bcm53xx: refactor board.d code in 02_network
authorRafał Miłecki <rafal@milecki.pl>
Fri, 3 Apr 2020 13:55:01 +0000 (15:55 +0200)
committerRafał Miłecki <rafal@milecki.pl>
Tue, 7 Apr 2020 13:50:29 +0000 (15:50 +0200)
1. Use functions for cleaner code
2. Always execute WAN interface generic code

Before this change WAN interface code wasn't executed on all devices due
to an early "exit 0".

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b51ea43f900191bc8ce7411dad39239fac6df4f8)

target/linux/bcm53xx/base-files/etc/board.d/02_network

index 9fd26e72f4d08798bb2f197956f44cbf2d0623ba..f86f12407ffb489f80a7be515fd39768c027b864 100755 (executable)
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
 
-board_config_update
+bcm53xx_setup_interfaces()
+{
+       local board="$1"
 
-board=$(board_name)
+       # On BCM4708 / BCM4709(4) there are 3 Ethernet interfaces connected to 3 switch
+       # ports. It's up to vendor which to use.
+       case "$board" in
+       tenda,ac9)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "8@eth0" "0:wan" "5@eth1"
+               ;;
+       buffalo,wxr-1900dhp| \
+       buffalo,wzr-1750dhp)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "5@eth0"
+               ;;
+       dlink,dir-885l | \
+       netgear,r7900 | \
+       netgear,r8000 | \
+       netgear,r8500)
+               # NVRAM specifies port 8 (eth2) - unsupported by OpenWrt b53
+               # Use port 5 (eth0) as workaround
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
+               ;;
+       luxul,abr-4500-v1|\
+       luxul,xbr-4500-v1)
+               ucidef_add_switch "switch0" \
+                       "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5@eth0"
+               ;;
+       phicomm,k3)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:wan" "5@eth0"
+               ;;
+       *)
+               # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
+               # vlan1ports=3 2 1 0 5*
+               # vlan2ports=4 5u
+               # and early Netgear R8000 was using
+               # vlan1ports=3 2 1 0 5 7 8*
+               vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
+               vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
+               if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
+                  echo "$vlan2ports" | egrep -q "^0 5"; then
+                       ucidef_add_switch "switch0" \
+                               "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@eth0"
+               elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
+                    echo "$vlan2ports" | egrep -q "^0 7"; then
+                       ucidef_add_switch "switch0" \
+                               "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@eth1"
+               elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
+                    echo "$vlan2ports" | egrep -q "^4 8"; then
+                       ucidef_add_switch "switch0" \
+                               "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@eth2"
+               else
+                       ucidef_add_switch "switch0" \
+                               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
+               fi
+               ;;
+       esac
+}
 
-case "$board" in
-tenda,ac9)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "8@eth0" "0:wan" "5@eth1"
-       board_config_flush
-       exit 0
-       ;;
-buffalo,wxr-1900dhp| \
-buffalo,wzr-1750dhp)
-       ucidef_add_switch "switch0" \
-               "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "5@eth0"
-       board_config_flush
-       exit 0
-       ;;
-luxul,abr-4500-v1|\
-luxul,xbr-4500-v1)
-       ucidef_add_switch "switch0" \
-               "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5@eth0"
-       board_config_flush
-       exit 0
-       ;;
-phicomm,k3)
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:wan" "5@eth0"
-       board_config_flush
-       exit 0
-    ;;
-esac
+bcm53xx_setup_macs()
+{
+       local board="$1"
 
-wan_macaddr="$(nvram get wan_hwaddr)"
-case "$board" in
-asus,rt-ac87u)
-       ifname=eth1
-       etXmacaddr=$(nvram get et1macaddr)
-       ;;
-dlink,dir-885l | \
-netgear,r7900 | \
-netgear,r8000 | \
-netgear,r8500)
-       ifname=eth2
-       etXmacaddr=$(nvram get et2macaddr)
-       ;;
-*)
-       ifname=eth0
-       etXmacaddr=$(nvram get et0macaddr)
-       ;;
-esac
+       case "$board" in
+       dlink,dir-885l | \
+       netgear,r7900 | \
+       netgear,r8000 | \
+       netgear,r8500)
+               # As vendor doesn't use eth0 its MAC may be missing. Use one from eth2.
+               et2macaddr="$(nvram get et2macaddr)"
+               [ -n "$et2macaddr" ] && ucidef_set_interface_macaddr "lan" "$et2macaddr"
+               ;;
+       esac
 
-# If WAN MAC isn't explicitly set, calculate it using base MAC as reference.
-[ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" 1)
+       wan_macaddr="$(nvram get wan_hwaddr)"
+       case "$board" in
+       asus,rt-ac87u)
+               etXmacaddr=$(nvram get et1macaddr)
+               ;;
+       dlink,dir-885l | \
+       netgear,r7900 | \
+       netgear,r8000 | \
+       netgear,r8500)
+               etXmacaddr=$(nvram get et2macaddr)
+               ;;
+       *)
+               etXmacaddr=$(nvram get et0macaddr)
+               ;;
+       esac
 
-# Workaround for devices using eth2 connected to (CPU) switch port 8
-case "$board" in
-dlink,dir-885l | \
-netgear,r7900 | \
-netgear,r8000 | \
-netgear,r8500)
-       ifname=eth0
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
+       # If WAN MAC isn't explicitly set, calculate it using base MAC as reference.
+       [ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" 1)
 
-       # These devices should use eth2 so their eth0 interface often has no MAC
-       # assigned. Manually assign eth2's MAC to the LAN.
-       et2macaddr="$(nvram get et2macaddr)"
-       [ -n "$et2macaddr" ] && ucidef_set_interface_macaddr "lan" "$et2macaddr"
        [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan" "$wan_macaddr"
+}
 
-       board_config_flush
-       exit 0
-       ;;
-esac
-
-# NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
-# vlan1ports=3 2 1 0 5*
-# vlan2ports=4 5u
-# and early Netgear R8000 was using
-# vlan1ports=3 2 1 0 5 7 8*
-vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
-vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
-if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
-   echo "$vlan2ports" | egrep -q "^0 5"; then
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname"
-elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
-     echo "$vlan2ports" | egrep -q "^0 7"; then
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname"
-elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
-     echo "$vlan2ports" | egrep -q "^4 8"; then
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname"
-else
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
-fi
-
-[ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan" "$wan_macaddr"
-
+board_config_update
+board=$(board_name)
+bcm53xx_setup_interfaces "$board"
+bcm53xx_setup_macs "$board"
 board_config_flush
 
 exit 0