diff options
| author | Aleksander Jan Bajkowski | 2025-02-09 23:17:30 +0000 |
|---|---|---|
| committer | Hauke Mehrtens | 2025-02-16 15:31:05 +0000 |
| commit | 9772ca190ee45d33129ed2e0df3b3b7bd014a860 (patch) | |
| tree | dcd3396b534a264c0405ed755efd56c2b9308725 | |
| parent | 26d43b039d7a7bcf21b5da08b2ae62d6556d508d (diff) | |
| download | openwrt-9772ca190ee45d33129ed2e0df3b3b7bd014a860.tar.gz | |
mediatek: filogic: upstream LEDs control on 2.5G ports on EX5601
This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. The behaviour of LED1 is the same
as before. The behaviour of 2.5G-WAN LED has been changed. It is only
active when a 2.5G link is detected, which matches the stock software.
Additionally, the name of the WAN led has been changed to INTERNET.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/17952
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
| -rw-r--r-- | target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi | 24 | ||||
| -rw-r--r-- | target/linux/mediatek/filogic/base-files/etc/board.d/01_leds | 4 |
2 files changed, 25 insertions, 3 deletions
diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi b/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi index 02fec97f95..1a90417f19 100644 --- a/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi +++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5601-t0-common.dtsi @@ -214,13 +214,33 @@ phy5: phy@5 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <5>; - mxl,led-config = <0x03f0 0x0 0x0 0x0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + }; + }; }; phy6: phy@6 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <6>; - mxl,led-config = <0x00f0 0x0 0x0 0x0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + }; + }; }; switch@1f { diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 8b2c554fb3..4e1d10a4dc 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -143,8 +143,10 @@ zbtlink,zbt-z8103ax) ;; zyxel,ex5601-t0-stock|\ zyxel,ex5601-t0-ubootmod) + ucidef_set_led_netdev "lan1" "LAN1" "mdio-bus:05:green:lan" "lan1" "link tx rx" + ucidef_set_led_netdev "wan" "2.5G-WAN" "mdio-bus:06:green:wan" "eth1" "link_2500" ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx" - ucidef_set_led_netdev "wan" "WAN" "green:inet" "eth1" "link tx rx" + ucidef_set_led_netdev "internet" "INTERNET" "green:inet" "eth1" "link tx rx" ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx" ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx" ;; |