ipq807x: fix edgecore EAP102 lan/wan

We have a report in the forum, that lan/wan is non-functional
on the EAP102 (https://forum.openwrt.org/t/edgecore-eap102/178449)

Fixing that by swapping label and phy-handle of the dp-nodes and
updating the lan/wan bmp.

Note: the original commiter of the device support seems absent for a
long time in the forum and on the OpenWrt github group.

Tested-by: Antonio Della Selva <antonio.dellaselva@uniurb.it>
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
index 7067f9296879cae1ad98ec58052c0ca4a9bff55c..d40b3f0d241789fdeccd20ea00fe43b4ad3a3386 100644 (file)
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-eap102.dts
@@ -21,8 +21,8 @@
                led-running = &led_system_green;
                led-upgrade = &led_system_green;
                /* Aliases as required by u-boot to patch MAC addresses */
-               ethernet0 = &dp5;
-               ethernet1 = &dp6;
+               ethernet0 = &dp6;
+               ethernet1 = &dp5;
                label-mac-device = &dp5;
        };
 
@@ -343,8 +343,8 @@
 &switch {
        status = "okay";
 
-       switch_lan_bmp = <ESS_PORT6>; /* lan port bitmap */
-       switch_wan_bmp = <ESS_PORT5>; /* wan port bitmap */
+       switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
+       switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
        switch_mac_mode1 = <MAC_MODE_SGMII_CHANNEL0>; /* mac mode for uniphy instance1*/
        switch_mac_mode2 = <MAC_MODE_SGMII_CHANNEL0>; /* mac mode for uniphy instance2*/
 
@@ -368,14 +368,14 @@
 
 &dp5 {
        status = "okay";
-       phy-handle = <&qca8081_28>;
-       label = "wan";
+       phy-handle = <&qca8081_24>;
+       label = "lan";
 };
 
 &dp6 {
        status = "okay";
-       phy-handle = <&qca8081_24>;
-       label = "lan";
+       phy-handle = <&qca8081_28>;
+       label = "wan";
 };
 
 &wifi {