lapic_tpr(void)
-{
- msr_t msr;
-
- msr = msr_read(MSR_PIC_MSG_CONTROL);
- msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
- msr_write(MSR_PIC_MSG_CONTROL, msr);
-}
-
-
-static void configure_c_states(void)
-{
- msr_t msr;
-
- msr = msr_read(MSR_PMG_CST_CONFIG_CONTROL);
- msr.lo |= (1 << 31); /* Timed MWAIT Enable */
- msr.lo |= (1 << 30); /* Package c-state Undemotion Enable */
- msr.lo |= (1 << 29); /* Package c-state Demotion Enable */
- msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */
- msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */
- msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */
- msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */
- msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */
- /* The deepest package c-state defaults to factory-configured value */
- msr_write(MSR_PMG_CST_CONFIG_CONTROL, msr);
-
- msr = msr_read(MSR_MISC_PWR_MGMT);
- msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */
- msr_write(MSR_MISC_PWR_MGMT, msr);
-
- msr = msr_read(MSR_POWER_CTL);
- msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */
- msr.lo |= (1 << 1); /* C1E Enable */
- msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */
- msr_write(MSR_POWER_CTL, msr);
-
- /* C-state Interrupt Response Latency Control 0 - package C3 latency */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_0, msr);
-
- /* C-state Interrupt Response Latency Control 1 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_1, msr);
-
- /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_2, msr);
-
- /* C-state Interrupt Response Latency Control 3 - package C8 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_3_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_3, msr);
-
- /* C-state Interrupt Response Latency Control 4 - package C9 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_4_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_4, msr);
-
- /* C-state Interrupt Response Latency Control 5 - package C10 */
- msr.hi = 0;
- msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_5_LIMIT;
- msr_write(MSR_C_STATE_LATENCY_CONTROL_5, msr);
-}
-
-static void configure_misc(void)
-{
- msr_t msr;
-
- msr = msr_read(MSR_IA32_MISC_ENABLE);
- msr.lo |= (1 << 0); /* Fast String enable */
- msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
- msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
- msr_write(MSR_IA32_MISC_ENABLE, msr);
-
- /* Disable thermal interrupts */
- msr.lo = 0;
- msr.hi = 0;
- msr_write(MSR_IA32_THERM_INTERRUPT, msr);
-
- /* Enable package critical interrupt only */
- msr.lo = 1 << 4;
- msr.hi = 0;
- msr_write(MSR_IA32_PACKAGE_THERM_INTERRUPT, msr);
-}
-
-static void configure_thermal_target(struct udevice *dev)
-{
- int tcc_offset;
- msr_t msr;
-
- tcc_offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "intel,tcc-offset", 0);
-
- /* Set TCC activaiton offset if supported */
- msr = msr_read(MSR_PLATFORM_INFO);
- if ((msr.lo & (1 << 30)) && tcc_offset) {
- msr = msr_read(MSR_TEMPERATURE_TARGET);
- msr.lo &= ~(0xf << 24); /* Bits 27:24 */
- msr.lo |= (tcc_offset & 0xf) << 24;
- msr_write(MSR_TEMPERATURE_TARGET, msr);
- }
-}
-
-static void configure_dca_cap(void)
-{
- struct cpuid_result cpuid_regs;
- msr_t msr;
-
- /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
- cpuid_regs = cpuid(1);
- if (cpuid_regs.ecx & (1 << 18)) {
- msr = msr_read(MSR_IA32_PLATFORM_DCA_CAP);
- msr.lo |= 1;
- msr_write(MSR_IA32_PLATFORM_DCA_CAP, msr);
- }
-}
-
-static void set_energy_perf_bias(u8 policy)
-{
- msr_t msr;
- int ecx;
-
- /* Determine if energy efficient policy is supported */
- ecx = cpuid_ecx(0x6);
- if (!(ecx & (1 << 3)))
- return;
-
- /* Energy Policy is bits 3:0 */
- msr = msr_read(MSR_IA32_ENERGY_PERFORMANCE_BIAS);
- msr.lo &= ~0xf;
- msr.lo |= policy & 0xf;
- msr_write(MSR_IA32_ENERGY_PERFORMANCE_BIAS, msr);
-
- debug("cpu: energy policy set to %u\n", policy);
-}
-
-/* All CPUs including BSP will run the following function */
-static void cpu_core_init(struct udevice *dev)
-{
- /* Clear out pending MCEs */
- configure_mca();
-
- /* Enable the local cpu apics */
- enable_lapic_tpr();
-
- /* Configure C States */
- configure_c_states();
-
- /* Configure Enhanced SpeedStep and Thermal Sensors */
- configure_misc();
-
- /* Thermal throttle activation offset */
- configure_thermal_target(dev);
-
- /* Enable Direct Cache Access */
- configure_dca_cap();
-
- /* Set energy policy */
- set_energy_perf_bias(ENERGY_POLICY_NORMAL);
-
- /* Enable Turbo */
- turbo_enable();
-}
-
-/*
- * Configure processor power limits if possible
- * This must be done AFTER set of BIOS_RESET_CPL
- */
-void cpu_set_power_limits(int power_limit_1_time)
-{
- msr_t msr;
- msr_t limit;
- unsigned power_unit;
- unsigned tdp, min_power, max_power, max_time;
- u8 power_limit_1_val;
-
- msr = msr_read(MSR_PLATFORM_INFO);
- if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr))
- power_limit_1_time = 28;
-
- if (!(msr.lo & PLATFORM_INFO_SET_TDP))
- return;
-
- /* Get units */
- msr = msr_read(MSR_PKG_POWER_SKU_UNIT);
- power_unit = 2 << ((msr.lo & 0xf) - 1);
-
- /* Get power defaults for this SKU */
- msr = msr_read(MSR_PKG_POWER_SKU);
- tdp = msr.lo & 0x7fff;
- min_power = (msr.lo >> 16) & 0x7fff;
- max_power = msr.hi & 0x7fff;
- max_time = (msr.hi >> 16) & 0x7f;
-
- debug("CPU TDP: %u Watts\n", tdp / power_unit);
-
- if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time)
- power_limit_1_time = power_limit_time_msr_to_sec[max_time];
-
- if (min_power > 0 && tdp < min_power)
- tdp = min_power;
-
- if (max_power > 0 && tdp > max_power)
- tdp = max_power;
-
- power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time];
-
- /* Set long term power limit to TDP */
- limit.lo = 0;
- limit.lo |= tdp & PKG_POWER_LIMIT_MASK;
- limit.lo |= PKG_POWER_LIMIT_EN;
- limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) <<
- PKG_POWER_LIMIT_TIME_SHIFT;
-
- /* Set short term power limit to 1.25 * TDP */
- limit.hi = 0;
- limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK;
- limit.hi |= PKG_POWER_LIMIT_EN;
- /* Power limit 2 time is only programmable on server SKU */
-
- msr_write(MSR_PKG_POWER_LIMIT, limit);
-
- /* Set power limit values in MCHBAR as well */
- writel(limit.lo, MCHBAR_REG(MCH_PKG_POWER_LIMIT_LO));
- writel(limit.hi, MCHBAR_REG(MCH_PKG_POWER_LIMIT_HI));
-
- /* Set DDR RAPL power limit by copying from MMIO to MSR */
- msr.lo = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_LO));
- msr.hi = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_HI));
- msr_write(MSR_DDR_RAPL_LIMIT, msr);
-
- /* Use nominal TDP values for CPUs with configurable TDP */
- if (cpu_config_tdp_levels()) {
- msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
- limit.hi = 0;
- limit.lo = msr.lo & 0xff;
- msr_write(MSR_TURBO_ACTIVATION_RATIO, limit);
- }
-}
-
-static int broadwell_get_info(struct udevice *dev, struct cpu_info *info)
-{
- msr_t msr;
-
- msr = msr_read(IA32_PERF_CTL);
- info->cpu_freq = ((msr.lo >> 8) & 0xff) * BROADWELL_BCLK * 1000000;
- info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU |
- 1 << CPU_FEAT_UCODE | 1 << CPU_FEAT_DEVICE_ID;
-
- return 0;
-}
-
-static int broadwell_get_count(struct udevice *dev)
-{
- return 4;
-}
-
-static int cpu_x86_broadwell_probe(struct udevice *dev)
-{
- if (dev->seq == 0) {
- cpu_core_init(dev);
- return broadwell_init(dev);
- }
-
- return 0;
-}
-
-static const struct cpu_ops cpu_x86_broadwell_ops = {
- .get_desc = cpu_x86_get_desc,
- .get_info = broadwell_get_info,
- .get_count = broadwell_get_count,
- .get_vendor = cpu_x86_get_vendor,
-};
-
-static const struct udevice_id cpu_x86_broadwell_ids[] = {
- { .compatible = "intel,core-i3-gen5" },
- { }
-};
-
-U_BOOT_DRIVER(cpu_x86_broadwell_drv) = {
- .name = "cpu_x86_broadwell",
- .id = UCLASS_CPU,
- .of_match = cpu_x86_broadwell_ids,
- .bind = cpu_x86_bind,
- .probe = cpu_x86_broadwell_probe,
- .ops = &cpu_x86_broadwell_ops,
- .priv_auto_alloc_size = sizeof(struct cpu_broadwell_priv),
- .flags = DM_FLAG_PRE_RELOC,
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * Based on code from coreboot src/soc/intel/broadwell/cpu.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <cpu.h>
+#include <asm/cpu.h>
+#include <asm/cpu_x86.h>
+#include <asm/cpu_common.h>
+#include <asm/intel_regs.h>
+#include <asm/msr.h>
+#include <asm/post.h>
+#include <asm/turbo.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/rcb.h>
+
+struct cpu_broadwell_priv {
+ bool ht_disabled;
+};
+
+/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */
+static const u8 power_limit_time_sec_to_msr[] = {
+ [0] = 0x00,
+ [1] = 0x0a,
+ [2] = 0x0b,
+ [3] = 0x4b,
+ [4] = 0x0c,
+ [5] = 0x2c,
+ [6] = 0x4c,
+ [7] = 0x6c,
+ [8] = 0x0d,
+ [10] = 0x2d,
+ [12] = 0x4d,
+ [14] = 0x6d,
+ [16] = 0x0e,
+ [20] = 0x2e,
+ [24] = 0x4e,
+ [28] = 0x6e,
+ [32] = 0x0f,
+ [40] = 0x2f,
+ [48] = 0x4f,
+ [56] = 0x6f,
+ [64] = 0x10,
+ [80] = 0x30,
+ [96] = 0x50,
+ [112] = 0x70,
+ [128] = 0x11,
+};
+
+/* Convert POWER_LIMIT_1_TIME MSR value to seconds */
+static const u8 power_limit_time_msr_to_sec[] = {
+ [0x00] = 0,
+ [0x0a] = 1,
+ [0x0b] = 2,
+ [0x4b] = 3,
+ [0x0c] = 4,
+ [0x2c] = 5,
+ [0x4c] = 6,
+ [0x6c] = 7,
+ [0x0d] = 8,
+ [0x2d] = 10,
+ [0x4d] = 12,
+ [0x6d] = 14,
+ [0x0e] = 16,
+ [0x2e] = 20,
+ [0x4e] = 24,
+ [0x6e] = 28,
+ [0x0f] = 32,
+ [0x2f] = 40,
+ [0x4f] = 48,
+ [0x6f] = 56,
+ [0x10] = 64,
+ [0x30] = 80,
+ [0x50] = 96,
+ [0x70] = 112,
+ [0x11] = 128,
+};
+
+/*
+ * The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate
+ * the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly
+ * when a core is woken up
+ */
+static int pcode_ready(void)
+{
+ int wait_count;
+ const int delay_step = 10;
+
+ wait_count = 0;
+ do {
+ if (!(readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) &
+ MAILBOX_RUN_BUSY))
+ return 0;
+ wait_count += delay_step;
+ udelay(delay_step);
+ } while (wait_count < 1000);
+
+ return -ETIMEDOUT;
+}
+
+static u32 pcode_mailbox_read(u32 command)
+{
+ int ret;
+
+ ret = pcode_ready();
+ if (ret) {
+ debug("PCODE: mailbox timeout on wait ready\n");
+ return ret;
+ }
+
+ /* Send command and start transaction */
+ writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
+
+ ret = pcode_ready();
+ if (ret) {
+ debug("PCODE: mailbox timeout on completion\n");
+ return ret;
+ }
+
+ /* Read mailbox */
+ return readl(MCHBAR_REG(BIOS_MAILBOX_DATA));
+}
+
+static int pcode_mailbox_write(u32 command, u32 data)
+{
+ int ret;
+
+ ret = pcode_ready();
+ if (ret) {
+ debug("PCODE: mailbox timeout on wait ready\n");
+ return ret;
+ }
+
+ writel(data, MCHBAR_REG(BIOS_MAILBOX_DATA));
+
+ /* Send command and start transaction */
+ writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
+
+ ret = pcode_ready();
+ if (ret) {
+ debug("PCODE: mailbox timeout on completion\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/* @dev is the CPU device */
+static void initialize_vr_config(struct udevice *dev)
+{
+ int ramp, min_vid;
+ msr_t msr;
+
+ debug("Initializing VR config\n");
+
+ /* Configure VR_CURRENT_CONFIG */
+ msr = msr_read(MSR_VR_CURRENT_CONFIG);
+ /*
+ * Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid
+ * on ULT systems
+ */
+ msr.hi &= 0xc0000000;
+ msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A */
+ msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A */
+ msr.hi |= (0x14 << (32 - 32)); /* PSI1 threshold - 20A */
+ msr.hi |= (1 << (62 - 32)); /* Enable PSI4 */
+ /* Leave the max instantaneous current limit (12:0) to default */
+ msr_write(MSR_VR_CURRENT_CONFIG, msr);
+
+ /* Configure VR_MISC_CONFIG MSR */
+ msr = msr_read(MSR_VR_MISC_CONFIG);
+ /* Set the IOUT_SLOPE scalar applied to dIout in U10.1.9 format */
+ msr.hi &= ~(0x3ff << (40 - 32));
+ msr.hi |= (0x200 << (40 - 32)); /* 1.0 */
+ /* Set IOUT_OFFSET to 0 */
+ msr.hi &= ~0xff;
+ /* Set entry ramp rate to slow */
+ msr.hi &= ~(1 << (51 - 32));
+ /* Enable decay mode on C-state entry */
+ msr.hi |= (1 << (52 - 32));
+ /* Set the slow ramp rate */
+ msr.hi &= ~(0x3 << (53 - 32));
+ /* Configure the C-state exit ramp rate */
+ ramp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "intel,slow-ramp", -1);
+ if (ramp != -1) {
+ /* Configured slow ramp rate */
+ msr.hi |= ((ramp & 0x3) << (53 - 32));
+ /* Set exit ramp rate to slow */
+ msr.hi &= ~(1 << (50 - 32));
+ } else {
+ /* Fast ramp rate / 4 */
+ msr.hi |= (0x01 << (53 - 32));
+ /* Set exit ramp rate to fast */
+ msr.hi |= (1 << (50 - 32));
+ }
+ /* Set MIN_VID (31:24) to allow CPU to have full control */
+ msr.lo &= ~0xff000000;
+ min_vid = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "intel,min-vid", 0);
+ msr.lo |= (min_vid & 0xff) << 24;
+ msr_write(MSR_VR_MISC_CONFIG, msr);
+
+ /* Configure VR_MISC_CONFIG2 MSR */
+ msr = msr_read(MSR_VR_MISC_CONFIG2);
+ msr.lo &= ~0xffff;
+ /*
+ * Allow CPU to control minimum voltage completely (15:8) and
+ * set the fast ramp voltage in 10mV steps
+ */
+ if (cpu_get_family_model() == BROADWELL_FAMILY_ULT)
+ msr.lo |= 0x006a; /* 1.56V */
+ else
+ msr.lo |= 0x006f; /* 1.60V */
+ msr_write(MSR_VR_MISC_CONFIG2, msr);
+
+ /* Set C9/C10 VCC Min */
+ pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f);
+}
+
+static int calibrate_24mhz_bclk(void)
+{
+ int err_code;
+ int ret;
+
+ ret = pcode_ready();
+ if (ret)
+ return ret;
+
+ /* A non-zero value initiates the PCODE calibration */
+ writel(~0, MCHBAR_REG(BIOS_MAILBOX_DATA));
+ writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL,
+ MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
+
+ ret = pcode_ready();
+ if (ret)
+ return ret;
+
+ err_code = readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) & 0xff;
+
+ debug("PCODE: 24MHz BLCK calibration response: %d\n", err_code);
+
+ /* Read the calibrated value */
+ writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_READ_CALIBRATION,
+ MCHBAR_REG(BIOS_MAILBOX_INTERFACE));
+
+ ret = pcode_ready();
+ if (ret)
+ return ret;
+
+ debug("PCODE: 24MHz BLCK calibration value: 0x%08x\n",
+ readl(MCHBAR_REG(BIOS_MAILBOX_DATA)));
+
+ return 0;
+}
+
+static void configure_pch_power_sharing(void)
+{
+ u32 pch_power, pch_power_ext, pmsync, pmsync2;
+ int i;
+
+ /* Read PCH Power levels from PCODE */
+ pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER);
+ pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT);
+
+ debug("PCH Power: PCODE Levels 0x%08x 0x%08x\n", pch_power,
+ pch_power_ext);
+
+ pmsync = readl(RCB_REG(PMSYNC_CONFIG));
+ pmsync2 = readl(RCB_REG(PMSYNC_CONFIG2));
+
+ /*
+ * Program PMSYNC_TPR_CONFIG PCH power limit values
+ * pmsync[0:4] = mailbox[0:5]
+ * pmsync[8:12] = mailbox[6:11]
+ * pmsync[16:20] = mailbox[12:17]
+ */
+ for (i = 0; i < 3; i++) {
+ u32 level = pch_power & 0x3f;
+
+ pch_power >>= 6;
+ pmsync &= ~(0x1f << (i * 8));
+ pmsync |= (level & 0x1f) << (i * 8);
+ }
+ writel(pmsync, RCB_REG(PMSYNC_CONFIG));
+
+ /*
+ * Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values
+ * pmsync2[0:4] = mailbox[23:18]
+ * pmsync2[8:12] = mailbox_ext[6:11]
+ * pmsync2[16:20] = mailbox_ext[12:17]
+ * pmsync2[24:28] = mailbox_ext[18:22]
+ */
+ pmsync2 &= ~0x1f;
+ pmsync2 |= pch_power & 0x1f;
+
+ for (i = 1; i < 4; i++) {
+ u32 level = pch_power_ext & 0x3f;
+
+ pch_power_ext >>= 6;
+ pmsync2 &= ~(0x1f << (i * 8));
+ pmsync2 |= (level & 0x1f) << (i * 8);
+ }
+ writel(pmsync2, RCB_REG(PMSYNC_CONFIG2));
+}
+
+static int bsp_init_before_ap_bringup(struct udevice *dev)
+{
+ int ret;
+
+ initialize_vr_config(dev);
+ ret = calibrate_24mhz_bclk();
+ if (ret)
+ return ret;
+ configure_pch_power_sharing();
+
+ return 0;
+}
+
+static int cpu_config_tdp_levels(void)
+{
+ msr_t platform_info;
+
+ /* Bits 34:33 indicate how many levels supported */
+ platform_info = msr_read(MSR_PLATFORM_INFO);
+ return (platform_info.hi >> 1) & 3;
+}
+
+static void set_max_ratio(void)
+{
+ msr_t msr, perf_ctl;
+
+ perf_ctl.hi = 0;
+
+ /* Check for configurable TDP option */
+ if (turbo_get_state() == TURBO_ENABLED) {
+ msr = msr_read(MSR_NHM_TURBO_RATIO_LIMIT);
+ perf_ctl.lo = (msr.lo & 0xff) << 8;
+ } else if (cpu_config_tdp_levels()) {
+ /* Set to nominal TDP ratio */
+ msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
+ perf_ctl.lo = (msr.lo & 0xff) << 8;
+ } else {
+ /* Platform Info bits 15:8 give max ratio */
+ msr = msr_read(MSR_PLATFORM_INFO);
+ perf_ctl.lo = msr.lo & 0xff00;
+ }
+ msr_write(IA32_PERF_CTL, perf_ctl);
+
+ debug("cpu: frequency set to %d\n",
+ ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK);
+}
+
+int broadwell_init(struct udevice *dev)
+{
+ struct cpu_broadwell_priv *priv = dev_get_priv(dev);
+ int num_threads;
+ int num_cores;
+ msr_t msr;
+ int ret;
+
+ msr = msr_read(CORE_THREAD_COUNT_MSR);
+ num_threads = (msr.lo >> 0) & 0xffff;
+ num_cores = (msr.lo >> 16) & 0xffff;
+ debug("CPU has %u cores, %u threads enabled\n", num_cores,
+ num_threads);
+
+ priv->ht_disabled = num_threads == num_cores;
+
+ ret = bsp_init_before_ap_bringup(dev);
+ if (ret)
+ return ret;
+
+ set_max_ratio();
+
+ return ret;
+}
+
+static void configure_mca(void)
+{
+ msr_t msr;
+ const unsigned int mcg_cap_msr = 0x179;
+ int i;
+ int num_banks;
+
+ msr = msr_read(mcg_cap_msr);
+ num_banks = msr.lo & 0xff;
+ msr.lo = 0;
+ msr.hi = 0;
+ /*
+ * TODO(adurbin): This should only be done on a cold boot. Also, some
+ * of these banks are core vs package scope. For now every CPU clears
+ * every bank
+ */
+ for (i = 0; i < num_banks; i++)
+ msr_write(MSR_IA32_MC0_STATUS + (i * 4), msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+ msr_t msr;
+
+ msr = msr_read(MSR_PIC_MSG_CONTROL);
+ msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
+ msr_write(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_c_states(void)
+{
+ msr_t msr;
+
+ msr = msr_read(MSR_PMG_CST_CONFIG_CONTROL);
+ msr.lo |= (1 << 31); /* Timed MWAIT Enable */
+ msr.lo |= (1 << 30); /* Package c-state Undemotion Enable */
+ msr.lo |= (1 << 29); /* Package c-state Demotion Enable */
+ msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */
+ msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */
+ msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */
+ msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */
+ msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */
+ /* The deepest package c-state defaults to factory-configured value */
+ msr_write(MSR_PMG_CST_CONFIG_CONTROL, msr);
+
+ msr = msr_read(MSR_MISC_PWR_MGMT);
+ msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */
+ msr_write(MSR_MISC_PWR_MGMT, msr);
+
+ msr = msr_read(MSR_POWER_CTL);
+ msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */
+ msr.lo |= (1 << 1); /* C1E Enable */
+ msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */
+ msr_write(MSR_POWER_CTL, msr);
+
+ /* C-state Interrupt Response Latency Control 0 - package C3 latency */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_0, msr);
+
+ /* C-state Interrupt Response Latency Control 1 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_1, msr);
+
+ /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_2, msr);
+
+ /* C-state Interrupt Response Latency Control 3 - package C8 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_3_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_3, msr);
+
+ /* C-state Interrupt Response Latency Control 4 - package C9 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_4_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_4, msr);
+
+ /* C-state Interrupt Response Latency Control 5 - package C10 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_5_LIMIT;
+ msr_write(MSR_C_STATE_LATENCY_CONTROL_5, msr);
+}
+
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ msr = msr_read(MSR_IA32_MISC_ENABLE);
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
+ msr_write(MSR_IA32_MISC_ENABLE, msr);
+
+ /* Disable thermal interrupts */
+ msr.lo = 0;
+ msr.hi = 0;
+ msr_write(MSR_IA32_THERM_INTERRUPT, msr);
+
+ /* Enable package critical interrupt only */
+ msr.lo = 1 << 4;
+ msr.hi = 0;
+ msr_write(MSR_IA32_PACKAGE_THERM_INTERRUPT, msr);
+}
+
+static void configure_thermal_target(struct udevice *dev)
+{
+ int tcc_offset;
+ msr_t msr;
+
+ tcc_offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "intel,tcc-offset", 0);
+
+ /* Set TCC activaiton offset if supported */
+ msr = msr_read(MSR_PLATFORM_INFO);
+ if ((msr.lo & (1 << 30)) && tcc_offset) {
+ msr = msr_read(MSR_TEMPERATURE_TARGET);
+ msr.lo &= ~(0xf << 24); /* Bits 27:24 */
+ msr.lo |= (tcc_offset & 0xf) << 24;
+ msr_write(MSR_TEMPERATURE_TARGET, msr);
+ }
+}
+
+static void configure_dca_cap(void)
+{
+ struct cpuid_result cpuid_regs;
+ msr_t msr;
+
+ /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+ cpuid_regs = cpuid(1);
+ if (cpuid_regs.ecx & (1 << 18)) {
+ msr = msr_read(MSR_IA32_PLATFORM_DCA_CAP);
+ msr.lo |= 1;
+ msr_write(MSR_IA32_PLATFORM_DCA_CAP, msr);
+ }
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+ msr_t msr;
+ int ecx;
+
+ /* Determine if energy efficient policy is supported */
+ ecx = cpuid_ecx(0x6);
+ if (!(ecx & (1 << 3)))
+ return;
+
+ /* Energy Policy is bits 3:0 */
+ msr = msr_read(MSR_IA32_ENERGY_PERFORMANCE_BIAS);
+ msr.lo &= ~0xf;
+ msr.lo |= policy & 0xf;
+ msr_write(MSR_IA32_ENERGY_PERFORMANCE_BIAS, msr);
+
+ debug("cpu: energy policy set to %u\n", policy);
+}
+
+/* All CPUs including BSP will run the following function */
+static void cpu_core_init(struct udevice *dev)
+{
+ /* Clear out pending MCEs */
+ configure_mca();
+
+ /* Enable the local cpu apics */
+ enable_lapic_tpr();
+
+ /* Configure C States */
+ configure_c_states();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* Thermal throttle activation offset */
+ configure_thermal_target(dev);
+
+ /* Enable Direct Cache Access */
+ configure_dca_cap();
+
+ /* Set energy policy */
+ set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+ /* Enable Turbo */
+ turbo_enable();
+}
+
+/*
+ * Configure processor power limits if possible
+ * This must be done AFTER set of BIOS_RESET_CPL
+ */
+void cpu_set_power_limits(int power_limit_1_time)
+{
+ msr_t msr;
+ msr_t limit;
+ uint power_unit;
+ uint tdp, min_power, max_power, max_time;
+ u8 power_limit_1_val;
+
+ msr = msr_read(MSR_PLATFORM_INFO);
+ if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr))
+ power_limit_1_time = 28;
+
+ if (!(msr.lo & PLATFORM_INFO_SET_TDP))
+ return;
+
+ /* Get units */
+ msr = msr_read(MSR_PKG_POWER_SKU_UNIT);
+ power_unit = 2 << ((msr.lo & 0xf) - 1);
+
+ /* Get power defaults for this SKU */
+ msr = msr_read(MSR_PKG_POWER_SKU);
+ tdp = msr.lo & 0x7fff;
+ min_power = (msr.lo >> 16) & 0x7fff;
+ max_power = msr.hi & 0x7fff;
+ max_time = (msr.hi >> 16) & 0x7f;
+
+ debug("CPU TDP: %u Watts\n", tdp / power_unit);
+
+ if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time)
+ power_limit_1_time = power_limit_time_msr_to_sec[max_time];
+
+ if (min_power > 0 && tdp < min_power)
+ tdp = min_power;
+
+ if (max_power > 0 && tdp > max_power)
+ tdp = max_power;
+
+ power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time];
+
+ /* Set long term power limit to TDP */
+ limit.lo = 0;
+ limit.lo |= tdp & PKG_POWER_LIMIT_MASK;
+ limit.lo |= PKG_POWER_LIMIT_EN;
+ limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) <<
+ PKG_POWER_LIMIT_TIME_SHIFT;
+
+ /* Set short term power limit to 1.25 * TDP */
+ limit.hi = 0;
+ limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK;
+ limit.hi |= PKG_POWER_LIMIT_EN;
+ /* Power limit 2 time is only programmable on server SKU */
+
+ msr_write(MSR_PKG_POWER_LIMIT, limit);
+
+ /* Set power limit values in MCHBAR as well */
+ writel(limit.lo, MCHBAR_REG(MCH_PKG_POWER_LIMIT_LO));
+ writel(limit.hi, MCHBAR_REG(MCH_PKG_POWER_LIMIT_HI));
+
+ /* Set DDR RAPL power limit by copying from MMIO to MSR */
+ msr.lo = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_LO));
+ msr.hi = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_HI));
+ msr_write(MSR_DDR_RAPL_LIMIT, msr);
+
+ /* Use nominal TDP values for CPUs with configurable TDP */
+ if (cpu_config_tdp_levels()) {
+ msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
+ limit.hi = 0;
+ limit.lo = msr.lo & 0xff;
+ msr_write(MSR_TURBO_ACTIVATION_RATIO, limit);
+ }
+}
+
+static int broadwell_get_info(struct udevice *dev, struct cpu_info *info)
+{
+ msr_t msr;
+
+ msr = msr_read(IA32_PERF_CTL);
+ info->cpu_freq = ((msr.lo >> 8) & 0xff) * BROADWELL_BCLK * 1000000;
+ info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU |
+ 1 << CPU_FEAT_UCODE | 1 << CPU_FEAT_DEVICE_ID;
+
+ return 0;
+}
+
+static int broadwell_get_count(struct udevice *dev)
+{
+ return 4;
+}
+
+static int cpu_x86_broadwell_probe(struct udevice *dev)
+{
+ if (dev->seq == 0) {
+ cpu_core_init(dev);
+ return broadwell_init(dev);
+ }
+
+ return 0;
+}
+
+static const struct cpu_ops cpu_x86_broadwell_ops = {
+ .get_desc = cpu_x86_get_desc,
+ .get_info = broadwell_get_info,
+ .get_count = broadwell_get_count,
+ .get_vendor = cpu_x86_get_vendor,
+};
+
+static const struct udevice_id cpu_x86_broadwell_ids[] = {
+ { .compatible = "intel,core-i3-gen5" },
+ { }
+};
+
+U_BOOT_DRIVER(cpu_x86_broadwell_drv) = {
+ .name = "cpu_x86_broadwell",
+ .id = UCLASS_CPU,
+ .of_match = cpu_x86_broadwell_ids,
+ .bind = cpu_x86_bind,
+ .probe = cpu_x86_broadwell_probe,
+ .ops = &cpu_x86_broadwell_ops,
+ .priv_auto_alloc_size = sizeof(struct cpu_broadwell_priv),
+ .flags = DM_FLAG_PRE_RELOC,
+};
projects / project / bcm63xx / u-boot.git / commitdiff